Recherche avancée
Médias (91)
-
999,999
26 septembre 2011, par
Mis à jour : Septembre 2011
Langue : English
Type : Audio
-
The Slip - Artworks
26 septembre 2011, par
Mis à jour : Septembre 2011
Langue : English
Type : Texte
-
Demon seed (wav version)
26 septembre 2011, par
Mis à jour : Avril 2013
Langue : English
Type : Audio
-
The four of us are dying (wav version)
26 septembre 2011, par
Mis à jour : Avril 2013
Langue : English
Type : Audio
-
Corona radiata (wav version)
26 septembre 2011, par
Mis à jour : Avril 2013
Langue : English
Type : Audio
-
Lights in the sky (wav version)
26 septembre 2011, par
Mis à jour : Avril 2013
Langue : English
Type : Audio
Autres articles (11)
-
Déploiements possibles
31 janvier 2010, parDeux types de déploiements sont envisageable dépendant de deux aspects : La méthode d’installation envisagée (en standalone ou en ferme) ; Le nombre d’encodages journaliers et la fréquentation envisagés ;
L’encodage de vidéos est un processus lourd consommant énormément de ressources système (CPU et RAM), il est nécessaire de prendre tout cela en considération. Ce système n’est donc possible que sur un ou plusieurs serveurs dédiés.
Version mono serveur
La version mono serveur consiste à n’utiliser qu’une (...) -
Mise à disposition des fichiers
14 avril 2011, parPar défaut, lors de son initialisation, MediaSPIP ne permet pas aux visiteurs de télécharger les fichiers qu’ils soient originaux ou le résultat de leur transformation ou encodage. Il permet uniquement de les visualiser.
Cependant, il est possible et facile d’autoriser les visiteurs à avoir accès à ces documents et ce sous différentes formes.
Tout cela se passe dans la page de configuration du squelette. Il vous faut aller dans l’espace d’administration du canal, et choisir dans la navigation (...) -
Récupération d’informations sur le site maître à l’installation d’une instance
26 novembre 2010, parUtilité
Sur le site principal, une instance de mutualisation est définie par plusieurs choses : Les données dans la table spip_mutus ; Son logo ; Son auteur principal (id_admin dans la table spip_mutus correspondant à un id_auteur de la table spip_auteurs)qui sera le seul à pouvoir créer définitivement l’instance de mutualisation ;
Il peut donc être tout à fait judicieux de vouloir récupérer certaines de ces informations afin de compléter l’installation d’une instance pour, par exemple : récupérer le (...)
Sur d’autres sites (2198)
-
How to set crontab in order to run multiple python and a shell scripts ?
5 janvier 2021, par Alexander MitsouI need to start three python3 scripts and a shell script using crontab. These scripts should run at the same time without any delay. Each script runs exactly for one minute. For instance I have scheduled crontab to run these scripts every 5 minutes.


My problem is that, if I attempt to run each script individually from terminal it executes with no further errors, but using crontab nothing happens.


DISCLAIMER : If I set up the Python3 scripts individually in crontab, they work fine !


Here's my crontab set up :


*/5 * * * * cd /home/user/Desktop/ && /usr/bin/python3 script1.py >> report1.log

*/5 * * * * cd /home/user/Desktop/ && /usr/bin/python3 script2.py >> report2.log

*/5 * * * * cd /home/user/Desktop/ && /usr/bin/python3 script3.py >> report3.log

*/5 * * * * cd /home/user/Desktop/ && /usr/bin/sh script4.sh >> report4.log 


In addition I need to mention that the shell script contains this command (FFMPEG) :


#!/bin/bash

parent_dir=`dirname \`pwd\`` 
folder_name="/Data/Webcam" 
new_path=$parent_dir$folder_name 


if [ -d "$new_path" ]; then
 echo "video_audio folder exists..."
else
 echo "Creating video_audio folder in the current directory..."
 mkdir -p -- "$new_path"
 sudo chmod 777 "$new_path"
 echo "Folder created"
 echo
fi

now=$(date +%F) 
now="$( echo -e "$now" | tr '-' '_' )"
sub_dir=$new_path'/'$now 

if [ -d "$sub_dir" ]; then
 echo "Date Sub-directory exists..."
 echo
else
 echo "Error: ${sub_dir} not found..."
 echo "Creating date sub-directory..."
 mkdir -p -- "$sub_dir"
 sudo chmod 777 "$sub_dir"
 echo "Date sub-directory created..."
 echo
fi

fname=$(date +%H_%M_%S)".avi"
video_dir=$sub_dir'/'$fname
ffmpeg -f pulse -ac 1 -i default -f v4l2 -i /dev/video0 -vcodec libx264 -t 00:01:00 $video_dir 


The log file of that script contain the following :


video_audio folder exists...
Date Sub-directory exists...

Package ffmpeg is already installed...
Package v4l-utils is already installed...

Package: ffmpeg
Status: install ok installed
Priority: optional
Section: video
Installed-Size: 2010
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 7:4.2.4-1ubuntu0.1
Replaces: libav-tools (<< 6:12~~), qt-faststart (<< 7:2.7.1-3~)
Depends: libavcodec58 (= 7:4.2.4-1ubuntu0.1), libavdevice58 (= 7:4.2.4-1ubuntu0.1), libavfilter7 (= 7:4.2.4-1ubuntu0.1), libavformat58 (= 7:4.2.4-1ubuntu0.1), libavresample4 (= 7:4.2.4-1ubuntu0.1), libavutil56 (= 7:4.2.4-1ubuntu0.1), libc6 (>= 2.29), libpostproc55 (= 7:4.2.4-1ubuntu0.1), libsdl2-2.0-0 (>= 2.0.10), libswresample3 (= 7:4.2.4-1ubuntu0.1), libswscale5 (= 7:4.2.4-1ubuntu0.1)
Suggests: ffmpeg-doc
Breaks: libav-tools (<< 6:12~~), qt-faststart (<< 7:2.7.1-3~), winff (<< 1.5.5-5~)
Description: Tools for transcoding, streaming and playing of multimedia files
 FFmpeg is the leading multimedia framework, able to decode, encode, transcode,
 mux, demux, stream, filter and play pretty much anything that humans and
 machines have created. It supports the most obscure ancient formats up to the
 cutting edge.
 .
 This package contains:
 * ffmpeg: a command line tool to convert multimedia files between formats
 * ffplay: a simple media player based on SDL and the FFmpeg libraries
 * ffprobe: a simple multimedia stream analyzer
 * qt-faststart: a utility to rearrange Quicktime files
Homepage: https://ffmpeg.org/
Original-Maintainer: Debian Multimedia Maintainers <debian-multimedia@lists.debian.org>
Package: v4l-utils
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 2104
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.18.0-2build1
Replaces: ivtv-utils (<< 1.4.1-2), media-ctl
Depends: libv4l-0 (= 1.18.0-2build1), libv4l2rds0 (= 1.18.0-2build1), libc6 (>= 2.17), libgcc-s1 (>= 3.0), libstdc++6 (>= 5.2), libudev1 (>= 183)
Breaks: ivtv-utils (<< 1.4.1-2), media-ctl
Description: Collection of command line video4linux utilities
 v4l-utils contains the following video4linux command line utilities:
 .
 decode_tm6000: decodes tm6000 proprietary format streams
 rds-ctl: tool to receive and decode Radio Data System (RDS) streams
 v4l2-compliance: tool to test v4l2 API compliance of drivers
 v4l2-ctl, cx18-ctl, ivtv-ctl: tools to control v4l2 controls from the cmdline
 v4l2-dbg: tool to directly get and set registers of v4l2 devices
 v4l2-sysfs-path: sysfs helper tool
Original-Maintainer: Gregor Jasny <gjasny@googlemail.com>
Homepage: https://linuxtv.org/downloads/v4l-utils/


Due to the reason that the python files are of the same structure I'm uploading a sample file here :


# -*- coding: utf-8 -*-
from threading import Timer
from pynput.mouse import Listener
import logging
import sys
import os
sys.path.insert(0, os.path.join(os.path.dirname(
 os.path.realpath(__file__)), "../"))

from Functions import utils as ut

if __name__=='__main__':

 ut.initialize_dirs()
 rec_file = ''.join(('mouse_',ut.get_date(),'.txt'))
 raw_data = ut.get_name('Mouse')
 rec_file = os.path.join(raw_data,rec_file)
 logging.basicConfig(filename=rec_file,level=logging.DEBUG,format="%(asctime)s %(message)s")

 try:
 with Listener(on_move=ut.on_move, on_click=ut.on_click,on_scroll=ut.on_scroll) as listener:
 Timer(60, listener.stop).start()
 listener.join()
 except KeyboardInterrupt as err:
 print(err)
 sys.exit(0)

 print('Exiting logger...')



I'm also uploading the functions that I use :


# -*- coding: utf-8 -*-
from serial import Serial
from datetime import datetime, timedelta
import pandas as pd
import collections
import logging
import shutil
import serial
import time
import sys
import os

click_held = False
button = None


def on_move(x,y):
 """The callback to call when mouse move events occur

 Args:
 x (float): The new pointer position
 y (float): The new pointer poisition
 """
 if click_held:
 logging.info("MV {0:>8} {1:>8} {2:>8}:".format(x,y,str(None)))
 else:
 logging.info("MV {0:>8} {1:>8} {2:>8}:".format(x,y,str(None)))


def on_click(x,y,button,pressed):
 """The callback to call when a mouse button is clicked

 Args:
 x (float): Mouse coordinates on screen
 y (float): Mouse coordinates on screen
 button (str): one of the Button values
 pressed (bool): Pressed is whether the button was pressed
 """
 global click_held
 if pressed:
 click_held = True
 logging.info("CLK {0:>7} {1:>6} {2:>13}".format(x,y,button))
 else:
 click_held = False
 logging.info("RLS {0:>7} {1:>6} {2:>13}".format(x,y,button))


def on_scroll(x,y,dx,dy):
 """The callback to call when mouse scroll events occur

 Args:
 x (float): The new pointer position on screen
 y (float): The new pointer position on screen
 dx (int): The horizontal scroll. The units of scrolling is undefined
 dy (int): The vertical scroll. The units of scrolling is undefined
 """
 if dy == -1:
 logging.info("SCRD {0:>6} {1:>6} {2:>6}".format(x,y,str(None)))
 elif dy == 1:
 logging.info("SCRU {0:>6} {1:>6} {2:>6}".format(x,y,str(None)))
 else:
 pass


def on_press_keys(key):
 """The callback to call when a button is pressed.

 Args:
 key (str): A KeyCode,a Key or None if the key is unknown
 """
 subkeys = [
 'Key.alt','Key.alt_gr','Key.alt_r','Key.backspace',
 'Key.space','Key.ctrl','Key.ctrl_r','Key.down',
 'Key.up','Key.left','Key.right','Key.page_down',
 'Key.page_up','Key.enter','Key.shift','Key.shift_r'
 ]

 key = str(key).strip('\'')
 if(key in subkeys):
 #print(key)
 logging.info(key)
 else:
 pass


def record_chair(output_file):
 """Read the data stream coming from the serial monitor
 in order to get the sensor readings

 Args:
 output_file (str): The file name, where the data stream will be stored
 """
 serial_port = "/dev/ttyACM0"
 baud_rate = 9600
 ser = serial.Serial(serial_port,baud_rate)
 logging.basicConfig(filename=output_file,level=logging.DEBUG,format="%(asctime)s %(message)s")
 flag = False
 start = time.time()
 while time.time() - start < 60.0:
 try:
 serial_data = str(ser.readline().decode().strip('\r\n'))
 time.sleep(0.2)
 tmp = serial_data.split(' ')[0] #Getting Sensor Id
 if(tmp == 'A0'):
 flag = True
 if (flag and tmp != 'A4'):
 #print(serial_data)
 logging.info(serial_data)
 if(flag and tmp == 'A4'):
 flag = False
 #print(serial_data)
 logging.info(serial_data)
 except (UnicodeDecodeError, KeyboardInterrupt) as err:
 print(err)
 print(err.args)
 sys.exit(0)


def initialize_dirs():
 """Create the appropriate directories in order to save
 and process the collected data
 """
 current_path = os.path.abspath(os.getcwd())
 os.chdir('..')
 current_path = (os.path.abspath(os.curdir)) #/Multodal_User_Monitoring
 current_path = os.path.join(current_path,'Data')
 create_subdirs([current_path])

 #Create mouse log folder
 mouse = os.path.join(current_path,'Mouse')
 create_subdirs([mouse])
 #Create mouse subfolders
 names = concat_names(mouse)
 create_subdirs(names)

 #Create keyboard log folder
 keyboard = os.path.join(current_path,'Keyboard')
 create_subdirs([keyboard])
 #Create keyboard subfolders
 names = concat_names(keyboard)
 create_subdirs(names)

 #Create the chair log folder
 chair = os.path.join(current_path,'Chair')
 create_subdirs([chair])
 #Create chair subfolders
 names = concat_names(chair)
 create_subdirs(names)

 #Create webcam log folder
 webcam = os.path.join(current_path,'Webcam')
 create_subdirs([webcam])

def concat_names(dir) -> str:
 """Concatenate the given folder names
 with the appropriate path

 Args:
 dir (str): The directory to create the subfolders

 Returns:
 list: The new absolute paths
 """
 raw_data = os.path.join(dir,'Raw')
 edited_data = os.path.join(dir,'Edited_logs')
 csv_data = os.path.join(dir,'CSV')
 features = os.path.join(dir,'Features')
 dirs = [raw_data,edited_data,csv_data,features]
 return dirs


def create_subdirs(paths):
 """Create sub directories given some absolute paths

 Args:
 paths (list): A list containing the paths to be created
 """
 for index,path in enumerate(paths):
 if(os.path.isdir(paths[index])):
 pass
 else:
 os.mkdir(paths[index])


def round_down(num,divisor) -> int:
 """Round the number of lines contained into the recording file,
 down to the nearest multiple of the given divisor

 Args:
 num (int): The number of lines contained into the given log file
 divisor (int): The divisor in order to get tuples of divisor

 Returns:
 int: The nearest multiple of five
 """
 return num-(num%divisor)


def get_date() -> str:
 """Get the current date in order to properly name
 the recored log files
 Returns:
 str: The current date in: YY_MM_DD format
 """
 return datetime.now().strftime('%Y_%m_%d')


def get_name(modality) -> str:
 """Save the recorded log into /Data//Raw

 Args:
 modality (str): The log data source

 Returns:
 str: The absolute path where each recording is saved
 """
 current_path = os.path.abspath(os.getcwd())
 current_path = os.path.join(current_path,'Data')

 if modality == 'Chair':
 chair_path = os.path.join(current_path,modality,'Raw')
 return chair_path

 elif modality == 'Mouse':
 mouse_path = os.path.join(current_path,modality,'Raw')
 return mouse_path

 elif modality == 'Keyboard':
 keyboard_path = os.path.join(current_path,modality,'Raw')
 return keyboard_path


def crawl_dir(target,folder) -> str:
 """Enumerate all the given files in a directory
 based on the given file extension

 Args:
 target (str): The file to search for
 folder (str): The folder to search

 Returns:
 [type]: A list containing the file names
 """
 current_path = os.path.abspath(os.getcwd())
 path = os.path.join(current_path,folder)
 file_names =[]
 for f in os.listdir(path):
 if(f.endswith(target)):
 fname=os.path.join(path,f)
 file_names.append(fname)
 return file_names


def convert_keys2_csv(input_file,output_file):
 """Convert the data stream file(keylogger recording) from .txt to .csv format

 Args:
 input_file (str): The data stream file in .txt format
 output_file (str): The csv extension file name
 """
 df = pd.read_fwf(input_file)
 col_names = ['Date','Time','Key']
 df.to_csv(output_file,header=col_names,encoding='utf-8',index=False)


def convert_mouse2_csv(input_file,output_file):
 """Convert the data stream file(mouselogger recording) from .txt to .csv format

 Args:
 input_file (str): The data stream file in .txt format
 output_file (str): The csv extension file name
 """
 df = pd.read_fwf(input_file)
 col_names = ['Date','Time','Action','PosX','PosY','Button']
 df.to_csv(output_file,header=col_names,encoding='utf-8',index=False)


def convert_chair_2_csv(input_file,output_file):
 """Convert the data stream file(chair recording)
 from .txt to .csv format

 Args:
 input_file (str): The data stream file in .txt format
 output_file (str): The csv extension file name
 """
 if(os.path.isfile(input_file)):
 pass
 else:
 print('Invalid working directory...')
 print('Aborting...')
 sys.exit(0)

 tmp0,tmp1,tmp2,tmp3,tmp4 = 0,1,2,3,4

 line_number = 0
 for line in open(input_file).readlines():
 line_number += 1

 rounded_line = round_down(line_number,5)
 d = collections.defaultdict(list)

 with open(input_file,'r') as f1:
 lines = f1.readlines()
 for i in range(rounded_line // 5):
 #Sensor:Analog input 0 values
 Sid0 = lines[i+tmp0]
 temp = Sid0.split()
 d['Sid0'].append([temp[0],temp[1],temp[2],temp[3]])
 #Sensor:Analog input 1 values
 Sid1 = lines[i+tmp1]
 temp = Sid1.split()
 d['Sid1'].append([temp[0],temp[1],temp[2],temp[3]])
 #Sensor:Analog input 2 values
 Sid2 = lines[i+tmp2]
 temp = Sid2.split()
 d['Sid2'].append([temp[0],temp[1],temp[2],temp[3]])
 #Sensor:Analog input 3 values
 Sid3 = lines[i+tmp3]
 temp = Sid3.split()
 d['Sid3'].append([temp[0],temp[1],temp[2],temp[3]])
 #Sensor:Analog input 4 values
 Sid4 = lines[i+tmp4]
 temp = Sid4.split()
 d['Sid4'].append([temp[0],temp[1],temp[2],temp[3]])

 tmp0 += 4
 tmp1 += 4
 tmp2 += 4
 tmp3 += 4
 tmp4 += 4

 l = []
 for i in range(rounded_line // 5):
 date = d['Sid0'][i][0]
 time = d['Sid0'][i][1]
 A0_val = d['Sid0'][i][3]
 A1_val = d['Sid1'][i][3]
 A2_val = d['Sid2'][i][3]
 A3_val = d['Sid3'][i][3]
 A4_val = d['Sid4'][i][3]
 l.append([date,time,A0_val,A1_val,A2_val,A3_val,A4_val])

 sensor_readings_df = pd.DataFrame.from_records(l)
 sensor_readings_df.columns = ['Date','Time','A0','A1','A2','A3','A4']
 sensor_readings_df.to_csv(output_file, encoding='utf-8', index=False)
 del l


def parse_raw_data(modality):
 """Convert each modality's raw data into csv format and move
 the edited raw data into the appropriate Edited_logs folder

 Args:
 modality (str): The data source
 """
 #Change directories
 current_path = os.path.abspath(os.getcwd()) #/Functions
 os.chdir('..')
 current_path = (os.path.abspath(os.curdir)) #/Multimodal_User_Monitoring
 os.chdir('./Data')#/Multimodal_User_Monitoring/Data
 current_path = (os.path.abspath(os.curdir)) #/Multimodal_User_Monitoring/Data
 current_path = os.path.join(current_path,modality) #example: /Multimodal_User_Monitoring/Data/<modality>
 raw_data_path = os.path.join(current_path,'Raw')
 csv_data_path = os.path.join(current_path,'CSV')
 edited_logs_path = os.path.join(current_path,'Edited_logs')

 txt_names = crawl_dir('.txt',raw_data_path)
 csv_names = []
 for elem in txt_names:
 name = elem.split('/')[-1].split('.')[0]
 csv_name = name+'.csv'
 tmp = os.path.join(csv_data_path,csv_name)
 csv_names.append(tmp)

 if modality == 'Mouse':
 if len(txt_names) == len(csv_names):
 for i, elem in enumerate(txt_names):
 #for i in range(len(txt_names)):
 convert_mouse2_csv(txt_names[i],csv_names[i])
 shutil.move(txt_names[i],edited_logs_path)

 elif modality == 'Keyboard':
 if len(txt_names) == len(csv_names):
 for i, elem in enumerate(txt_names):
 #for i in range(len(txt_names)):
 convert_keys2_csv(txt_names[i],csv_names[i])
 shutil.move(txt_names[i],edited_logs_path)

 elif modality == 'Chair':
 if len(txt_names) == len(csv_names):
 for i, elem in enumerate(txt_names):
 #for i in range(len(txt_names)):
 convert_chair_2_csv(txt_names[i],csv_names[i])
 shutil.move(txt_names[i],edited_logs_path)

</modality>

I need to mention that the logs of the python3 scripts are empty


-
Revision 26210c672a : Adds test code for supplemental superframe data Adds test code to verify that s
4 avril 2014, par Deb MukherjeeChanged Paths :
Modify /vp9/vp9_cx_iface.c
Adds test code for supplemental superframe dataAdds test code to verify that supplemental superframe information
that precedes the normal superframe information will not break
decoding.Change-Id : Ia252b887d7ee138f51dc9a778376ff739402c455
-
avformat/riff.h : remove unused function parameter "const AVCodecTag *tags" of "void...
14 juillet 2017, par Aleksandr Slobodeniukavformat/riff.h : remove unused function parameter "const AVCodecTag *tags" of "void ff_put_bmp_header()"
Reviewed-by : Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by : Michael Niedermayer <michael@niedermayer.cc>
Syndiquer tout le site
