Recherche avancée

Sur d’autres sites (4228)

• FFMPEG Steam Stream stop after a few min

  24 novembre 2022, par Fabian Boulegue

  I try set a video stream to STREAM via FFMPEG so far everything works fine but after a few min it just seem to timeout (at last the stream stops but ffmpeg still send everything)

  



  Here is the ffmpeg string

  



  OUTRES="1920x1080"
GOP="60"
GOPMIN="15"
THREADS="4"
CBR="2500k"
QUALITY="ultrafast"
VIDEO="rescue.mp4"
STREAM_KEY="steam_62879128_f5xxxxxxxca5b1c"
SERVER="rtmp://ingest-01-fra1.broadcast.steamcontent.com/app/"

ffmpeg -stream_loop -1 -i $VIDEO -f flv \
-vcodec libx264 -g  $GOP -keyint_min $GOPMIN -b:v $CBR -minrate $CBR -maxrate $CBR -pix_fmt yuv420p \
-s $OUTRES -flvflags no_duration_filesize -preset $QUALITY -tune film -acodec aac -threads $THREADS -strict normal \
-bufsize $CBR "$SERVER$STREAM_KEY"


  



  this is the ffmpeg output

  



    ffmpeg version 3.4.6-0ubuntu0.18.04.1 Copyright (c) 2000-2019 the FFmpeg developers
  built with gcc 7 (Ubuntu 7.3.0-16ubuntu3)
  configuration: --prefix=/usr --extra-version=0ubuntu0.18.04.1 --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --enable-gpl --disable-stripping --enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librubberband --enable-librsvg --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libopencv --enable-libx264 --enable-shared
  libavutil      55. 78.100 / 55. 78.100
  libavcodec     57.107.100 / 57.107.100
  libavformat    57. 83.100 / 57. 83.100
  libavdevice    57. 10.100 / 57. 10.100
  libavfilter     6.107.100 /  6.107.100
  libavresample   3.  7.  0 /  3.  7.  0
  libswscale      4.  8.100 /  4.  8.100
  libswresample   2.  9.100 /  2.  9.100
  libpostproc    54.  7.100 / 54.  7.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'rescue.mp4':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf57.83.100
  Duration: 00:44:48.08, start: 0.000000, bitrate: 2250 kb/s
    Stream #0:0(und): Video: h264 (High) (avc1 / 0x31637661), yuv420p(tv, bt709), 1920x1080 [SAR 1:1 DAR 16:9], 2114 kb/s, 30 fps, 30 tbr, 15360 tbn, 60 tbc (default)
    Metadata:
      handler_name    : VideoHandler
    Stream #0:1(eng): Audio: aac (LC) (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 127 kb/s (default)
    Metadata:
      handler_name    : SoundHandler
Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (libx264))
  Stream #0:1 -> #0:1 (aac (native) -> aac (native))
Press [q] to stop, [?] for help
[libx264 @ 0x55a3ddc7e520] using SAR=1/1
[libx264 @ 0x55a3ddc7e520] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX
[libx264 @ 0x55a3ddc7e520] profile Constrained Baseline, level 4.0
[libx264 @ 0x55a3ddc7e520] 264 - core 152 r2854 e9a5903 - H.264/MPEG-4 AVC codec - Copyleft 2003-2017 - http://www.videolan.org/x264.html - options: cabac=0 ref=1 deblock=0:-1:-1 analyse=0:0 me=dia subme=0 psy=1 psy_rd=1.00:0.15 mixed_ref=0 me_range=16 chroma_me=1 trellis=0 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=0 threads=4 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=0 weightp=0 keyint=60 keyint_min=15 scenecut=0 intra_refresh=0 rc_lookahead=0 rc=cbr mbtree=0 bitrate=2500 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 vbv_maxrate=2500 vbv_bufsize=2500 nal_hrd=none filler=0 ip_ratio=1.40 aq=0
Output #0, flv, to 'rtmp://ingest-01-fra1.broadcast.steamcontent.com/app/steam_62879128_f5999013aeca5b1c':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf57.83.100
    Stream #0:0(und): Video: h264 (libx264) ([7][0][0][0] / 0x0007), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], q=-1--1, 2500 kb/s, 30 fps, 1k tbn, 30 tbc (default)
    Metadata:
      handler_name    : VideoHandler
      encoder         : Lavc57.107.100 libx264
    Side data:
      cpb: bitrate max/min/avg: 2500000/0/2500000 buffer size: 2500000 vbv_delay: -1
    Stream #0:1(eng): Audio: aac (LC) ([10][0][0][0] / 0x000A), 44100 Hz, stereo, fltp, 128 kb/s (default)
    Metadata:
      handler_name    : SoundHandler
      encoder         : Lavc57.107.100 aac
frame=  479 fps= 74 q=-1.0 Lsize=    4669kB time=00:00:16.13 bitrate=2370.2kbits/s speed=2.49x


  


• FFmpeg stops encoding when log file reaches 388 kB

  30 janvier 2018, par Rune Aspvik

  I’m using ffmpeg in a node application with this command :

  ffmpeg -seekable 0 -i http://127.0.0.1:8100/Mjpeg/1?authToken=xxx -video_size 1280x720 -r 30 -pix_fmt yuv420p -y D:\Video\pflyers\test.mp4

  The encoding would stop after 28:53 every time. After some reading I figured I had to spawn the child instead of exec because of the large sterr output.

  Before doing that I wanted to see if that was in fact the issue so I tried doing :

  -nostats -hide_banner -loglevel panic

  to avoid the large output to sterr. FFmpeg still stopped after 28:53. Further I tried to write the sterr to log.txt instead of using the above code. I did so adding this to the end :

  2> log.txt

  Still it would stop at 28:53.

  Finally I tried running the command in cmd.exe resulting in the encoding stopping at 29:14.

  What I realized comparing the outputs from ffmpeg run from node and run from cmd.exe was that the encoding stopped when the log.txt reached 388kB.

  How can I fix this ?

  Here’s the full output :

  C:\Users\VossVind>ffmpeg -seekable 0 -i http://127.0.0.1:8100/Mjpeg/1?authToken=xxx -video_size 1280x720 -r 30 -pix_fmt yuv420p -y D:\Video\pflyers\test.mp4
  
  ffmpeg version 3.4 Copyright (c) 2000-2017 the FFmpeg developers
  
    built with gcc 7.2.0 (GCC)
  
    configuration: --enable-gpl --enable-version3 --enable-sdl2 --enable-bzlib --enable-fontconfig --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libfreetype --enable-libmp3lame --enable-libopenjpeg --enable-libopus --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libtheora --enable-libtwolame --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libzimg --enable-lzma --enable-zlib --enable-gmp --enable-libvidstab --enable-libvorbis --enable-cuda --enable-cuvid --enable-d3d11va --enable-nvenc --enable-dxva2 --enable-avisynth --enable-libmfx
  
    libavutil      55. 78.100 / 55. 78.100
  
    libavcodec     57.107.100 / 57.107.100
  
    libavformat    57. 83.100 / 57. 83.100
  
    libavdevice    57. 10.100 / 57. 10.100
  
    libavfilter     6.107.100 /  6.107.100
  
    libswscale      4.  8.100 /  4.  8.100
  
    libswresample   2.  9.100 /  2.  9.100
  
    libpostproc    54.  7.100 / 54.  7.100
  
  Input #0, mpjpeg, from 'http://127.0.0.1:8100/Mjpeg/1?authToken=xxx':
  
    Duration: N/A, bitrate: N/A
  
      Stream #0:0: Video: mjpeg, yuvj420p(pc, bt470bg/unknown/unknown), 1280x720 [SAR 96:96 DAR 16:9], 25 tbr, 25 tbn, 25 tbc
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (mjpeg (native) -> h264 (libx264))
  
  Press [q] to stop, [?] for help
  
  [swscaler @ 0000019639b27fc0] deprecated pixel format used, make sure you did set range correctly
  
  [libx264 @ 0000019639944040] using SAR=1/1
  
  [libx264 @ 0000019639944040] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2
  
  [libx264 @ 0000019639944040] profile High, level 3.1
  
  [libx264 @ 0000019639944040] 264 - core 152 r2851 ba24899 - H.264/MPEG-4 AVC codec - Copyleft 2003-2017 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=18 lookahead_threads=3 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
  Output #0, mp4, to 'D:\Video\pflyers\test.mp4':
  
    Metadata:
  
      encoder         : Lavf57.83.100
  
      Stream #0:0: Video: h264 (libx264) (avc1 / 0x31637661), yuv420p, 1280x720 [SAR 1:1 DAR 16:9], q=-1--1, 30 fps, 15360 tbn, 30 tbc
  
      Metadata:
  
        encoder         : Lavc57.107.100 libx264
  
      Side data:
  
        cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
  
  More than 1000 frames duplicated  114432kB time=00:03:17.80 bitrate=4739.3kbits/s dup=1000 drop=0 speed=0.95x
  
  frame=52544 fps= 29 q=-1.0 Lsize= 1050136kB time=00:29:11.36 bitrate=4912.0kbits/s dup=8757 drop=0 speed=0.972x
  
  video:1049508kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.059803%
  
  [libx264 @ 0000019639944040] frame I:261   Avg QP:20.59  size: 51862
  
  [libx264 @ 0000019639944040] frame P:15400 Avg QP:23.72  size: 33007
  
  [libx264 @ 0000019639944040] frame B:36883 Avg QP:24.55  size: 14989
  
  [libx264 @ 0000019639944040] consecutive B-frames:  0.9% 15.8%  2.5% 80.8%
  
  [libx264 @ 0000019639944040] mb I  I16..4: 17.1% 82.1%  0.8%
  
  [libx264 @ 0000019639944040] mb P  I16..4:  4.3% 48.4%  0.2%  P16..4: 12.3%  7.5%  4.8%  0.0%  0.0%    skip:22.5%
  
  [libx264 @ 0000019639944040] mb B  I16..4:  2.7% 15.6%  0.0%  B16..8: 22.3%  7.0%  1.8%  direct: 3.8%  skip:46.8%  L0:52.3% L1:34.0% BI:13.8%
  
  [libx264 @ 0000019639944040] 8x8 transform intra:88.6% inter:92.9%
  
  [libx264 @ 0000019639944040] coded y,uvDC,uvAC intra: 59.4% 33.6% 2.6% inter: 19.3% 10.9% 0.6%
  
  [libx264 @ 0000019639944040] i16 v,h,dc,p: 57% 30% 12%  1%
  
  [libx264 @ 0000019639944040] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 25% 18% 45%  2%  1%  1%  2%  2%  3%
  
  [libx264 @ 0000019639944040] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 52% 24% 12%  2%  2%  2%  2%  2%  2%
  
  [libx264 @ 0000019639944040] i8c dc,h,v,p: 63% 17% 20%  1%
  
  [libx264 @ 0000019639944040] Weighted P-Frames: Y:0.0% UV:0.0%
  
  [libx264 @ 0000019639944040] ref P L0: 43.8%  7.5% 29.1% 19.6%
  
  [libx264 @ 0000019639944040] ref B L0: 71.8% 21.2%  7.0%
  
  [libx264 @ 0000019639944040] ref B L1: 93.9%  6.1%
  
  [libx264 @ 0000019639944040] kb/s:4908.78

• ffmpeg conversion x264 [error] : malloc of size 769152 failed

  4 octobre 2022, par prashanthp

  I am trying to convert video recorded from Android smart watch (.mp4 format) to a format (.mp4) which playable on all browsers. The video recorded from smart watch is not playing in the browsers. so, i've used ffmpeg to convert in into a playable mp4 format.

  



  But sometimes it is showing error as x264 [error]: malloc of size 503008 failed

  



  What is the reason for this. Sometimes it's getting converted and sometimes it is showing error .

  



  Here is the console output.

  



   /usr/local/ffmpeg_build/ffmpeg/bin/ffmpeg  -i /home/xestatt1/public_html/app/webroot/mobile/uploads/in/Dec152014161945.mp4 -vcodec libx264   -r 24 -s 352*288 -acodec aac  -ab 12k -strict -2  /home/xestatt1/public_html/app/webroot/mobile/uploads/out/ot12.mp4

ffmpeg version 2.5.git Copyright (c) 2000-2014 the FFmpeg developers
  built on Dec 13 2014 05:42:08 with gcc 4.1.2 (GCC) 20080704 (Red Hat 4.1.2-55)
  configuration: --prefix=/usr/local/ffmpeg_build/ffmpeg --enable-libx264 --enable-gpl --extra-cflags=-I/usr/local/ffmpeg_build/x264/include --extra-ldflags=-L/usr/local/ffmpeg_build/x264/lib
  libavutil      54. 15.100 / 54. 15.100
  libavcodec     56. 14.100 / 56. 14.100
  libavformat    56. 15.103 / 56. 15.103
  libavdevice    56.  3.100 / 56.  3.100
  libavfilter     5.  2.103 /  5.  2.103
  libswscale      3.  1.101 /  3.  1.101
  libswresample   1.  1.100 /  1.  1.100
  libpostproc    53.  3.100 / 53.  3.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from '/home/xestatt1/public_html/app/webroot/mobile/uploads/in/Dec152014161945.mp4':
  Metadata:
    major_brand     : 3gp4
    minor_version   : 0
    compatible_brands: isom3gp4
    creation_time   : 2014-12-15 10:50:02
  Duration: 00:00:10.12, start: 0.000000, bitrate: 151 kb/s
    Stream #0:0(eng): Video: mpeg4 (Simple Profile) (mp4v / 0x7634706D), yuv420p, 320x240 [SAR 1:1 DAR 4:3], 135 kb/s, 13.14 fps, 50 tbr, 90k tbn, 200 tbc (default)
    Metadata:
      creation_time   : 2014-12-15 10:50:02
      handler_name    : VideoHandle
      encoder         :
    Stream #0:1(eng): Audio: amr_nb (samr / 0x726D6173), 8000 Hz, mono, flt, 12 kb/s (default)
    Metadata:
      creation_time   : 2014-12-15 10:50:02
      handler_name    : SoundHandle
File '/home/xestatt1/public_html/app/webroot/mobile/uploads/out/ot12.mp4' already exists. Overwrite ? [y/N] y
[libx264 @ 0x13b69120] using SAR=12/11
[libx264 @ 0x13b69120] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.1 Cache64
[libx264 @ 0x13b69120] profile High, level 1.3
[libx264 @ 0x13b69120] 264 - core 142 - H.264/MPEG-4 AVC codec - Copyleft 2003-2014 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=24 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to '/home/xestatt1/public_html/app/webroot/mobile/uploads/out/ot12.mp4':
  Metadata:
    major_brand     : 3gp4
    minor_version   : 0
    compatible_brands: isom3gp4
    encoder         : Lavf56.15.103
    Stream #0:0(eng): Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 352x288 [SAR 12:11 DAR 4:3], q=-1--1, 24 fps, 12288 tbn, 24 tbc (default)
    Metadata:
      creation_time   : 2014-12-15 10:50:02
      handler_name    : VideoHandle
      encoder         : Lavc56.14.100 libx264
    Stream #0:1(eng): Audio: aac ([64][0][0][0] / 0x0040), 8000 Hz, mono, fltp, 12 kb/s (default)
    Metadata:
      creation_time   : 2014-12-15 10:50:02
      handler_name    : SoundHandle
      encoder         : Lavc56.14.100 aac
Stream mapping:
  Stream #0:0 -> #0:0 (mpeg4 (native) -> h264 (libx264))
  Stream #0:1 -> #0:1 (amr_nb (amrnb) -> aac (native))
Press [q] to stop, [?] for help
Past duration 1.000000 too large
Multiple frames in a packet from stream 1
Past duration 1.000000 too large
av_interleaved_write_frame(): Cannot allocate memory
x264 [error]: malloc of size 769152 failed
Video encoding failed
[libx264 @ 0x13b69120] frame I:1     Avg QP:22.20  size:  3166
[libx264 @ 0x13b69120] mb I  I16..4: 28.3% 70.5%  1.3%
[libx264 @ 0x13b69120] 8x8 transform intra:70.5%
[libx264 @ 0x13b69120] coded y,uvDC,uvAC intra: 47.5% 55.3% 12.4%
[libx264 @ 0x13b69120] i16 v,h,dc,p: 16% 26%  6% 52%
[libx264 @ 0x13b69120] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 24% 19% 15% 12%  3%  3%  3%  5% 16%
[libx264 @ 0x13b69120] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 16%  2% 20% 10% 16% 14%  4% 11%  6%
[libx264 @ 0x13b69120] i8c dc,h,v,p: 61% 17% 19%  4%
[libx264 @ 0x13b69120] kb/s:607.87
[aac @ 0x13b6a4c0] 2 frames left in the queue on closing
Conversion failed!


  



  UPDATED

  



  When i execute this from shell it is working fine. But when i create a script file and trying to execute that script file from php , it is showing error's. I increased the memory limit in php, still it is showing error. Also , we are using ZEND framework. Is there any problems with ZEND ??