Recherche avancée

Sur d’autres sites (6340)

• Build FFMPEG with x264 for Android

  12 novembre 2016, par Kage

  I am trying to build FFMPEG with libx264 for Android.

  I can successfully build and use FFMPEG for Android but I realized that I need the ability to encode, therefore I am trying to build FFMPEG with x264.

  I am using this tutorial to build FFmpeg for Android http://www.roman10.net/how-to-build-ffmpeg-for-android/

  When trying to build FFMPEG I get an error :

  "ERROR : libx264 not found"

  And in my log it says :

  "/usr/local/lib/libx264.a : could not read symbols : Archive has no
  index ; run ranlib to add one..."

  I have the latest versions of both FFMPEG and x264.
  I understand that FFMPEG looks for the header and libraries in usr/lib and usr/include, so in order to make it find x264 I use the cflags and ldflags :

  • —extra-cflags = " -I/usr/local/include "
  • —extra-ldflags = " -L/usr/local/lib "

  I have tried building x264 with many different options that other people on the internet have said that i need. eg. —enable-shared, —enable-static, —disable-pthreads etc.
  Some forums say enable this, others say no disable that.

  Any help would be much appreciated,
  Thanks

  EDIT :

  If I build FFmpeg with the simplest commands to include libx264 then it works.
  ie.

  ./configure --enable-gpl --enable-libx264 --extra-cflags="-I/usr/local/include" --extra-ldflags="-L/usr/local/lib" --enable-static --enable-shared

  However I need it to work for Android. The script I am using is :

  NDK=~/Desktop/android-ndk-r7
  
  PLATFORM=$NDK/platforms/android-8/arch-arm/
  
  PREBUILT=$NDK/toolchains/arm-linux-androideabi-4.4.3/prebuilt/darwin-x86
  
  function build_one
  
  {
  
  ./configure --target-os=linux \
  
      --prefix=$PREFIX \
  
      --enable-cross-compile \
  
      --enable-shared \
  
      --enable-static \
  
      --extra-libs="-lgcc" \
  
      --arch=arm \
  
      --cc=$PREBUILT/bin/arm-linux-androideabi-gcc \
  
      --cross-prefix=$PREBUILT/bin/arm-linux-androideabi- \
  
      --nm=$PREBUILT/bin/arm-linux-androideabi-nm \
  
      --sysroot=$PLATFORM \
  
      --extra-cflags=" -O3 -fpic -DANDROID -DHAVE_SYS_UIO_H=1 -Dipv6mr_interface=ipv6mr_ifindex -fasm -Wno-psabi -fno-short-enums -fno-strict-aliasing -finline-limit=300 $OPTIMIZE_CFLAGS -I/usr/local/include" \
  
      --extra-ldflags="-Wl,-rpath-link=$PLATFORM/usr/lib -L $PLATFORM/usr/lib -nostdlib -lc -lm -ldl -llog -L/usr/local/lib " \
  
      --enable-gpl \
  
      --enable-libx264 \
  
      --disable-everything \
  
      --enable-demuxer=mov \
  
      --enable-demuxer=h264 \
  
      --disable-ffplay \
  
      --enable-protocol=file \
  
      --enable-avformat \
  
      --enable-avcodec \
  
      --enable-decoder=rawvideo \
  
      --enable-decoder=mjpeg \
  
      --enable-decoder=h263 \
  
      --enable-decoder=mpeg4 \
  
      --enable-decoder=h264 \
  
      --enable-encoder=mjpeg \
  
      --enable-encoder=h263 \
  
      --enable-encoder=mpeg4 \
  
      --enable-encoder=h264 \
  
      --enable-parser=h264 \
  
      --disable-network \
  
      --enable-zlib \
  
      --disable-avfilter \
  
      --disable-avdevice \
  
      $ADDITIONAL_CONFIGURE_FLAG
  
  
  
  make clean
  
  make  -j4 install
  
  $PREBUILT/bin/arm-linux-androideabi-ar d libavcodec/libavcodec.a inverse.o
  
  $PREBUILT/bin/arm-linux-androideabi-ld -rpath-link=$PLATFORM/usr/lib -L$PLATFORM/usr/lib  -soname libffmpeg.so -shared -nostdlib  -z,noexecstack -Bsymbolic --whole-archive --no-undefined -o $PREFIX/libffmpeg.so libavcodec/libavcodec.a libavformat/libavformat.a libavutil/libavutil.a libswscale/libswscale.a -lc -lm -lz -ldl -llog  --warn-once  --dynamic-linker=/system/bin/linker $PREBUILT/lib/gcc/arm-linux-androideabi/4.4.3/libgcc.a
  
  }
  
  
  
  CPU=armv7-a
  
  OPTIMIZE_CFLAGS="-mfloat-abi=softfp -mfpu=vfpv3-d16 -marm -march=$CPU "
  
  PREFIX=./android/$CPU
  
  ADDITIONAL_CONFIGURE_FLAG=
  
  build_one

  I am guessing that some option in my configure command is conflicting with enabling libx264

  NOTE : If I remove —enable-libx264 then it works

• error : ‘CODEC_TYPE_AUDIO’ undeclared when make m3u8-segmenter

  28 février 2012, par why

  I want to make m3u8-segmenter for Http Live Stream : https://github.com/johnf/m3u8-segmenter

  There are errors when I make, the errors are :

  gcc -g -O -Wall -Wstrict-prototypes -Wmissing-prototypes -Waggregate-return -Wcast-align -Wcast-qual -Wnested-externs -Wshadow -Wbad-function-cast -Wwrite-strings -Werror m3u8-segmenter.c -o m3u8-segmenter -lavformat -lavcodec -lavutil
  
  m3u8-segmenter.c: In function ‘add_output_stream’:
  
  m3u8-segmenter.c:82:14: error: ‘CODEC_TYPE_AUDIO’ undeclared (first use in this function)
  
  m3u8-segmenter.c:82:14: note: each undeclared identifier is reported only once for each function it appears in
  
  m3u8-segmenter.c:94:14: error: ‘CODEC_TYPE_VIDEO’ undeclared (first use in this function)
  
  m3u8-segmenter.c: In function ‘main’:
  
  m3u8-segmenter.c:338:5: error: ‘av_open_input_file’ is deprecated (declared at /usr/local/include/libavformat/avformat.h:1090) [-Werror=deprecated-declarations]
  
  m3u8-segmenter.c:352:5: error: implicit declaration of function ‘guess_format’ [-Werror=implicit-function-declaration]
  
  m3u8-segmenter.c:352:5: error: nested extern declaration of ‘guess_format’ [-Werror=nested-externs]
  
  m3u8-segmenter.c:352:10: error: assignment makes pointer from integer without a cast [-Werror]
  
  m3u8-segmenter.c:371:18: error: ‘CODEC_TYPE_VIDEO’ undeclared (first use in this function)
  
  m3u8-segmenter.c:376:18: error: ‘CODEC_TYPE_AUDIO’ undeclared (first use in this function)
  
  m3u8-segmenter.c:387:5: error: ‘av_set_parameters’ is deprecated (declared at /usr/local/include/libavformat/avformat.h:1434) [-Werror=deprecated-declarations]
  
  m3u8-segmenter.c:392:5: error: ‘dump_format’ is deprecated (declared at /usr/local/include/libavformat/avformat.h:1559) [-Werror=deprecated-declarations]
  
  m3u8-segmenter.c:406:5: error: ‘url_fopen’ is deprecated (declared at /usr/local/include/libavformat/avio.h:279) [-Werror=deprecated-declarations]
  
  m3u8-segmenter.c:411:5: error: ‘av_write_header’ is deprecated (declared at /usr/local/include/libavformat/avformat.h:1492) [-Werror=deprecated-declarations]
  
  m3u8-segmenter.c:444:67: error: ‘PKT_FLAG_KEY’ undeclared (first use in this function)
  
  m3u8-segmenter.c:455:13: error: ‘put_flush_packet’ is deprecated (declared at /usr/local/include/libavformat/avio.h:293) [-Werror=deprecated-declarations]
  
  m3u8-segmenter.c:456:13: error: ‘url_fclose’ is deprecated (declared at /usr/local/include/libavformat/avio.h:280) [-Werror=deprecated-declarations]
  
  m3u8-segmenter.c:476:13: error: ‘url_fopen’ is deprecated (declared at /usr/local/include/libavformat/avio.h:279) [-Werror=deprecated-declarations]
  
  m3u8-segmenter.c:482:13: error: ‘av_write_header’ is deprecated (declared at /usr/local/include/libavformat/avformat.h:1492) [-Werror=deprecated-declarations]
  
  m3u8-segmenter.c:514:5: error: ‘url_fclose’ is deprecated (declared at /usr/local/include/libavformat/avio.h:280) [-Werror=deprecated-declarations]
  
  cc1: all warnings being treated as errors
  
  
  
  make: *** [all] Error 1

• Build FFMPEG with x264 for Android

  12 novembre 2016, par Kage

  I am trying to build FFMPEG with libx264 for Android.

  I can successfully build and use FFMPEG for Android but I realized that I need the ability to encode, therefore I am trying to build FFMPEG with x264.

  I am using this tutorial to build FFmpeg for Android http://www.roman10.net/how-to-build-ffmpeg-for-android/

  When trying to build FFMPEG I get an error :

  "ERROR : libx264 not found"

  And in my log it says :

  "/usr/local/lib/libx264.a : could not read symbols : Archive has no
  index ; run ranlib to add one..."

  I have the latest versions of both FFMPEG and x264.
  I understand that FFMPEG looks for the header and libraries in usr/lib and usr/include, so in order to make it find x264 I use the cflags and ldflags :

  • —extra-cflags = " -I/usr/local/include "
  • —extra-ldflags = " -L/usr/local/lib "

  I have tried building x264 with many different options that other people on the internet have said that i need. eg. —enable-shared, —enable-static, —disable-pthreads etc.
  Some forums say enable this, others say no disable that.

  Any help would be much appreciated,
  Thanks

  EDIT :

  If I build FFmpeg with the simplest commands to include libx264 then it works.
  ie.

  ./configure --enable-gpl --enable-libx264 --extra-cflags="-I/usr/local/include" --extra-ldflags="-L/usr/local/lib" --enable-static --enable-shared

  However I need it to work for Android. The script I am using is :

  NDK=~/Desktop/android-ndk-r7
  
  PLATFORM=$NDK/platforms/android-8/arch-arm/
  
  PREBUILT=$NDK/toolchains/arm-linux-androideabi-4.4.3/prebuilt/darwin-x86
  
  function build_one
  
  {
  
  ./configure --target-os=linux \
  
      --prefix=$PREFIX \
  
      --enable-cross-compile \
  
      --enable-shared \
  
      --enable-static \
  
      --extra-libs="-lgcc" \
  
      --arch=arm \
  
      --cc=$PREBUILT/bin/arm-linux-androideabi-gcc \
  
      --cross-prefix=$PREBUILT/bin/arm-linux-androideabi- \
  
      --nm=$PREBUILT/bin/arm-linux-androideabi-nm \
  
      --sysroot=$PLATFORM \
  
      --extra-cflags=" -O3 -fpic -DANDROID -DHAVE_SYS_UIO_H=1 -Dipv6mr_interface=ipv6mr_ifindex -fasm -Wno-psabi -fno-short-enums -fno-strict-aliasing -finline-limit=300 $OPTIMIZE_CFLAGS -I/usr/local/include" \
  
      --extra-ldflags="-Wl,-rpath-link=$PLATFORM/usr/lib -L $PLATFORM/usr/lib -nostdlib -lc -lm -ldl -llog -L/usr/local/lib " \
  
      --enable-gpl \
  
      --enable-libx264 \
  
      --disable-everything \
  
      --enable-demuxer=mov \
  
      --enable-demuxer=h264 \
  
      --disable-ffplay \
  
      --enable-protocol=file \
  
      --enable-avformat \
  
      --enable-avcodec \
  
      --enable-decoder=rawvideo \
  
      --enable-decoder=mjpeg \
  
      --enable-decoder=h263 \
  
      --enable-decoder=mpeg4 \
  
      --enable-decoder=h264 \
  
      --enable-encoder=mjpeg \
  
      --enable-encoder=h263 \
  
      --enable-encoder=mpeg4 \
  
      --enable-encoder=h264 \
  
      --enable-parser=h264 \
  
      --disable-network \
  
      --enable-zlib \
  
      --disable-avfilter \
  
      --disable-avdevice \
  
      $ADDITIONAL_CONFIGURE_FLAG
  
  
  
  make clean
  
  make  -j4 install
  
  $PREBUILT/bin/arm-linux-androideabi-ar d libavcodec/libavcodec.a inverse.o
  
  $PREBUILT/bin/arm-linux-androideabi-ld -rpath-link=$PLATFORM/usr/lib -L$PLATFORM/usr/lib  -soname libffmpeg.so -shared -nostdlib  -z,noexecstack -Bsymbolic --whole-archive --no-undefined -o $PREFIX/libffmpeg.so libavcodec/libavcodec.a libavformat/libavformat.a libavutil/libavutil.a libswscale/libswscale.a -lc -lm -lz -ldl -llog  --warn-once  --dynamic-linker=/system/bin/linker $PREBUILT/lib/gcc/arm-linux-androideabi/4.4.3/libgcc.a
  
  }
  
  
  
  CPU=armv7-a
  
  OPTIMIZE_CFLAGS="-mfloat-abi=softfp -mfpu=vfpv3-d16 -marm -march=$CPU "
  
  PREFIX=./android/$CPU
  
  ADDITIONAL_CONFIGURE_FLAG=
  
  build_one

  I am guessing that some option in my configure command is conflicting with enabling libx264

  NOTE : If I remove —enable-libx264 then it works