Sur d’autres sites (5038)

• Quicktime Eats Cookies

  20 septembre 2009

  It appears that when embedding Quicktime in a webpage, being viewed by Safari 4 in Snow Leopard, Quicktime no longer passes cookies to the server. So, if you’re having the Quicktime plugin load a file that uses cookie data to verify permissions, you’ll need to move to a query string model.

  This only happens when Safari is running in 64bit mode, so I imagine it has to do with the "plugins running as separate entities" crash protection that Snow Leopard adds.

  This does not appear to impact the Flash plugin.

• Beware the builtins

  14 janvier 2010, par Mans — Compilers

  GCC includes a large number of builtin functions allegedly providing optimised code for common operations not easily expressed directly in C. Rather than taking such claims at face value (this is GCC after all), I decided to conduct a small investigation to see how well a few of these functions are actually implemented for various targets.

  For my test, I selected the following functions :

  • __builtin_bswap32 : Byte-swap a 32-bit word.
  • __builtin_bswap64 : Byte-swap a 64-bit word.
  • __builtin_clz : Count leading zeros in a word.
  • __builtin_ctz : Count trailing zeros in a word.
  • __builtin_prefetch : Prefetch data into cache.

  To test the quality of these builtins, I wrapped each in a normal function, then compiled the code for these targets :

  • ARMv7
  • AVR32
  • MIPS
  • MIPS64
  • PowerPC
  • PowerPC64
  • x86
  • x86_64

  In all cases I used compiler flags were -O3 -fomit-frame-pointer plus any flags required to select a modern CPU model.
  

  ARM

  Both __builtin_clz and __builtin_prefetch generate the expected CLZ and PLD instructions respectively. The code for __builtin_ctz is reasonable for ARMv6 and earlier :

  rsb     r3, r0, #0
  and     r0, r3, r0
  clz     r0, r0
  rsb     r0, r0, #31
  

  For ARMv7 (in fact v6T2), however, using the new bit-reversal instruction would have been better :

  rbit    r0, r0
  clz     r0, r0
  

  I suspect this is simply a matter of the function not yet having been updated for ARMv7, which is perhaps even excusable given the relatively rare use cases for it.

  The byte-reversal functions are where it gets shocking. Rather than use the REV instruction found from ARMv6 on, both of them generate external calls to __bswapsi2 and __bswapdi2 in libgcc, which is plain C code :

  SItype
  __bswapsi2 (SItype u)
  
    return ((((u) & 0xff000000) >> 24)
            | (((u) & 0x00ff0000) >>  8)
            | (((u) & 0x0000ff00) <<  8)
            | (((u) & 0x000000ff) << 24)) ;
  
  DItype
  
  __bswapdi2 (DItype u)
  
  
  
     return ((((u) & 0xff00000000000000ull) >> 56)
  
            | (((u) & 0x00ff000000000000ull) >> 40)
  
            | (((u) & 0x0000ff0000000000ull) >> 24)
  
            | (((u) & 0x000000ff00000000ull) >>  8)
  
            | (((u) & 0x00000000ff000000ull) <<  8)
  
            | (((u) & 0x0000000000ff0000ull) << 24)
  
            | (((u) & 0x000000000000ff00ull) << 40)
  
            | (((u) & 0x00000000000000ffull) << 56)) ;
  
  
  

  While the 32-bit version compiles to a reasonable-looking shift/mask/or job, the 64-bit one is a real WTF. Brace yourselves :

  push    r4, r5, r6, r7, r8, r9, sl, fp
  mov     r5, #0
  mov     r6, #65280 ; 0xff00
  sub     sp, sp, #40 ; 0x28
  and     r7, r0, r5
  and     r8, r1, r6
  str     r7, [sp, #8]
  str     r8, [sp, #12]
  mov     r9, #0
  mov     r4, r1
  and     r5, r0, r9
  mov     sl, #255 ; 0xff
  ldr     r9, [sp, #8]
  and     r6, r4, sl
  mov     ip, #16711680 ; 0xff0000
  str     r5, [sp, #16]
  str     r6, [sp, #20]
  lsl     r2, r0, #24
  and     ip, ip, r1
  lsr     r7, r4, #24
  mov     r1, #0
  lsr     r5, r9, #24
  mov     sl, #0
  mov     r9, #-16777216 ; 0xff000000
  and     fp, r0, r9
  lsr     r6, ip, #8
  orr     r9, r7, r1
  and     ip, r4, sl
  orr     sl, r1, r2
  str     r6, [sp]
  str     r9, [sp, #32]
  str     sl, [sp, #36] ; 0x24
  add     r8, sp, #32
  ldm     r8, r7, r8
  str     r1, [sp, #4]
  ldm     sp, r9, sl
  orr     r7, r7, r9
  orr     r8, r8, sl
  str     r7, [sp, #32]
  str     r8, [sp, #36] ; 0x24
  mov     r3, r0
  mov     r7, #16711680 ; 0xff0000
  mov     r8, #0
  and     r9, r3, r7
  and     sl, r4, r8
  ldr     r0, [sp, #16]
  str     fp, [sp, #24]
  str     ip, [sp, #28]
  stm     sp, r9, sl
  ldr     r7, [sp, #20]
  ldr     sl, [sp, #12]
  ldr     fp, [sp, #12]
  ldr     r8, [sp, #28]
  lsr     r0, r0, #8
  orr     r7, r0, r7, lsl #24
  lsr     r6, sl, #24
  orr     r5, r5, fp, lsl #8
  lsl     sl, r8, #8
  mov     fp, r7
  add     r8, sp, #32
  ldm     r8, r7, r8
  orr     r6, r6, r8
  ldr     r8, [sp, #20]
  ldr     r0, [sp, #24]
  orr     r5, r5, r7
  lsr     r8, r8, #8
  orr     sl, sl, r0, lsr #24
  mov     ip, r8
  ldr     r0, [sp, #4]
  orr     fp, fp, r5
  ldr     r5, [sp, #24]
  orr     ip, ip, r6
  ldr     r6, [sp]
  lsl     r9, r5, #8
  lsl     r8, r0, #24
  orr     fp, fp, r9
  lsl     r3, r3, #8
  orr     r8, r8, r6, lsr #8
  orr     ip, ip, sl
  lsl     r7, r6, #24
  and     r5, r3, #16711680 ; 0xff0000
  orr     r7, r7, fp
  orr     r8, r8, ip
  orr     r4, r1, r7
  orr     r5, r5, r8
  mov     r9, r6
  mov     r1, r5
  mov     r0, r4
  add     sp, sp, #40 ; 0x28
  pop     r4, r5, r6, r7, r8, r9, sl, fp
  bx      lr
  

  That’s right, 91 instructions to move 8 bytes around a bit. GCC definitely has a problem with 64-bit numbers. It is perhaps worth noting that the bswap_64 macro in glibc splits the 64-bit value into 32-bit halves which are then reversed independently, thus side-stepping this weakness of gcc.

  As a side note, ARM RVCT (armcc) compiles those functions perfectly into one and two REV instructions, respectively.

  AVR32

  There is not much to report here. The latest gcc version available is 4.2.4, which doesn’t appear to have the bswap functions. The other three are handled nicely, even using a bit-reverse for __builtin_ctz.

  MIPS / MIPS64

  The situation MIPS is similar to ARM. Both bswap builtins result in external libgcc calls, the rest giving sensible code.

  PowerPC

  I scarcely believe my eyes, but this one is actually not bad. The PowerPC has no byte-reversal instructions, yet someone seems to have taken the time to teach gcc a good instruction sequence for this operation. The PowerPC does have some powerful rotate-and-mask instructions which come in handy here. First the 32-bit version :

  rotlwi  r0,r3,8
  rlwimi  r0,r3,24,0,7
  rlwimi  r0,r3,24,16,23
  mr      r3,r0
  blr
  

  The 64-bit byte-reversal simply applies the above code on each half of the value :

  rotlwi  r0,r3,8
  rlwimi  r0,r3,24,0,7
  rlwimi  r0,r3,24,16,23
  rotlwi  r3,r4,8
  rlwimi  r3,r4,24,0,7
  rlwimi  r3,r4,24,16,23
  mr      r4,r0
  blr
  

  Although I haven’t analysed that code carefully, it looks pretty good.

  PowerPC64

  Doing 64-bit operations is easier on a 64-bit CPU, right ? For you and me perhaps, but not for gcc. Here __builtin_bswap64 gives us the now familiar __bswapdi2 call, and while not as bad as the ARM version, it is not pretty :

  rldicr  r0,r3,8,55
  rldicr  r10,r3,56,7
  rldicr  r0,r0,56,15
  rldicl  r11,r3,8,56
  rldicr  r9,r3,16,47
  or      r11,r10,r11
  rldicr  r9,r9,48,23
  rldicl  r10,r0,24,40
  rldicr  r0,r3,24,39
  or      r11,r11,r10
  rldicl  r9,r9,40,24
  rldicr  r0,r0,40,31
  or      r9,r11,r9
  rlwinm  r10,r3,0,0,7
  rldicl  r0,r0,56,8
  or      r0,r9,r0
  rldicr  r10,r10,8,55
  rlwinm  r11,r3,0,8,15
  or      r0,r0,r10
  rldicr  r11,r11,24,39
  rlwinm  r3,r3,0,16,23
  or      r0,r0,r11
  rldicr  r3,r3,40,23
  or      r3,r0,r3
  blr
  

  That is 6 times longer than the (presumably) hand-written 32-bit version.

  x86 / x86_64

  As one might expect, results on x86 are good. All the tested functions use the available special instructions. One word of caution though : the bit-counting instructions are very slow on some implementations, specifically the Atom, AMD chips, and the notoriously slow Pentium4E.

  Conclusion

  In conclusion, I would say gcc builtins can be useful to avoid fragile inline assembler. Before using them, however, one should make sure they are not in fact harmful on the required targets. Not even those builtins mapping directly to CPU instructions can be trusted.

• Ogg objections

  3 mars 2010, par Mans — Multimedia

  The Ogg container format is being promoted by the Xiph Foundation for use with its Vorbis and Theora codecs. Unfortunately, a number of technical shortcomings in the format render it ill-suited to most, if not all, use cases. This article examines the most severe of these flaws.
  

  Overview of Ogg

  The basic unit in an Ogg stream is the page consisting of a header followed by one or more packets from a single elementary stream. A page can contain up to 255 packets, and a packet can span any number of pages. The following table describes the page header.

  Field	Size (bits)	Description
  capture_pattern	32	magic number “OggS”
  version	8	always zero
  flags	8
  granule_position	64	abstract timestamp
  bitstream_serial_number	32	elementary stream number
  page_sequence_number	32	incremented by 1 each page
  checksum	32	CRC of entire page
  page_segments	8	length of segment_table
  segment_table	variable	list of packet sizes

  Elementary stream types are identified by looking at the payload of the first few pages, which contain any setup data required by the decoders. For full details, see the official format specification.

  Generality

  Ogg, legend tells, was designed to be a general-purpose container format. To most multimedia developers, a general-purpose format is one in which encoded data of any type can be encapsulated with a minimum of effort.

  The Ogg format defined by the specification does not fit this description. For every format one wishes to use with Ogg, a complex mapping must first be defined. This mapping defines how to identify a codec, how to extract setup data, and even how timestamps are to be interpreted. All this is done differently for every codec. To correctly parse an Ogg stream, every such mapping ever defined must be known.

  Under this premise, a centralised repository of codec mappings would seem like a sensible idea, but alas, no such thing exists. It is simply impossible to obtain a exhaustive list of defined mappings, which makes the task of creating a complete implementation somewhat daunting.

  One brave soul, Tobias Waldvogel, created a mapping, OGM, capable of storing any Microsoft AVI compatible codec data in Ogg files. This format saw some use in the wild, but was frowned upon by Xiph, and it was eventually displaced by other formats.

  True generality is evidently not to be found with the Ogg format.

  A good example of a general-purpose format is Matroska. This container can trivially accommodate any codec, all it requires is a unique string to identify the codec. For codecs requiring setup data, a standard location for this is provided in the container. Furthermore, an official list of codec identifiers is maintained, meaning all information required to fully support Matroska files is available from one place.

  Matroska also has probably the greatest advantage of all : it is in active, wide-spread use. Historically, standards derived from existing practice have proven more successful than those created by a design committee.

  Overhead

  When designing a container format, one important consideration is that of overhead, i.e. the extra space required in addition to the elementary stream data being combined. For any given container, the overhead can be divided into a fixed part, independent of the total file size, and a variable part growing with increasing file size. The fixed overhead is not of much concern, its relative contribution being negligible for typical file sizes.

  The variable overhead in the Ogg format comes from the page headers, mostly from the segment_table field. This field uses a most peculiar encoding, somewhat reminiscent of Roman numerals. In Roman times, numbers were written as a sequence of symbols, each representing a value, the combined value being the sum of the constituent values.

  The segment_table field lists the sizes of all packets in the page. Each value in the list is coded as a number of bytes equal to 255 followed by a final byte with a smaller value. The packet size is simply the sum of all these bytes. Any strictly additive encoding, such as this, has the distinct drawback of coded length being linearly proportional to the encoded value. A value of 5000, a reasonable packet size for video of moderate bitrate, requires no less than 20 bytes to encode.

  On top of this we have the 27-byte page header which, although paling in comparison to the packet size encoding, is still much larger than necessary. Starting at the top of the list :

  • The version field could be disposed of, a single-bit marker being adequate to separate this first version from hypothetical future versions. One of the unused positions in the flags field could be used for this purpose
  • A 64-bit granule_position is completely overkill. 32 bits would be more than enough for the vast majority of use cases. In extreme cases, a one-bit flag could be used to signal an extended timestamp field.
  • 32-bit elementary stream number ? Are they anticipating files with four billion elementary streams ? An eight-bit field, if not smaller, would seem more appropriate here.
  • The 32-bit page_sequence_number is inexplicable. The intent is to allow detection of page loss due to transmission errors. ISO MPEG-TS uses a 4-bit counter per 188-byte packet for this purpose, and that format is used where packet loss actually happens, unlike any use of Ogg to date.
  • A mandatory 32-bit checksum is nothing but a waste of space when using a reliable storage/transmission medium. Again, a flag could be used to signal the presence of an optional checksum field.

  With the changes suggested above, the page header would shrink from 27 bytes to 12 bytes in size.

  We thus see that in an Ogg file, the packet size fields alone contribute an overhead of 1/255 or approximately 0.4%. This is a hard lower bound on the overhead, not attainable even in theory. In reality the overhead tends to be closer to 1%.

  Contrast this with the ISO MP4 file format, which can easily achieve an overhead of less than 0.05% with a 1 Mbps elementary stream.

  Latency

  In many applications end-to-end latency is an important factor. Examples include video conferencing, telephony, live sports events, interactive gaming, etc. With the codec layer contributing as little as 10 milliseconds of latency, the amount imposed by the container becomes an important factor.

  Latency in an Ogg-based system is introduced at both the sender and the receiver. Since the page header depends on the entire contents of the page (packet sizes and checksum), a full page of packets must be buffered by the sender before a single bit can be transmitted. This sets a lower bound for the sending latency at the duration of a page.

  On the receiving side, playback cannot commence until packets from all elementary streams are available. Hence, with two streams (audio and video) interleaved at the page level, playback is delayed by at least one page duration (two if checksums are verified).

  Taking both send and receive latencies into account, the minimum end-to-end latency for Ogg is thus twice the duration of a page, triple if strict checksum verification is required. If page durations are variable, the maximum value must be used in order to avoid buffer underflows.

  Minimum latency is clearly achieved by minimising the page duration, which in turn implies sending only one packet per page. This is where the size of the page header becomes important. The header for a single-packet page is 27 + packet_size/255 bytes in size. For a 1 Mbps video stream at 25 fps this gives an overhead of approximately 1%. With a typical audio packet size of 400 bytes, the overhead becomes a staggering 7%. The average overhead for a multiplex of these two streams is 1.4%.

  As it stands, the Ogg format is clearly not a good choice for a low-latency application. The key to low latency is small packets and fine-grained interleaving of streams, and although Ogg can provide both of these, by sending a single packet per page, the price in overhead is simply too high.

  ISO MPEG-PS has an overhead of 9 bytes on most packets (a 5-byte timestamp is added a few times per second), and Microsoft’s ASF has a 12-byte packet header. My suggestions for compacting the Ogg page header would bring it in line with these formats.

  Random access

  Any general-purpose container format needs to allow random access for direct seeking to any given position in the file. Despite this goal being explicitly mentioned in the Ogg specification, the format only allows the most crude of random access methods.

  While many container formats include an index allowing a time to be directly translated into an offset into the file, Ogg has nothing of this kind, the stated rationale for the omission being that this would require a two-pass multiplexing, the second pass creating the index. This is obviously not true ; the index could simply be written at the end of the file. Those objecting that this index would be unavailable in a streaming scenario are forgetting that seeking is impossible there regardless.

  The method for seeking suggested by the Ogg documentation is to perform a binary search on the file, after each file-level seek operation scanning for a page header, extracting the timestamp, and comparing it to the desired position. When the elementary stream encoding allows only certain packets as random access points (video key frames), a second search will have to be performed to locate the entry point closest to the desired time. In a large file (sizes upwards of 10 GB are common), 50 seeks might be required to find the correct position.

  A typical hard drive has an average seek time of roughly 10 ms, giving a total time for the seek operation of around 500 ms, an annoyingly long time. On a slow medium, such as an optical disc or files served over a network, the times are orders of magnitude longer.

  A factor further complicating the seeking process is the possibility of header emulation within the elementary stream data. To safeguard against this, one has to read the entire page and verify the checksum. If the storage medium cannot provide data much faster than during normal playback, this provides yet another substantial delay towards finishing the seeking operation. This too applies to both network delivery and optical discs.

  Although optical disc usage is perhaps in decline today, one should bear in mind that the Ogg format was designed at a time when CDs and DVDs were rapidly gaining ground, and network-based storage is most certainly on the rise.

  The final nail in the coffin of seeking is the codec-dependent timestamp format. At each step in the seeking process, the timestamp parsing specified by the codec mapping corresponding the current page must be invoked. If the mapping is not known, the best one can do is skip pages until one with a known mapping is found. This delays the seeking and complicates the implementation, both bad things.

  Timestamps

  A problem old as multimedia itself is that of synchronising multiple elementary streams (e.g. audio and video) during playback ; badly synchronised A/V is highly unpleasant to view. By the time Ogg was invented, solutions to this problem were long since explored and well-understood. The key to proper synchronisation lies in tagging elementary stream packets with timestamps, packets carrying the same timestamp intended for simultaneous presentation. The concept is as simple as it seems, so it is astonishing to see the amount of complexity with which the Ogg designers managed to imbue it. So bizarre is it, that I have devoted an entire article to the topic, and will not cover it further here.

  Complexity

  Video and audio decoding are time-consuming tasks, so containers should be designed to minimise extra processing required. With the data volumes involved, even an act as simple as copying a packet of compressed data can have a significant impact. Once again, however, Ogg lets us down. Despite the brevity of the specification, the format is remarkably complicated to parse properly.

  The unusual and inefficient encoding of the packet sizes limits the page size to somewhat less than 64 kB. To still allow individual packets larger than this limit, it was decided to allow packets spanning multiple pages, a decision with unfortunate implications. A page-spanning packet as it arrives in the Ogg stream will be discontiguous in memory, a situation most decoders are unable to handle, and reassembly, i.e. copying, is required.

  The knowledgeable reader may at this point remark that the MPEG-TS format also splits packets into pieces requiring reassembly before decoding. There is, however, a significant difference there. MPEG-TS was designed for hardware demultiplexing feeding directly into hardware decoders. In such an implementation the fragmentation is not a problem. Rather, the fine-grained interleaving is a feature allowing smaller on-chip buffers.

  Buffering is also an area in which Ogg suffers. To keep the overhead down, pages must be made as large as practically possible, and page size translates directly into demultiplexer buffer size. Playback of a file with two elementary streams thus requires 128 kB of buffer space. On a modern PC this is perhaps nothing to be concerned about, but in a small embedded system, e.g. a portable media player, it can be relevant.

  In addition to the above, a number of other issues, some of them minor, others more severe, make Ogg processing a painful experience. A selection follows :

  • 32-bit random elementary stream identifiers mean a simple table-lookup cannot be used. Instead the list of streams must be searched for a match. While trivial to do in software, it is still annoying, and a hardware demultiplexer would be significantly more complicated than with a smaller identifier.
  • Semantically ambiguous streams are possible. For example, the continuation flag (bit 1) may conflict with continuation (or lack thereof) implied by the segment table on the preceding page. Such invalid files have been spotted in the wild.
  • Concatenating independent Ogg streams forms a valid stream. While finding a use case for this strange feature is difficult, an implementation must of course be prepared to encounter such streams. Detecting and dealing with these adds pointless complexity.
  • Unusual terminology : inventing new terms for well-known concepts is confusing for the developer trying to understand the format in relation to others. A few examples :
    

    Ogg name	Usual name
    logical bitstream	elementary stream
    grouping	multiplexing
    lacing value	packet size (approximately)
    segment	imaginary element serving no real purpose
    granule position	timestamp

  Final words

  We have found the Ogg format to be a dubious choice in just about every situation. Why then do certain organisations and individuals persist in promoting it with such ferocity ?

  When challenged, three types of reaction are characteristic of the Ogg campaigners.

  On occasion, these people will assume an apologetic tone, explaining how Ogg was only ever designed for simple audio-only streams (ignoring it is as bad for these as for anything), and this is no doubt true. Why then, I ask again, do they continue to tout Ogg as the one-size-fits-all solution they already admitted it is not ?

  More commonly, the Ogg proponents will respond with hand-waving arguments best summarised as Ogg isn’t bad, it’s just different. My reply to this assertion is twofold :

  • Being too different is bad. We live in a world where multimedia files come in many varieties, and a decent media player will need to handle the majority of them. Fortunately, most multimedia file formats share some basic traits, and they can easily be processed in the same general framework, the specifics being taken care of at the input stage. A format deviating too far from the standard model becomes problematic.
  • Ogg is bad. When every angle of examination reveals serious flaws, bad is the only fitting description.

  The third reaction bypasses all technical analysis : Ogg is patent-free, a claim I am not qualified to directly discuss. Assuming it is true, it still does not alter the fact that Ogg is a bad format. Being free from patents does not magically make Ogg a good choice as file format. If all the standard formats are indeed covered by patents, the only proper solution is to design a new, good format which is not, this time hopefully avoiding the old mistakes.