Recherche avancée

Sur d’autres sites (4749)

• ffserver / ffmpeg error rasperberry pi

  21 octobre 2017, par Skysurf

  on rasperberry pi 2 (jessie) with web cam i run on terminal :
  ffserver start & avconv -f video4linux2 -r 25 -i /dev/video0 -f alsa -ac 1 -i hw:1,0 http://localhost:8090/feed1.ffm

  i get this error:
  
  
  
  The driver changed the time per frame from 1/25 to 1/30
  
  Input #0, video4linux2,v4l2, from '/dev/video0':
  
  Duration: N/A, start: 91550.051357, bitrate: 147456 kb/s
  
  Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 640x480, 147456 kb/s, 30 fps, 30 tbr, 1000k tbn, 1000k tbc
  
  Guessed Channel Layout for Input Stream #1.0 : mono
  
  Input #1, alsa, from 'hw:1,0':
  
  Duration: N/A, start: 1508451910.083274, bitrate: 768 kb/s
  
  Stream #1:0: Audio: pcm_s16le, 48000 Hz, mono, s16, 768 kb/s`enter code here`
  
  [tcp @ 0x15ca6c0] Connection to tcp://localhost:8090 failed (Connection refused), trying next address
  
  Thu Oct 19 23:25:10 2017 127.0.0.1 - - [GET] "/feed1.ffm HTTP/1.1" 200 4175
  
  [tcp @ 0x15dba80] Connection to tcp://localhost:8090 failed (Connection refused), trying next address
  
  [mpeg1video @ 0x15df560] MPEG-1/2 does not support 3/1 fps
  
  Stream mapping:
  
    Stream #1:0 -> #0:0 (pcm_s16le (native) -> mp2 (native))
  
    Stream #0:0 -> #0:1 (rawvideo (native) -> mpeg1video (native))
  
    Stream #1:0 -> #0:2 (pcm_s16le (native) -> wmav2 (native))
  
    Stream #0:0 -> #0:3 (rawvideo (native) -> msmpeg4v3 (msmpeg4))
  
  Error while opening encoder for output stream #0:1 - maybe incorrect parameters such as bit_rate, rate, width or height
  
  Thu Oct 19 23:25:10 2017 127.0.0.1 - - [POST] "/feed1.ffm HTTP/1.1" 200 0
  
  anyone can help me to solve ? i want to heard audio too and image on stream??

  enter link description here

• Can't get ffmpeg to stream webcam [on hold]

  29 novembre 2017, par joey

  I have a rapsberry with ffmpeg installed and a microsoft hd3000 cam installed
  I run the following command :
  ffserver -f /etc/ffserver.conf & ffmpeg -framerate 21 -re -f video4linux2 -i /dev/video0 -f alsa -i sysdefault:CARD=HD3000 http://localhost:8090/feed1.ffm

  and i get the following :

  /etc/ffserver.conf:164: Setting default value for video bit rate tolerance = 16000. Use NoDefaults to disable it.
  
  /etc/ffserver.conf:164: Setting default value for video rate control equation = tex^qComp. Use NoDefaults to disable it.
  
  /etc/ffserver.conf:164: Setting default value for video max rate = 6229744. Use NoDefaults to disable it.
  
  /etc/ffserver.conf:219: Setting default value for audio sample rate = 22050. Use NoDefaults to disable it.
  
  /etc/ffserver.conf:219: Setting default value for audio channel count = 1. Use NoDefaults to disable it.
  
  /etc/ffserver.conf:219: Setting default value for video bit rate tolerance = 64000. Use NoDefaults to disable it.
  
  /etc/ffserver.conf:219: Setting default value for video rate control equation = tex^qComp. Use NoDefaults to disable it.
  
  /etc/ffserver.conf:219: Setting default value for video max rate = 6369328. Use NoDefaults to disable it.
  
  bind(port 8090): Address already in use
  
  Wed Nov 29 13:17:49 2017 Could not start server
  
  [video4linux2,v4l2 @ 0x1a35630] The driver changed the time per frame from 1/21 to 1/10
  
  Input #0, video4linux2,v4l2, from '/dev/video0':
  
    Duration: N/A, start: 12116.079136, bitrate: 147456 kb/s
  
      Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 1280x720, 147456 kb/s, 10 fps, 10 tbr, 1000k tbn, 1000k tbc
  
  Guessed Channel Layout for Input Stream #1.0 : stereo
  
  Input #1, alsa, from 'sysdefault:CARD=HD3000':
  
    Duration: N/A, start: 1511961469.424072, bitrate: 1536 kb/s
  
      Stream #1:0: Audio: pcm_s16le, 48000 Hz, stereo, s16, 1536 kb/s
  
  [tcp @ 0x1a44160] Connection to tcp://localhost:8090 failed (Connection refused), trying next address
  
  Wed Nov 29 13:17:49 2017 127.0.0.1 - - [GET] "/feed1.ffm HTTP/1.1" 200 4175
  
  [tcp @ 0x1a63ca0] Connection to tcp://localhost:8090 failed (Connection refused), trying next address
  
  [mpeg1video @ 0x1a6ecb0] bitrate tolerance 21333 too small for bitrate 64000, overriding
  
  [mpeg1video @ 0x1a6ecb0] MPEG-1/2 does not support 3/1 fps
  
  Stream mapping:
  
    Stream #1:0 -> #0:0 (pcm_s16le (native) -> mp2 (native))
  
    Stream #0:0 -> #0:1 (rawvideo (native) -> mpeg1video (native))
  
    Stream #1:0 -> #0:2 (pcm_s16le (native) -> wmav2 (native))
  
    Stream #0:0 -> #0:3 (rawvideo (native) -> msmpeg4v3 (msmpeg4))
  
  Error while opening encoder for output stream #0:1 - maybe incorrect parameters such as bit_rate, rate, width or height
  
  Wed Nov 29 13:17:49 2017 127.0.0.1 - - [POST] "/feed1.ffm HTTP/1.1" 200 0
  
  [2]+  Exit 1                  ffserver -f /etc/ffserver.conf

  I use the default /etc/ffserver.conf.
  I can’t seem to figur out what is the problem.

• Streaming by ffserver and ffmpeg on RaspberryPi

  15 septembre 2018, par saitoib

  I want to ditribute the video of the UVC Camera on Rpsberry Pi
  I edited /etc/ffserver.conf as follows.

  HTTPPort 8090
  
  HTTPBindAddress 0.0.0.0
  
  MaxHTTPConnections 20
  
  MaxClients 10
  
  MaxBandwidth 500000
  
  CustomLog -
  
  
  
  <feed>
  
  File /tmp/feed1.ffm
  
  FileMaxSize 50M
  
  </feed>
  
  
  
  <stream>
  
  Format status
  
  ACL allow 192.168.12.0 192.168.12.255
  
  </stream>
  
  
  
  <stream>
  
  Feed feed1.ffm
  
  Format mpeg
  
  VideoSize hd720
  
  VideoFrameRate 15
  
  VideoBitRate 4096
  
  VideoBufferSize 4096
  
  VideoQMin 5
  
  VideoQMax 51
  
  Strict -1
  
  </stream>

  Then, I started ffserver
  Next, I executed the following command

  ffmpeg -f v4l2 -s 1280x720 -i /dev/video0 -ac 1 -f alsa -i hw:1,0 http://localhost:8090/feed1.ffm

  I requested 192.168.12.101 : 8090 / test.mpeg from FireFox on the same network,
  but no video is displayed and a program to open or a file save dialog opens.

  What should I do ?

  Execution result of Raspberry Pi

  Input #0, video4linux2,v4l2, from '/dev/video0':
  
    Duration: N/A, start: 519134.790720, bitrate: 147456 kb/s
  
      Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 1280x720, 147456 kb/s, 10 fps, 10 tbr, 1000k tbn, 1000k tbc
  
  Guessed Channel Layout for Input Stream #1.0 : mono
  
  Input #1, alsa, from 'hw:1,0':
  
    Duration: N/A, start: 1536994777.250578, bitrate: 768 kb/s
  
      Stream #1:0: Audio: pcm_s16le, 48000 Hz, mono, s16, 768 kb/s
  
  [tcp @ 0x23ec7f0] Connection to tcp://localhost:8090 failed (Connection refused), trying next address
  
  Sat Sep 15 15:59:37 2018 [ffm @ 0xf10e40]Using AVStream.codec to pass codec parameters to muxers is deprecated, use AVStream.codecpar instead.
  
  Sat Sep 15 15:59:37 2018 [ffm @ 0xf10e40]Using AVStream.codec to pass codec parameters to muxers is deprecated, use AVStream.codecpar instead.
  
  Sat Sep 15 15:59:37 2018 127.0.0.1 - - [GET] "/feed1.ffm HTTP/1.1" 200 4175
  
  [tcp @ 0x2401d50] Connection to tcp://localhost:8090 failed (Connection refused), trying next address
  
  Output #0, ffm, to 'http://localhost:8090/feed1.ffm':
  
    Metadata:
  
      creation_time   : now
  
      encoder         : Lavf57.56.101
  
      Stream #0:0: Audio: mp2, 22050 Hz, mono, s16, 64 kb/s
  
      Metadata:
  
        encoder         : Lavc57.64.101 mp2
  
      Stream #0:1: Video: mpeg1video, yuv420p, 1280x720, q=5-51, 4096 kb/s, 10 fps, 1000k tbn, 15 tbc
  
      Metadata:
  
        encoder         : Lavc57.64.101 mpeg1video
  
      Side data:
  
        cpb: bitrate max/min/avg: 8192000/0/4096000 buffer size: 33554432 vbv_delay: -1
  
  Stream mapping:
  
    Stream #1:0 -> #0:0 (pcm_s16le (native) -> mp2 (native))
  
    Stream #0:0 -> #0:1 (rawvideo (native) -> mpeg1video (native))
  
  Press [q] to stop, [?] for help
  
  [alsa @ 0x23ebee0] Thread message queue blocking; consider raising the thread_queue_size option (current value: 8)
  
  [alsa @ 0x23ebee0] ALSA buffer xrun. 48kB time=00:00:00.13 bitrate=2949.1kbits/s dup=3 drop=0 speed=0.251x
  
  [video4linux2,v4l2 @ 0x23ea230] Thread message queue blocking; consider raising the thread_queue_size option (current value: 8)
  
  [alsa @ 0x23ebee0] ALSA buffer xrun.276kB time=00:00:02.40 bitrate= 942.1kbits/s dup=30 drop=0 speed=0.201x
  
  Sat Sep 15 15:59:55 2018 [mpeg @ 0xf136d0]VBV buffer size not set, using default size of 130KB speed=0.844x
  
  If you want the mpeg file to be compliant to some specification
  
  Like DVD, VCD or others, make sure you set the correct buffer size
  
  frame=  107 fps=3.1 q=2.0 Lsize=     856kB time=00:00:14.06 bitrate= 498.6kbits/s dup=80 drop=0 speed=0.413x
  
  video:844kB audio:2kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 1.120285%
  
  Sat Sep 15 16:00:11 2018 127.0.0.1 - - [POST] "/feed1.ffm HTTP/1.1" 200 876544
  
  Sat Sep 15 16:00:11 2018 [mpeg @ 0xf136d0]buffer underflow st=0 bufi=0 size=418
  
  Sat Sep 15 16:00:11 2018 192.168.12.150 - - [GET] "/test.mpeg HTTP/1.1" 200 29263
  
  Exiting normally, received signal 2.

  Result of 192.168.12.101:8090

  ffserver Status
  
  Available Streams
  
  Path    Served
  
  Conns   
  
  bytes   Format  Bit rate
  
  kbit/s  Video
  
  kbit/s  
  
  Codec   Audio
  
  kbit/s  
  
  Codec   Feed
  
  index.html  1   0   -   -   -       -   
  
  test.mpeg   0   0   mpeg    4160    4096    mpeg1video  64  mp2     feed1.ffm
  
  Feed feed1.ffm
  
  Stream  type    kbit/s  codec   Parameters
  
  0   audio   64  mp2 1 channel(s), 22050 Hz
  
  1   video   4096    mpeg1video  1280x720, q=5-51, fps=15
  
  Connection Status
  
  Number of connections: 1 / 10
  
  Bandwidth in use: 0k / 10000k
  
  #   File    IP  Proto   State   Target bit/s    Actual bit/s    Bytes transferred
  
  1   index.html  192.168.12.150  HTTP/1.1    HTTP_WAIT_REQUEST   0   0   0