Recherche avancée

Sur d’autres sites (4560)

• Ffmpeg RTSP stream with size=N/A bitrate=N/A [closed]

  6 octobre 2024, par Comycos

  When I try to stream a video it seems to work but bitrate and size are N/A frame=  277 fps= 26 q=-1.0 size=N/A time=00:00:11.07 bitrate=N/A speed=1.05x

  


  I run the following command to stream a video to a RTSP server :
ffmpeg -re -stream_loop -1 -i idurre-2024-09-17-12h33m19s.mp4 -c copy -f rtsp -rtsp_transport tcp rtsp://localhost:8554/test

  


  The output ffmpeg is like this :

  


  ffmpeg version 7.1 Copyright (c) 2000-2024 the FFmpeg developers
  built with Apple clang version 15.0.0 (clang-1500.1.0.2.5)
  configuration: --prefix=/opt/homebrew/Cellar/ffmpeg/7.1 --enable-shared --enable-pthreads --enable-version3 --cc=clang --host-cflags= --host-ldflags='-Wl,-ld_classic' --enable-ffplay --enable-gnutls --enable-gpl --enable-libaom --enable-libaribb24 --enable-libbluray --enable-libdav1d --enable-libharfbuzz --enable-libjxl --enable-libmp3lame --enable-libopus --enable-librav1e --enable-librist --enable-librubberband --enable-libsnappy --enable-libsrt --enable-libssh --enable-libsvtav1 --enable-libtesseract --enable-libtheora --enable-libvidstab --enable-libvmaf --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libspeex --enable-libsoxr --enable-libzmq --enable-libzimg --disable-libjack --disable-indev=jack --enable-videotoolbox --enable-audiotoolbox --enable-neon
  libavutil      59. 39.100 / 59. 39.100
  libavcodec     61. 19.100 / 61. 19.100
  libavformat    61.  7.100 / 61.  7.100
  libavdevice    61.  3.100 / 61.  3.100
  libavfilter    10.  4.100 / 10.  4.100
  libswscale      8.  3.100 /  8.  3.100
  libswresample   5.  3.100 /  5.  3.100
  libpostproc    58.  3.100 / 58.  3.100
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x127704880] st: 0 edit list: 1 Missing key frame while searching for timestamp: 0
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x127704880] st: 0 edit list 1 Cannot find an index entry before timestamp: 0.
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'idurre-2024-09-17-12h33m19s.mp4':
  Metadata:
    major_brand     : isom
    minor_version   : 0
    compatible_brands: mp41avc1
    creation_time   : 2024-09-17T10:34:16.000000Z
    encoder         : vlc 3.0.21 stream output
    encoder-eng     : vlc 3.0.21 stream output
  Duration: 00:00:55.68, start: 0.000000, bitrate: 16205 kb/s
  Stream #0:0[0x1](eng): Video: h264 (High) (avc1 / 0x31637661), yuvj420p(pc, bt709, progressive), 1920x1080, 16203 kb/s, 25 fps, 25 tbr, 1000k tbn (default)
      Metadata:
        creation_time   : 2024-09-17T10:34:16.000000Z
        handler_name    : VideoHandler
        vendor_id       : [0][0][0][0]
Stream mapping:
  Stream #0:0 -> #0:0 (copy)
Output #0, rtsp, to 'rtsp://localhost:8554/test':
  Metadata:
    major_brand     : isom
    minor_version   : 0
    compatible_brands: mp41avc1
    encoder         : Lavf61.7.100
  Stream #0:0(eng): Video: h264 (High) (avc1 / 0x31637661), yuvj420p(pc, bt709, progressive), 1920x1080, q=2-31, 16203 kb/s, 25 fps, 25 tbr, 90k tbn (default)
      Metadata:
        creation_time   : 2024-09-17T10:34:16.000000Z
        handler_name    : VideoHandler
        vendor_id       : [0][0][0][0]
Press [q] to stop, [?] for help
frame=  516 fps= 26 q=-1.0 size=N/A time=00:00:20.63 bitrate=N/A speed=1.03x    

[q] command received. Exiting.

[out#0/rtsp @ 0x6000008e0240] video:40672KiB audio:0KiB subtitle:0KiB other streams:0KiB global headers:0KiB muxing overhead: unknown
frame=  528 fps= 26 q=-1.0 Lsize=N/A time=00:00:21.11 bitrate=N/A speed=1.02x    


  


  The server I'm streaming to is a MediaMTX which is supposed to receive the stream. It seems to be connected as it logs it :

  


  mediamtx-rtsp  | 2024/10/06 10:35:13 INF MediaMTX v1.9.0
mediamtx-rtsp  | 2024/10/06 10:35:13 INF configuration loaded from /mediamtx.yml
mediamtx-rtsp  | 2024/10/06 10:35:13 INF [RTSP] listener opened on :8554 (TCP), :8000 (UDP/RTP), :8001 (UDP/RTCP)
mediamtx-rtsp  | 2024/10/06 10:35:13 INF [SRT] listener opened on :8890 (UDP)
mediamtx-rtsp  | 2024/10/06 10:35:16 INF [RTSP] [conn 192.168.65.1:17069] opened
mediamtx-rtsp  | 2024/10/06 10:35:16 INF [RTSP] [session b3bb2623] created by 192.168.65.1:17069
mediamtx-rtsp  | 2024/10/06 10:35:16 INF [RTSP] [session b3bb2623] is publishing to path 'test', 1 track (H264)


  


  But when I try to read it with ffplay nothing is showing...

  


• FFMpegCore.Exceptions.FFMpegException : 'ffmpeg exited with non-zero exit-code'

  15 octobre 2024, par secretply

  I am looking to retrieve the loudnorm data in JSON format from FFmpeg (using FFMpegCore 5.1.0). This is the code I currently have :

  


  await FFMpegArguments
    .FromPipeInput(new StreamPipeSource(fileStream.OpenReadStream()))
    .OutputToPipe(new StreamPipeSink(outputStream), options => options.WithCustomArgument("-af loudnorm=print_format=json"))
    .ProcessAsynchronously();


  


  This is the exception I get, which is similar to this old GitHub issue.

  


  System.IO.IOException: 'Pipe is broken.'

This exception was originally thrown at this call stack:
    System.IO.Pipes.PipeStream.PipeValueTaskSource.GetResult(short)
    System.IO.Pipes.PipeStream.PipeValueTaskSource.System.Threading.Tasks.Sources.IValueTaskSource.GetResult(short)
    System.IO.Stream.CopyToAsync.__Core|27_0(System.IO.Stream, System.IO.Stream, int, System.Threading.CancellationToken) in Stream.cs
    FFMpegCore.Arguments.InputPipeArgument.ProcessDataAsync(System.Threading.CancellationToken)
    FFMpegCore.Arguments.PipeArgument.During(System.Threading.CancellationToken)
    FFMpegCore.FFMpegArguments.During(System.Threading.CancellationToken)
    FFMpegCore.FFMpegArgumentProcessor.Process(Instances.ProcessArguments, System.Threading.CancellationTokenSource)
    FFMpegCore.FFMpegArgumentProcessor.ProcessAsynchronously(bool, FFMpegCore.FFOptions)


  


  I am trying to replicate the following FFmpeg command and JSON output :

  


  ffmpeg -i "file.flac" -af loudnorm=print_format=json -f null -


  


  {
        "input_i" : "-21.87",
        "input_tp" : "-7.13",
        "input_lra" : "5.00",
        "input_thresh" : "-32.04",
        "output_i" : "-24.76",
        "output_tp" : "-10.36",
        "output_lra" : "4.10",
        "output_thresh" : "-34.84",
        "normalization_type" : "dynamic",
        "target_offset" : "0.76"
}


  


  If I add .ForceFormat("null") to the OutputToPipe options, I do not get the exception but when I read the output stream, it returns an empty string. In the issue mentioned, I know they mentioned a way to get the FFMpegErrorOutput property but I do not know how that can be done. I could not find an example of outputting a stream as JSON. If anyone can point me in the right direction or can provide an alternative solution, I would greatly appreciate it.

  


  Update

  


  I made a change to the StreamPipeSource() method where I copied over the uploaded file to a MemoryStream. With this change, the following FFMpegException is thrown.

  


  FFMpegCore.Exceptions.FFMpegException: 'ffmpeg exited with non-zero exit-code (-22 - ffmpeg version 7.0.1-full_build-www.gyan.dev Copyright (c) 2000-2024 the FFmpeg developers
  built with gcc 13.2.0 (Rev5, Built by MSYS2 project)
  configuration: --enable-gpl --enable-version3 --enable-static --disable-w32threads --disable-autodetect --enable-fontconfig --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-bzlib --enable-lzma --enable-libsnappy --enable-zlib --enable-librist --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24 --enable-libaribcaption --enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libxevd --enable-libzvbi --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxeve --enable-libxvid --enable-libaom --enable-libjxl --enable-libopenjpeg --enable-libvpx --enable-mediafoundation --enable-libass --enable-frei0r --enable-libfreetype --enable-libfribidi --enable-libharfbuzz --enable-liblensfun --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf --enable-cuda-llvm --enable-cuvid --enable-dxva2 --enable-d3d11va --enable-d3d12va --enable-ffnvcodec --enable-libvpl --enable-nvdec --enable-nvenc --enable-vaapi --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl --enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc --enable-libcodec2 --enable-libilbc --enable-libgsm --enable-libopencore-amrnb --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa --enable-libbs2b --enable-libflite --enable-libmysofa --enable-librubberband --enable-libsoxr --enable-chromaprint
  libavutil      59.  8.100 / 59.  8.100
  libavcodec     61.  3.100 / 61.  3.100
  libavformat    61.  1.100 / 61.  1.100
  libavdevice    61.  1.100 / 61.  1.100
  libavfilter    10.  1.100 / 10.  1.100
  libswscale      8.  1.100 /  8.  1.100
  libswresample   5.  1.100 /  5.  1.100
  libpostproc    58.  1.100 / 58.  1.100
[in#0 @ 000001bda86c67c0] Error opening input: Invalid argument
Error opening input file \\.\pipe\FFMpegCore_c6e5c.
Error opening input files: Invalid argument)'


  


• "Error opening input" error when running ffmpeg via shell script

  15 octobre 2024, par Roni Yaniv

  I'm on a macbook running sonoma 14.7.

  


  I have the following ffmpeg command which runs just fine by itself in the same folder of the files I need to modify :

  


  ffmpeg -i "water-stream-90fps.mp4" -vf "drawtext=text='Frame\: %{frame_num}': start_number=1: x=(w-text_w): y=(h-text_h):fontsize=(h*10/100):fontcolor=yellow,drawtext=text='%{pts\:hms}':x=0:y=0:fontsize=(h*10/100):fontcolor=yellow" "water-stream-90fps-with-markers.mp4"

  


  However, when I try to use it in a shell script by running ./add_markers.sh in the same folder, I get an error.

  


  This is the add_markers.sh script :

  


  #!/bin/bash

# Replace '/path/to/your/folder' with the actual path to your folder
folder=$(pwd)

# Replace 'ffmpeg -i input.mp4 -vf scale=640:480 output.mp4' with your desired FFmpeg command
ffmpeg_command="ffmpeg -i input.mp4 -vf \"drawtext=text='Frame\: %{frame_num}': start_number=1: x=(w-text_w): y=(h-text_h):fontsize=(h*10/100):fontcolor=yellow,drawtext=text='%{pts\:hms}':x=0:y=0:fontsize=(h*10/100):fontcolor=yellow\" output.mp4"

echo "$ffmpeg_command"

# Loop through all files in the folder and execute the FFmpeg command

for file in "$folder"/*; do
    filename=$(basename "${file%.*}") #get only the first part of the file name without path or extension

    # Replace 'input.mp4' with the current filename and 'output.mp4' with the new filename. 
    # Added double quotes to manage filenames with spaces.
    new_command="${ffmpeg_command//input.mp4/\"$filename.mp4\"}"
    new_command="${new_command//output.mp4/\"$filename-with-markers.mp4\"}"

    echo "Running $new_command"

    $new_command

done


  


  This is the error I get (for one of the files, same error for all of them) :

  


  Running ffmpeg -i "water-stream-90fps.mp4" -vf "drawtext=text='Frame\: %{frame_num}': start_number=1: x=(w-text_w): y=(h-text_h):fontsize=(h*10/100):fontcolor=yellow,drawtext=text='%{pts\:hms}':x=0:y=0:fontsize=(h*10/100):fontcolor=yellow" "water-stream-90fps-with-markers.mp4"
ffmpeg version 7.0 Copyright (c) 2000-2024 the FFmpeg developers
  built with Apple clang version 15.0.0 (clang-1500.3.9.4)
  configuration: --prefix=/opt/homebrew/Cellar/ffmpeg/7.0 --enable-shared --enable-pthreads --enable-version3 --cc=clang --host-cflags= --host-ldflags='-Wl,-ld_classic' --enable-ffplay --enable-gnutls --enable-gpl --enable-libaom --enable-libaribb24 --enable-libbluray --enable-libdav1d --enable-libharfbuzz --enable-libjxl --enable-libmp3lame --enable-libopus --enable-librav1e --enable-librist --enable-librubberband --enable-libsnappy --enable-libsrt --enable-libssh --enable-libsvtav1 --enable-libtesseract --enable-libtheora --enable-libvidstab --enable-libvmaf --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopenvino --enable-libspeex --enable-libsoxr --enable-libzmq --enable-libzimg --disable-libjack --disable-indev=jack --enable-videotoolbox --enable-audiotoolbox --enable-neon
  libavutil      59.  8.100 / 59.  8.100
  libavcodec     61.  3.100 / 61.  3.100
  libavformat    61.  1.100 / 61.  1.100
  libavdevice    61.  1.100 / 61.  1.100
  libavfilter    10.  1.100 / 10.  1.100
  libswscale      8.  1.100 /  8.  1.100
  libswresample   5.  1.100 /  5.  1.100
  libpostproc    58.  1.100 / 58.  1.100
[in#0 @ 0x6000015bc300] Error opening input: No such file or directory
Error opening input file "water-stream-90fps.mp4".
Error opening input files: No such file or directory


  


  I tried all kinds of things but my brain is starting to swell. Any guidance/help would be appreciated.