Recherche avancée

Sur d’autres sites (6877)

• avconv stops streaming after some time

  4 juin 2014, par Dhrumil Doshi

  I am using raspberry-pi board and a usb camera attached with it. i use avconv tool to capture live video from camera and streaming it on network using rtp protocol.

  My command on server(raspberry-pi board) is as below :

  avconv -f video4linux2 -s 160x120 -i /dev/video0 -vcodec mpeg2video -r 25 -pix_fmt yuv420p -me_method epzs -b 2600k -bt 256k -f rtp rtp ://192.168.1.141:8554

  streaming works successfully using this command. Here IP address 192.168.1.141 is the ip address of my client pc. i can play live streaming on client side using vlc successfully.

  But Issue is after some time encoding and streaming on server stop automatically. And command hangs there.

  Output on server is as below :

  $ avconv -f video4linux2 -s 160x120 -v debug -i /dev/video0 -vcodec mpeg2video -r 25 -pix_fmt yuv420p -me_method epzs -b 2600k -bt 256k -f rtp rtp://192.168.1.141:8554
  
  avconv version 0.8.10-6:0.8.10-1+rpi1, Copyright (c) 2000-2013 the Libav developers
  
    built on Mar 22 2014 02:13:15 with gcc 4.6.3
  
    configuration: --arch=arm --enable-pthreads --enable-runtime-cpudetect --extra-version='6:0.8.10-1+rpi1' --libdir=/usr/lib/arm-linux-gnueabihf --prefix=/usr --disable-yasm --enable-bzlib --enable-libdc1394 --enable-libdirac --enable-libfreetype --enable-frei0r --enable-gnutls --enable-libgsm --enable-libmp3lame --enable-librtmp --enable-libopencv --enable-libopenjpeg --enable-libpulse --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-vaapi --enable-vdpau --enable-libvorbis --enable-libvpx --enable-zlib --enable-gpl --enable-postproc --enable-swscale --enable-libcdio --enable-x11grab --enable-libx264 --enable-libxvid --shlibdir=/usr/lib/arm-linux-gnueabihf --enable-shared --disable-static
  
    libavutil    51. 22. 2 / 51. 22. 2
  
    libavcodec   53. 35. 0 / 53. 35. 0
  
    libavformat  53. 21. 1 / 53. 21. 1
  
    libavdevice  53.  2. 0 / 53.  2. 0
  
    libavfilter   2. 15. 0 /  2. 15. 0
  
    libswscale    2.  1. 0 /  2.  1. 0
  
    libpostproc  52.  0. 0 / 52.  0. 0
  
  [video4linux2 @ 0x54d7a0] [4]Capabilities: 84000001
  
  [video4linux2 @ 0x54d7a0] The V4L2 driver changed the pixel format from 0x32315559 to 0x56595559
  
      Last message repeated 1 times
  
  [video4linux2 @ 0x54d7a0] The V4L2 driver changed the pixel format from 0x50323234 to 0x56595559
  
  [video4linux2 @ 0x54d7a0] The V4L2 driver set input_id: 0, input: Camera 1
  
  [rawvideo @ 0x54f860] err{or,}_recognition separate: 1; 1
  
  [rawvideo @ 0x54f860] err{or,}_recognition combined: 1; 1
  
  [video4linux2 @ 0x54d7a0] All info found
  
  [video4linux2 @ 0x54d7a0] Estimating duration from bitrate, this may be inaccurate
  
  Input #0, video4linux2, from '/dev/video0':
  
    Duration: N/A, start: 21891.364784, bitrate: 9216 kb/s
  
      Stream #0.0, 1, 1/1000000: Video: rawvideo, yuyv422, 160x120, 1/30, 9216 kb/s, 30 tbr, 1000k tbn, 30 tbc
  
  [buffer @ 0x54f220] w:160 h:120 pixfmt:yuyv422
  
  [avsink @ 0x54d740] auto-inserting filter 'auto-inserted scaler 0' between the filter 'src' and the filter 'out'
  
  [scale @ 0x54f7e0] w:160 h:120 fmt:yuyv422 -> w:160 h:120 fmt:yuv420p flags:0x4
  
  [mpeg2video @ 0x54ea60] err{or,}_recognition separate: 1; 1
  
  [mpeg2video @ 0x54ea60] err{or,}_recognition combined: 1; 1
  
  [mpeg2video @ 0x54ea60] detected 1 logical cores
  
  [mpeg2video @ 0x54ea60] Unsupported bit depth: 0
  
  [rawvideo @ 0x54f860] err{or,}_recognition separate: 1; 1
  
  [rawvideo @ 0x54f860] err{or,}_recognition combined: 1; 1
  
  Output #0, rtp, to 'rtp://192.168.1.141:8554':
  
    Metadata:
  
      encoder         : Lavf53.21.1
  
      Stream #0.0, 0, 1/90000: Video: mpeg2video, yuv420p, 160x120, 1/25, q=2-31, 2600 kb/s, 90k tbn, 25 tbc
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (rawvideo -> mpeg2video)
  
  SDP:
  
  v=0
  
  o=- 0 0 IN IP4 127.0.0.1
  
  s=No Name
  
  c=IN IP4 192.168.1.141
  
  t=0 0
  
  a=tool:libavformat 53.21.1
  
  m=video 8554 RTP/AVP 32
  
  b=AS:2600
  
  
  
  Press ctrl-c to stop encoding
  
  *** drop!
  
      Last message repeated 1 times
  
  *** 1 dup!
  
  *** 16 dup! fps= 25 q=2.0 size=    1027kB time=5.24 bitrate=1605.2kbits/s dup=1 drop=2    
  
  *** drop!
  
      Last message repeated 11 times
  
  *** drop!49 fps= 26 q=2.0 size=    1059kB time=5.92 bitrate=1464.9kbits/s dup=17 drop=14    
  
      Last message repeated 2 times
  
  *** drop!76 fps= 25 q=2.0 size=    2022kB time=11.00 bitrate=1505.7kbits/s dup=17 drop=17    
  
  *** drop!48 fps= 25 q=2.0 size=    4086kB time=21.88 bitrate=1529.8kbits/s dup=17 drop=18    
  
  *** 1 dup!
  
  *** 1 dup!0 fps= 25 q=2.0 size=    4171kB time=22.36 bitrate=1528.2kbits/s dup=18 drop=19    
  
  *** 1 dup!1 fps= 25 q=2.0 size=    4859kB time=26.00 bitrate=1530.8kbits/s dup=19 drop=19    
  
  *** 1 dup!0 fps= 25 q=2.0 size=    5152kB time=27.56 bitrate=1531.5kbits/s dup=20 drop=19    
  
  *** 1 dup!3 fps= 25 q=2.0 size=    5250kB time=28.08 bitrate=1531.7kbits/s dup=21 drop=19    
  
  *** drop!64 fps= 25 q=2.0 size=    7215kB time=38.52 bitrate=1534.5kbits/s dup=22 drop=19    
  
  *** 1 dup!6 fps= 25 q=2.0 size=    7306kB time=39.00 bitrate=1534.6kbits/s dup=22 drop=20    
  
  *** drop!07 fps= 25 q=2.0 size=    8288kB time=44.24 bitrate=1534.7kbits/s dup=23 drop=20    
  
  *** 1 dup!0 fps= 25 q=2.0 size=   10054kB time=53.56 bitrate=1537.8kbits/s dup=23 drop=21    
  
  *** 1 dup!9 fps= 25 q=2.0 size=   10342kB time=55.12 bitrate=1537.1kbits/s dup=24 drop=21    
  
      Last message repeated 1 times
  
  *** drop!93 fps= 25 q=1.6 size=   10445kB time=55.68 bitrate=1536.7kbits/s dup=26 drop=21    
  
  *** 1 dup!
  
  *** 7036829 dup! 25 q=2.0 size=   10630kB time=56.68 bitrate=1536.4kbits/s dup=27 drop=22 

  Any ideas ?

  Thanks in advance.

• 2 GB Should Be Enough For Me

  31 août 2010, par Multimedia Mike — General

  My new EeePC 1201PN netbook has 2 GB of RAM. Call me shortsighted but I feel like “that ought to be enough for me”. I’m not trying to claim that it ought to be enough for everyone. I am, however, questioning the utility of swap space for those skilled in the art of computing.

  
  
  Technology marches on : This ancient 128 MB RAM module is larger than my digital camera’s battery charger… and I just realized that comparison doesn’t make any sense
  

  Does anyone else have this issue ? It has gotten to the point where I deliberately disable swap partitions on Linux desktops I’m using ('swapoff -a'), and try not to allocate a swap partition during install time. I’m encountering Linux installers that seem to be making it tougher to do this, essentially pleading with you to create a swap partition– “Seriously, you might need 8 total gigabytes of virtual memory one day.” I’m of the opinion that if 2 GB of physical memory isn’t enough for my normal operation, I might need to re-examine my processes.

  In the course of my normal computer usage (which is definitely not normal by the standard of a normal computer user), swap space is just another way for the software to screw things up behind the scenes. In this case, the mistake is performance-related as the software makes poor decisions about what needs to be kept in RAM.

  And then there are the netbook-oriented Linux distributions that insisted upon setting aside as swap 1/2 gigabyte of the already constrained 4 gigabytes of my Eee PC 701′s on-board flash memory, never offering the choice to opt out of swap space during installation. Earmarking flash memory for swap space is generally regarded as exceptionally poor form. To be fair, I don’t know that SSD has been all that prevalent in netbooks since the very earliest units in the netbook epoch.

  Am I alone in this ? Does anyone else prefer to keep all of their memory physical in this day and age ?

• avcodec/nvenc : add UHQ to AV1 for NVENC

  8 janvier, par Diego de Souza

  avcodec/nvenc : add UHQ to AV1 for NVENC
  This commit adds support for Ultra High Quality mode for AV1 on
  
  NVIDIA GPUs.
  Signed-off-by : Diego de Souza <ddesouza@nvidia.com>
  
  Signed-off-by : Timo Rothenpieler <timo@rothenpieler.org>
  

  • [DH] libavcodec/nvenc.h
  • [DH] libavcodec/nvenc_av1.c