Recherche avancée

Sur d’autres sites (7665)

• Lawful basis for processing personal data under GDPR with Matomo

  30 avril 2018, par InnoCraft

  Disclaimer : this blog post has been written by digital analysts, not lawyers. The purpose of this article is to explain what is a lawful basis and which one you can use with Matomo in order to be GDPR compliant. This work comes from our interpretation of the following web page from the UK privacy commission : ICO. It cannot be considered as professional legal advice. So as GDPR, this information is subject to change. GDPR may be also known as DSGVO in German, BDAR in Lithuanian, RGPD in Spanish, French, Italian, Portuguese. This blog post contains public sector information licensed under the Open Government Licence v3.0.

  The golden rule under GDPR is that you need to have a lawful basis in order to process personal data. Note that it is possible to not process personal data with Matomo. When you do not collect any personal data, then you do not need to determine a lawful basis and this article wouldn’t apply to you.

  “If no lawful basis applies to your processing, your processing will be unlawful and in breach of the first principle.“

  Source : ICO, based on article 6 of GDPR.

  As you may process personal data in Matomo, you have to :

  1. define a lawful basis.
  2. document your choice.
  3. inform your visitor about it in a privacy notice.

  Even if you think you don’t process personal data, we recommend reading this post about personal data in Matomo (personal data may be hidden in many ways).

  Note that if you are processing special category data (ethnic origin, politics, religion, trade union membership…) or criminal offence data ; extra responsibilities are applied, and we will not detail them in this blog post.

  1 – Define a lawful basis

  There are 6 different lawful bases all defined within article 6 of the GDPR official text :

  1. Consent : the data subject has given consent to the processing of his or her personal data for one or more specific purposes.
  2. Contract : processing is necessary for the performance of a contract to which the data subject is party or in order to take steps at the request of the data subject prior to entering into a contract.
  3. Legal obligation : processing is necessary for compliance with a legal obligation to which the controller is subject.
  4. Vital interests : processing is necessary in order to protect the vital interests of the data subject or of another natural person.
  5. Public task : processing is necessary for the performance of a task carried out in the public interest or in the exercise of an official authority vested in the controller.
  6. Legitimate interests : processing is necessary for the purposes of the legitimate interests pursued by the controller or by a third party ; except where such interests are overridden by the interests or fundamental rights and freedoms of the data subject which require protection of personal data, in particular where the data subject is a child.

  As you can see, most of them are not applicable to Matomo. As ICO is mentioning it within their documentation :

  “In many cases you are likely to have a choice between using legitimate interests or consent.”

  “Consent” or “Legitimate interests” : which lawful basis is the best when using Matomo ?

  Well, there is no right or wrong answer here.

  In order to make this choice, ICO listed on their website different questions you should keep in mind :

  • Who does the processing benefit ?
  • Would individuals expect this processing to take place ?
  • What is your relationship with the individual ?
  • Are you in a position of power over them ?
  • What is the impact of the processing on the individual ?
  • Are they vulnerable ?
  • Are some of the individuals concerns likely to object ?
  • Are you able to stop the processing at any time on request ?

  From our perspective, “Legitimate interests” should be used in most of the cases as :

  • The processing benefits to the owner of the website and not to a third party company.
  • A user expects to have their data kept by the website itself.
  • Matomo provides many features in order to show how personal data is processed and how users can exercise their rights.
  • As the data is not used for profiling, the impact of processing personal data is very low.

  But once more, it really depends ; if you are processing personal data which may represent a risk to the final user, then getting consent is for us the right lawful basis.

  If you are not sure, at the time of writing ICO is providing a tool in order to help you make this decision :

  

  Note that once you choose a lawful basis, it is highly recommended not to switch to another unless you have a good reason.

  What are the rights that a data subject can exercise ?

  According to the lawful basis you choose for processing personal data with Matomo, your users will be able to exercise different rights :

  	Right to be informed	Right of access	Right to erasure	Right to portability	Right to object	Right to withdraw consent
  Legitimate interests	X	X	X		X
  Consent	X	X	X	X		X

   

  • Right to be informed : whatever the lawful basis you choose, you need to inform your visitor about it within your privacy notice.
  • Right of access : as described in article 15 of GDPR. Your visitor has the right to access the personal data you are processing about them. You can exercise their right directly within the page “GDPR Tools” in your Matomo.
  • Right to erasure : it means that a visitor will be able to ask you to erase all their data. You can exercise the right to erasure directly within the page “GDPR Tools” in your Matomo.
  • Right to portability : it means that you need to export the data which concern the individual in a machine-readable format and provide them with their personal data. You can exercise their right directly within the page “GDPR Tools” in your Matomo.
  • Right to object : it means that your visitor has the right to say no to the processing of their personal data. In order to exercise this right, you need to implement the opt-out feature on your website.
  • Right to withdraw consent : it means that your visitor can remove their consent at any time. We developed a feature in order to do just that. You can learn more by opening the page “Privacy > Asking for consent” in your Matomo.

  2 – Document your choice

  Once you choose “Legitimate interests” or “Consent” lawful basis, you will have some obligations to fulfill. From our interpretation, “Legitimate interests” means writing more documentation, “Consent” means a more technical approach.

  What should I do if I am processing personal data with Matomo based on “Legitimate interests ?

  ICO is providing a checklist for “Legitimate interests”, below is our interpretation :

  • Check that legitimate interests is the most appropriate lawful basis.

  Our interpretation : document and justify why you choose this lawful basis in particular. This tool from ICO can help you.

  • Understand your responsibility to protect the individual’s interests.

  Our interpretation : you need to take all the measures in order to protect your users privacy and data security. Please refer to our guide in order to secure your Matomo installation.

  • Conduct a legitimate interests assessment (LIA) and keep a record of it to ensure that you can justify your decision. This document is composed of a set of questions on those 3 key concerns : 1) purpose, 2) necessity, 3) balancing.

  1) Purpose :

  • Why do you want to process the data – what are you trying to achieve ?
  • Who benefits from the processing ? In what way ?
  • Are there any wider public benefits to the processing ?
  • How important are those benefits ?
  • What would the impact be if you couldn’t go ahead ?
  • Would your use of the data be unethical or unlawful in any way ?

  2) Necessity :

  • Does this processing actually help to further that interest ?
  • Is it a reasonable way to go about it ?
  • Is there another less intrusive way to achieve the same result ?

  3) Balancing :

  • What is the nature of your relationship with the individual ?
  • Is any of the data particularly sensitive or private ?
  • Would people expect you to use their data in this way ?
  • Are you happy to explain it to them ?
  • Are some people likely to object or find it intrusive ?
  • What is the possible impact on the individual ?
  • How big an impact might it have on them ?
  • Are you processing children’s data ?
  • Are any of the individuals vulnerable in any other way ?
  • Can you adopt any safeguards to minimise the impact ?
  • Can you offer an opt-out ?

  • Identify the relevant legitimate interests.
  • Check that the processing is necessary and there is no less intrusive way to achieve the same result.
  • Perform a balancing test, and be confident that the individual’s interests do not override those legitimate interests.
  • Use individuals’ data in ways they would reasonably expect, unless you have a very good reason.

  Our interpretation : use those data to improve user experience for example.

  • Do not use people’s data in ways they would find intrusive or which could cause them harm, unless you have a very good reason.

  Our interpretation : ask yourself if this data is representing a risk for the individuals.

  • If you process children’s data, take extra care to make sure you protect their interests.
  • Consider safeguards to reduce the impact where possible.

  Our interpretation : Check if your web hosting provider is providing appropriate safeguards.

  • Consider whether you can offer an opt out.

  Our interpretation : Matomo is providing you the opt-out feature.

  • If your LIA identifies a significant privacy impact, consider whether you also need to conduct a DPIA.

  Our interpretation : A DPIA can easily be conducted by using this software from the French privacy commission.

  • Regularly review your LIA and update it when circumstances change.
  • Include information about your legitimate interests in your privacy information.

  As you see, going for “Legitimate interests” requires a lot of written documentation. Let’s see how “Consent” differ.

  What should I do if I am processing personal data with Matomo based on “Consent” ?

  As previously mentioned, using “Consent” rather than “Legitimate interests” is more technical but less intense in terms of documentation. Like for “Legitimate interests”, ICO is providing a checklist for “Consent” which is divided into 3 key categories : 1) asking for consent, 2) recording consent, and 3) managing consent.

  1. Asking for consent :
     1. Check that consent is the most appropriate lawful basis for processing.
     2. Make the request for consent prominent and separate from your terms and conditions.
     3. Ask people to positively opt in. Don’t use pre-ticked boxes or any other type of default consent.
     4. Use clear, plain language that is easy to understand.
     5. Specify why you want the data and what you are going to do with it.
     6. Give individual (‘granular’) options to consent separately to different purposes and types of processing.
     7. Name your organisation and any third party controllers who will be relying on the consent.
     8. Tell individuals they can withdraw their consent.
     9. Ensure that individuals can refuse to consent without detriment.
     10. Avoid making consent a precondition of a service.
     11. If you offer online services directly to children, only seek consent if you have age-verification measures (and parental-consent measures for younger children) in place.
  2. Recording consent :
     1. Keep a record of when and how you got consent from the individual.
     2. Keep a record of exactly what you told them at the time.
  3. Managing consent :
     1. Regularly review consents to check that the relationship, the processing and the purposes have not changed.
     2. Have processes in place to refresh consent at appropriate intervals, including any parental consent.
     3. Consider using privacy dashboards or other preference-management tools as a matter of good practice.
     4. Make it easy for individuals to withdraw their consent at any time, and publicise how to do so.
     5. Act on withdrawals of consent as soon as you can.
     6. Don’t penalise individuals who wish to withdraw consent.

     3 – Inform your visitor about it in a privacy notice

     Privacy notices are an important part within the GDPR process. Read our blog post dedicated to privacy notices to learn more.

     We really hope you enjoyed reading this blog post. Please have a look at our Matomo GDPR guide for more information.

  The post Lawful basis for processing personal data under GDPR with Matomo appeared first on Analytics Platform - Matomo.

• ffmpeg Transcoding Stops After Few Seconds [migrated]

  15 avril 2018, par Salem F

  I’m trying to do this over week now with no success,
  What’s I’m trying to do is transcoding video from live streaming source and downscale it with FFmpeg, but every time I start transcoding it broadcasting for 11 sec and stop.

  The last command I tried :

  ffmpeg  -re  -i 'http://source.com/1034.ts' -preset ultrafast http://localhost:2052/feed1.ffm

  I tried to download the .ts file with IDM and it finish downloading the file on the exact 12 Sec that FFmpeg stop trans coding on it.

  Does that means that FFmpeg download that file as one segment and not continued reading the source video As what video players does usually. By the way, I tried with source with VLC player and it didn’t stop playing the the same source video.

  I decided to pass FFmpeg command via FFserver config file ffserver.conf

  Launch ffmpeg -i 'http://source.com/1.ts' -copyinkf -codec copy   

  The stream works fine for a while but after testing couple sources I notice it’s struggle to trans-coding HD videos.

  I guess the issue with my VPS KVM server being very limited CPU and RAM ( 128MB only) ! Since I tried using ultrafast preset but din’t solve the issue, another thing, I notice when I enable AVOptionVideo crf setting on ffserver.conf trans-coding runs bit smoothly without frame-rate dropping.
  Las my server uses Xeon L5520 CPU which is outdated CPU specially I gout 1/4 power of V single core (if they count HT it will be 1/8 of the real core) : (

  # vlc -I dummy 'https://source.com/1034.ts' --sout '#standard{access=http,mux=flv,dst=localhost:2052}'
  
  VLC media player 2.2.8 Weatherwax (revision 2.2.7-14-g3cc1d8cba9)
  
  [09d3fdf0] pulse audio output error: PulseAudio server connection failure: Connection refused
  
  [09d279c0] core interface error: no suitable interface module
  
  [09c9b8f8] core libvlc error: interface "globalhotkeys,none" initialization failed
  
  [09d279c0] dbus interface error: Failed to connect to the D-Bus session daemon: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
  
  [09d279c0] core interface error: no suitable interface module
  
  [09c9b8f8] core libvlc error: interface "dbus,none" initialization failed
  
  [09d279c0] dummy interface: using the dummy interface module...
  
  [b5e04ae0] access_output_http access out: Consider passing --http-host=IP on the command line instead.
  
  [b5e38ab8] ts demux: MPEG-4 descriptor not found for pid 0x101 type 0xf
  
  [b5e90ae0] packetizer_mpeg4audio decoder: AAC channels: 2 samplerate: 48000
  
  [flv @ 0xb5e33b40] dimensions not set
  
  [b5e06360] avformat mux error: could not write header: Invalid argument
  
  [b5e88ef0] core decoder error: cannot continue streaming due to errors
  
  [b5e90ae0] core decoder error: cannot continue streaming due to errors

  Here output with -loglevel verbose

  :~# ffmpeg -i http://source.com/1.ts -copyinkf -codec copy  -loglevel verbose  http://127.0.0.1:8090/feed1.ffm
  
  ffmpeg version 2.6.9 Copyright (c) 2000-2016 the FFmpeg developers
  
    built with gcc 4.9.2 (Debian 4.9.2-10)
  
    configuration: --prefix=/usr --extra-cflags='-g -O2 -fstack-protector-strong -Wformat -Werror=format-security ' --extra-ldflags='-Wl,-z,relro' --cc='ccache cc' --enable-shared --enable-libmp3lame --enable-gpl --enable-nonfree --enable-libvorbis --enable-pthreads --enable-libfaac --enable-libxvid --enable-postproc --enable-x11grab --enable-libgsm --enable-libtheora --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libx264 --enable-libspeex --enable-nonfree --disable-stripping --enable-libvpx --enable-libschroedinger --disable-encoder=libschroedinger --enable-version3 --enable-libopenjpeg --enable-librtmp --enable-avfilter --enable-libfreetype --enable-libvo-aacenc --disable-decoder=amrnb --enable-libvo-amrwbenc --enable-libaacplus --libdir=/usr/lib/i386-linux-gnu --disable-vda --enable-libbluray --enable-libcdio --enable-gnutls --enable-frei0r --enable-openssl --enable-libass --enable-libopus --enable-fontconfig --enable-libpulse --disable-mips32r2 --disable-mipsdspr1 --disable-mipsdspr2 --enable-libvidstab --enable-libzvbi --enable-avresample --disable-htmlpages --disable-podpages --enable-libutvideo --enable-libfdk-aac --enable-libx265 --enable-libiec61883 --enable-vaapi --enable-libdc1394 --disable-altivec --shlibdir=/usr/lib/i386-linux-gnu
  
    libavutil      54. 20.100 / 54. 20.100
  
    libavcodec     56. 26.100 / 56. 26.100
  
    libavformat    56. 25.101 / 56. 25.101
  
    libavdevice    56.  4.100 / 56.  4.100
  
    libavfilter     5. 11.102 /  5. 11.102
  
    libavresample   2.  1.  0 /  2.  1.  0
  
    libswscale      3.  1.101 /  3.  1.101
  
    libswresample   1.  1.100 /  1.  1.100
  
    libpostproc    53.  3.100 / 53.  3.100
  
  Invalid UE golomb code
  
      Last message repeated 2 times
  
  Input #0, mpegts, from 'http://source.com/1.ts':
  
    Duration: N/A, start: 30472.768167, bitrate: N/A
  
    Program 1
  
      Metadata:
  
        service_name    : Service01
  
        service_provider: FFmpeg
  
      Stream #0:0[0x100]: Video: h264 (High) ([27][0][0][0] / 0x001B), yuv420p, 960x540 (960x544) [SAR 1:1 DAR 16:9], 50 fps, 50 tbr, 90k tbn, 100 tbc
  
      Stream #0:1[0x101]: Audio: aac (LC) ([15][0][0][0] / 0x000F), 48000 Hz, stereo, fltp, 105 kb/s
  
  [graph 0 input from stream 0:1 @ 0x971f2c0] tb:1/48000 samplefmt:fltp samplerate:48000 chlayout:0x3
  
  [audio format for output stream 0:0 @ 0x9844de0] auto-inserting filter 'auto-inserted resampler 0' between the filter 'Parsed_anull_0' and the filter 'audio format for output stream 0:0'
  
  [auto-inserted resampler 0 @ 0x97115e0] ch:2 chl:stereo fmt:fltp r:48000Hz -> ch:1 chl:mono fmt:fltp r:22050Hz
  
  [graph 1 input from stream 0:0 @ 0x96f5d00] w:960 h:540 pixfmt:yuv420p tb:1/90000 fr:50/1 sar:1/1 sws_param:flags=2
  
  [scaler for output stream 0:1 @ 0x96f5e80] w:352 h:240 flags:'0x4' interl:0
  
  [scaler for output stream 0:1 @ 0x96f5e80] w:960 h:540 fmt:yuv420p sar:1/1 -> w:352 h:240 fmt:yuv420p sar:40/33 flags:0x4
  
  Output #0, ffm, to 'http://127.0.0.1:8090/feed1.ffm':
  
    Metadata:
  
      creation_time   : now
  
      encoder         : Lavf56.25.101
  
      Stream #0:0: Audio: wmav2, 22050 Hz, mono, fltp, 64 kb/s
  
      Metadata:
  
        encoder         : Lavc56.26.100 wmav2
  
      Stream #0:1: Video: msmpeg4v3 (msmpeg4), yuv420p, 352x240 [SAR 40:33 DAR 16:9], q=2-31, 256 kb/s, 50 fps, 1000k tbn, 15 tbc
  
      Metadata:
  
        encoder         : Lavc56.26.100 msmpeg4
  
  Stream mapping:
  
    Stream #0:1 -> #0:0 (aac (native) -> wmav2 (native))
  
    Stream #0:0 -> #0:1 (h264 (native) -> msmpeg4v3 (msmpeg4))
  
  Press [q] to stop, [?] for help
  
  Invalid UE golomb code
  
  *** dropping frame 3 from stream 1 at ts 1
  
      Last message repeated 1 times
  
  [msmpeg4 @ 0x970f060] warning, clipping 1 dct coefficients to -127..127
  
  *** dropping frame 4 from stream 1 at ts 2
  
      Last message repeated 1 times
  
  *** dropping frame 5 from stream 1 at ts 3
  
      Last message repeated 1 times
  
  *** dropping frame 5 from stream 1 at ts 4
  
  *** dropping frame 6 from stream 1 at ts 4
  
      Last message repeated 1 times
  
  *** dropping frame 7 from stream 1 at ts 5
  
      Last message repeated 1 times
  
  [msmpeg4 @ 0x970f060] warning, clipping 1 dct coefficients to -127..127
  
  *** dropping frame 8 from stream 1 at ts 6
  
      Last message repeated 1 times
  
  *** dropping frame 8 from stream 1 at ts 7
  
  *** dropping frame 9 from stream 1 at ts 7
  
      Last message repeated 1 times
  
  *** dropping frame 10 from stream 1 at ts 8
  
      Last message repeated 1 times
  
  *** dropping frame 11 from stream 1 at ts 9
  
      Last message repeated 1 times
  
  *** dropping frame 11 from stream 1 at ts 10
  
  *** dropping frame 12 from stream 1 at ts 10
  
      Last message repeated 1 times
  
  *** dropping frame 13 from stream 1 at ts 11
  
      Last message repeated 1 times
  
  *** dropping frame 14 from stream 1 at ts 12
  
      Last message repeated 1 times
  
  *** dropping frame 14 from stream 1 at ts 13
  
  *** dropping frame 15 from stream 1 at ts 13
  
      Last message repeated 1 times
  
  *** dropping frame 16 from stream 1 at ts 14
  
      Last message repeated 1 times
  
  *** dropping frame 17 from stream 1 at ts 15
  
      Last message repeated 1 times
  
  *** dropping frame 17 from stream 1 at ts 16
  
  *** dropping frame 18 from stream 1 at ts 16
  
      Last message repeated 1 times
  
  *** dropping frame 19 from stream 1 at ts 17
  
      Last message repeated 1 times
  
  *** dropping frame 20 from stream 1 at ts 18me=00:00:01.33 bitrate= 270.3kbits/s dup=0 drop=39
  
      Last message repeated 1 times
  
  *** dropping frame 20 from stream 1 at ts 19
  
  *** dropping frame 21 from stream 1 at ts 19
  
      Last message repeated 1 times
  
  *** dropping frame 22 from stream 1 at ts 20
  
      Last message repeated 1 times
  
  *** dropping frame 23 from stream 1 at ts 21
  
      Last message repeated 1 times
  
  *** dropping frame 23 from stream 1 at ts 22
  
  *** dropping frame 24 from stream 1 at ts 22
  
      Last message repeated 1 times
  
  *** dropping frame 25 from stream 1 at ts 23
  
      Last message repeated 1 times
  
  *** dropping frame 26 from stream 1 at ts 24
  
      Last message repeated 1 times
  
  *** dropping frame 26 from stream 1 at ts 25
  
  *** dropping frame 27 from stream 1 at ts 25
  
      Last message repeated 1 times
  
  *** dropping frame 28 from stream 1 at ts 26
  
      Last message repeated 1 times
  
  *** dropping frame 29 from stream 1 at ts 27
  
      Last message repeated 1 times
  
  *** dropping frame 29 from stream 1 at ts 28
  
  *** dropping frame 30 from stream 1 at ts 28
  
      Last message repeated 1 times
  
  *** dropping frame 31 from stream 1 at ts 29
  
      Last message repeated 1 times
  
  *** dropping frame 32 from stream 1 at ts 30
  
      Last message repeated 1 times
  
  *** dropping frame 32 from stream 1 at ts 31
  
  *** dropping frame 33 from stream 1 at ts 31
  
      Last message repeated 1 times
  
  *** dropping frame 34 from stream 1 at ts 32
  
      Last message repeated 1 times
  
  *** dropping frame 34 from stream 1 at ts 33
  
  *** dropping frame 35 from stream 1 at ts 33
  
  *** dropping frame 35 from stream 1 at ts 34
  
  *** dropping frame 36 from stream 1 at ts 34
  
      Last message repeated 1 times
  
  *** dropping frame 37 from stream 1 at ts 35
  
      Last message repeated 1 times
  
  Invalid UE golomb code
  
  *** dropping frame 38 from stream 1 at ts 36
  
      Last message repeated 1 times
  
  *** dropping frame 38 from stream 1 at ts 37
  
  *** dropping frame 39 from stream 1 at ts 37
  
      Last message repeated 1 times
  
  *** dropping frame 40 from stream 1 at ts 38
  
      Last message repeated 1 times
  
  *** dropping frame 41 from stream 1 at ts 39me=00:00:02.73 bitrate= 311.7kbits/s dup=0 drop=88
  
      Last message repeated 1 times
  
  *** dropping frame 41 from stream 1 at ts 40
  
  *** dropping frame 42 from stream 1 at ts 40
  
      Last message repeated 1 times
  
  *** dropping frame 43 from stream 1 at ts 41
  
      Last message repeated 1 times
  
  *** dropping frame 44 from stream 1 at ts 42
  
      Last message repeated 1 times
  
  *** dropping frame 44 from stream 1 at ts 43
  
  *** dropping frame 45 from stream 1 at ts 43
  
      Last message repeated 1 times
  
  *** dropping frame 46 from stream 1 at ts 44
  
      Last message repeated 1 times
  
  *** dropping frame 47 from stream 1 at ts 45
  
      Last message repeated 1 times
  
  *** dropping frame 47 from stream 1 at ts 46
  
  *** dropping frame 48 from stream 1 at ts 46
  
      Last message repeated 1 times
  
  *** dropping frame 49 from stream 1 at ts 47
  
      Last message repeated 1 times
  
  *** dropping frame 50 from stream 1 at ts 48
  
      Last message repeated 1 times
  
  *** dropping frame 50 from stream 1 at ts 49
  
  *** dropping frame 51 from stream 1 at ts 49
  
      Last message repeated 1 times
  
  *** dropping frame 52 from stream 1 at ts 50
  
      Last message repeated 1 times
  
  *** dropping frame 53 from stream 1 at ts 51
  
      Last message repeated 1 times
  
  [h264 @ 0x9844a00] error while decoding MB 58 12, bytestream -5
  
  [h264 @ 0x9844a00] concealing 1311 DC, 1311 AC, 1311 MV errors in B frame
  
  *** dropping frame 53 from stream 1 at ts 52
  
  No more output streams to write to, finishing.
  
  frame=   55 fps= 42 q=4.3 Lsize=     152kB time=00:00:03.66 bitrate= 339.6kbits/s dup=0 drop=119
  
  video:116kB audio:26kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 6.760316%
  
  Input file #0 (http://source.com/1.ts):
  
    Input stream #0:0 (video): 174 packets read (220322 bytes); 174 frames decoded;
  
    Input stream #0:1 (audio): 156 packets read (36657 bytes); 156 frames decoded (159744 samples);
  
    Total: 330 packets (256979 bytes) demuxed
  
  Output file #0 (http://127.0.0.1:8090/feed1.ffm):
  
    Output stream #0:0 (audio): 72 frames encoded (73383 samples); 72 packets muxed (26712 bytes);
  
    Output stream #0:1 (video): 55 frames encoded; 55 packets muxed (119080 bytes);
  
    Total: 127 packets (145792 bytes) muxed

  Here input URL file info After I download it to my PC with IDM

  General
  
  ID                             : 1 (0x1)
  
  Complete name                  : D:\1.ts
  
  Format                         : MPEG-TS
  
  File size                      : 256 KiB
  
  Duration                       : 2 s 520 ms
  
  Overall bit rate mode          : Variable
  
  Overall bit rate               : 788 kb/s
  
  
  
  Video
  
  ID                             : 256 (0x100)
  
  Menu ID                        : 1 (0x1)
  
  Format                         : AVC
  
  Format/Info                    : Advanced Video Codec
  
  Format profile                 : High@L3.1
  
  Format settings, CABAC         : Yes
  
  Format settings, RefFrames     : 2 frames
  
  Codec ID                       : 27
  
  Duration                       : 2 s 680 ms
  
  Width                          : 960 pixels
  
  Height                         : 540 pixels
  
  Display aspect ratio           : 16:9
  
  Frame rate                     : 50.000 FPS
  
  Color space                    : YUV
  
  Chroma subsampling             : 4:2:0
  
  Bit depth                      : 8 bits
  
  Scan type                      : Progressive
  
  
  
  Audio
  
  ID                             : 257 (0x101)
  
  Menu ID                        : 1 (0x1)
  
  Format                         : AAC
  
  Format/Info                    : Advanced Audio Codec
  
  Format version                 : Version 4
  
  Format profile                 : LC
  
  Muxing mode                    : ADTS
  
  Codec ID                       : 15
  
  Duration                       : 2 s 69 ms
  
  Bit rate mode                  : Variable
  
  Channel(s)                     : 2 channels
  
  Channel positions              : Front: L R
  
  Sampling rate                  : 48.0 kHz
  
  Frame rate                     : 46.875 FPS (1024 SPF)
  
  Compression mode               : Lossy
  
  Delay relative to video        : -12 ms
  
  
  
  Menu
  
  ID                             : 4096 (0x1000)
  
  Menu ID                        : 1 (0x1)
  
  Duration                       : 2 s 520 ms
  
  List                           : 256 (0x100) (AVC) / 257 (0x101) (AAC)
  
  Service name                   : Service01
  
  Service provider               : FFmpeg
  
  Service type                   : digital television

• Anomalie #4124 : changer de fournisseur de vignette ou les supprimer

  6 avril 2018, par RastaPopoulos ♥

  Dans tous les cas ce service, à moins de monter à part un serveur exprès avec un logiciel libre qui ferait ça, c’est forcément avec un service externe. Mais le plugin propose plusieurs fournisseur et peut évoluer et être mis à jour plus vite quand il y a des changements.

  Par contre si on l’enlève du noyau enfin plugins-dist, il faut que le plugin Thumb remette bien les vignettes au même endroit dans les stats aussi (je ne sais plus ce qu’il fait, s’il fournit juste des API ou quoi).

  Et donc oui aussi pour l’enlever de plugins-dist.