Recherche avancée

Sur d’autres sites (4008)

• Receive rtp (opus) stream from ffmpeg on other computer with VLC

  27 juin 2015, par Friendlyghost89

  I am currently trying to get an opus stream to play on a separate computer using VLC.

  Currently the setup is as follows :

  Odroid-U2 running ffmpeg to capture audio and send as rtp opus stream to remote computer....
  command used : ffmpeg -f alsa -ac 1 -i hw:0 -acodec libopus -ab 32k -ac 1 -f rtp rtp ://192.168.0.115:2032

  the remote computer (on same local network) is at 192.168.0.115
  the Odroid is at 192.168.0.124

  If i use libmp3lame in libopus’s place then the stream will run through without a problem and will not prompt the fact that it requires sdp....

  VLC output on remote computer :

  SDP required: A description in SDP format is required to receive the RTP stream. Note that rtp:// URIs cannot work with dynamic RTP payload format (97).

  If i use an *.sdp file that I drop into vlc to play the stream it does nothing (no errors and no playback)

  SDP file used :

      SDP:
  
      v=0
  
      o=- 0 0 IN IP4 127.0.0.1
  
      s=No Name
  
      c=IN IP4 192.168.0.115
  
      t=0 0
  
      a=tool:libavformat 55.2.100
  
      m=audio 2032 RTP/AVP 97
  
      b=AS:32
  
      a=rtpmap:97 opus/48000

  ffmpeg output on Odroid :

      linaro@linaro-ubuntu-desktop:~$ ffmpeg -f alsa -ac 1 -i hw:0 -acodec libopus -ab 32k -ac 1         -f rtp rtp://192.168.0.115:2032
  
      ffmpeg version git-2013-04-13-87dd62e Copyright (c) 2000-2013 the FFmpeg developers
  
        built on Apr 13 2013 09:47:34 with gcc 4.6 (Ubuntu/Linaro 4.6.3-1ubuntu5)
  
        configuration: --enable-gpl --enable-libmp3lame --enable-libopencore-amrnb --enable-        libopencore-amrwb --enable-libspeex --enable-librtmp --enable-libtheora --enable-libvorbis         --enable-libvpx --enable-x11grab --enable-libx264 --enable-nonfree --enable-version3         --enable-libopus
  
        libavutil      52. 26.100 / 52. 26.100
  
        libavcodec     55.  2.100 / 55.  2.100
  
        libavformat    55.  2.100 / 55.  2.100
  
        libavdevice    55.  0.100 / 55.  0.100
  
        libavfilter     3. 53.101 /  3. 53.101
  
        libswscale      2.  2.100 /  2.  2.100
  
        libswresample   0. 17.102 /  0. 17.102
  
        libpostproc    52.  3.100 / 52.  3.100
  
      Guessed Channel Layout for  Input Stream #0.0 : mono
  
      Input #0, alsa, from 'hw:0':
  
        Duration: N/A, start: 1365868129.196234, bitrate: 768 kb/s
  
          Stream #0:0: Audio: pcm_s16le, 48000 Hz, mono, s16, 768 kb/s
  
      Output #0, rtp, to 'rtp://192.168.0.115:2032':
  
        Metadata:
  
          encoder         : Lavf55.2.100
  
          Stream #0:0: Audio: opus, 48000 Hz, mono, s16, 32 kb/s
  
      Stream mapping:
  
        Stream #0:0 -> #0:0 (pcm_s16le -> libopus)
  
      SDP:
  
      v=0
  
      o=- 0 0 IN IP4 127.0.0.1
  
      s=No Name
  
      c=IN IP4 192.168.0.115
  
      t=0 0
  
      a=tool:libavformat 55.2.100
  
      m=audio 2032 RTP/AVP 97
  
      b=AS:32
  
      a=rtpmap:97 opus/48000

  Any help is greatly appreciated....

  Regards

• ffmpeg decoding yuv420p to rgb shifts luminance/brightness down

  6 avril 2013, par glopes

  I'm recording video from a grayscale camera into an MPEG4 video file using FFMPEG. Recently I noticed a weird effect : if I playback the file using FFMPEG or windows media player, the output frames are noticeably darker (by about 10 brightness values) than the original source.

  I thought the encoding step was doing this until I opened the same file in VLC and it gave me back the correct result. I played around with FFMPEG command lines to decode a single frame and realized that if I decode a frame into GRAY8 pixel format, the brightness/luminance values are preserved. Here's the command and ffmpeg output :

  ffmpeg -ss 0.5 -i video.avi -vframes 1 -t 1 -s 1280x680 -pix_fmt gray gray.bmp
  
  
  
  ffmpeg version 1.2 Copyright (c) 2000-2013 the FFmpeg developers
  
    built on Apr  4 2013 12:40:58 with gcc 4.6.2 (GCC)
  
    configuration: --enable-w32threads
  
    libavutil      52. 18.100 / 52. 18.100
  
    libavcodec     54. 92.100 / 54. 92.100
  
    libavformat    54. 63.104 / 54. 63.104
  
    libavdevice    54.  3.103 / 54.  3.103
  
    libavfilter     3. 42.103 /  3. 42.103
  
    libswscale      2.  2.100 /  2.  2.100
  
    libswresample   0. 17.102 /  0. 17.102
  
  Input #0, avi, from 'video.avi':
  
    Metadata:
  
      encoder         : Lavf53.32.100
  
    Duration: 00:00:07.47, start: 0.000000, bitrate: 16532 kb/s
  
      Stream #0:0: Video: mpeg4 (Simple Profile) (FMP4 / 0x34504D46), yuv420p, 128
  
  0x720 [SAR 1:1 DAR 16:9], 30 tbr, 30 tbn, 30 tbc
  
  Output #0, image2, to 'gray.bmp':
  
    Metadata:
  
      encoder         : Lavf54.63.104
  
      Stream #0:0: Video: bmp, gray, 1280x680 [SAR 17:18 DAR 16:9], q=2-31, 200 kb
  
  /s, 90k tbn, 30 tbc
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (mpeg4 -> bmp)
  
  Press [q] to stop, [?] for help
  
  frame=    1 fps=0.0 q=0.0 Lsize=N/A time=00:00:00.03 bitrate=N/A
  
  video:851kB audio:0kB subtitle:0 global headers:0kB muxing overhead -100.002524%

  However, if I decode the same frame into an rgb color pixel format, I end up again with the darker frames :

  ffmpeg -ss 0.5 -i video.avi -vframes 1 -t 1 -s 1280x680 -pix_fmt bgr24 rgb.bmp
  
  
  
  ffmpeg version 1.2 Copyright (c) 2000-2013 the FFmpeg developers
  
    built on Apr  4 2013 12:40:58 with gcc 4.6.2 (GCC)
  
    configuration: --enable-w32threads
  
    libavutil      52. 18.100 / 52. 18.100
  
    libavcodec     54. 92.100 / 54. 92.100
  
    libavformat    54. 63.104 / 54. 63.104
  
    libavdevice    54.  3.103 / 54.  3.103
  
    libavfilter     3. 42.103 /  3. 42.103
  
    libswscale      2.  2.100 /  2.  2.100
  
    libswresample   0. 17.102 /  0. 17.102
  
  Input #0, avi, from 'video.avi':
  
    Metadata:
  
      encoder         : Lavf53.32.100
  
    Duration: 00:00:07.47, start: 0.000000, bitrate: 16532 kb/s
  
      Stream #0:0: Video: mpeg4 (Simple Profile) (FMP4 / 0x34504D46), yuv420p, 128
  
  0x720 [SAR 1:1 DAR 16:9], 30 tbr, 30 tbn, 30 tbc
  
  Output #0, image2, to 'rgb.bmp':
  
    Metadata:
  
      encoder         : Lavf54.63.104
  
      Stream #0:0: Video: bmp, bgr24, 1280x680 [SAR 17:18 DAR 16:9], q=2-31, 200 k
  
  b/s, 90k tbn, 30 tbc
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (mpeg4 -> bmp)
  
  Press [q] to stop, [?] for help
  
  frame=    1 fps=0.0 q=0.0 Lsize=N/A time=00:00:00.03 bitrate=N/A
  
  video:2550kB audio:0kB subtitle:0 global headers:0kB muxing overhead -100.000843%

  This happens with every single grayscale video that I encode to MPEG4 with FFMPEG. My best guess so far is it has to do with how the container pixel format gets converted to/from. Since I'm using MPEG4, the file pixel format is YUV420P. I have no idea how ffmpeg encodes from GRAY8 to YUV420P, but maybe it stores just the luminance values in Y... if this happens, then decoding from this to RGB could produce darker pixels by the scaling factor that is applied to the luminance matrix ?

  To sum it up :

  1) How can encoding a grayscale video to YUV420P with FFMPEG and decoding back produce wrong (darker) brightness values when decoding to RGB versus GRAY8 ? Presumably once the frames are in YUV420P format it shouldn't matter whether the source is actually grayscale or not so the result should be equivalent, no ?

  2) How does VLC avoid this situation ? I was under the impression that VLC used FFMPEG as well for video decoding, but somehow they managed to figure out how to produce the correct values without requiring me to indicate explicitly that the video was grayscale.

• convert h.264 avi container to mp4 with ffmpeg

  31 août 2014, par Tom

  I’d like to convert my h.264 avi container to a mp4 container with ffmpeg. I’ve found this works :

  ./ffmpeg -i myfile.avi -vcodec copy myfile.mp4
  
  ffmpeg version N-51169-gcedf276 Copyright (c) 2000-2013 the FFmpeg developers
  
    built on Mar 21 2013 05:12:00 with gcc 4.6 (Debian 4.6.3-1)
  
    configuration: --prefix=/root/ffmpeg-static/32bit --arch=x86_32 --extra-cflags='-m32 -I/root/ffmpeg-static/32bit/include -static' --extra-ldflags='-m32 -L/root/ffmpeg-static/32bit/lib -static' --extra-libs='-lxml2 -lexpat -lfreetype' --enable-static --disable-shared --disable-ffserver --disable-doc --enable-bzlib --enable-zlib --enable-postproc --enable-runtime-cpudetect --enable-libx264 --enable-gpl --enable-libtheora --enable-libvorbis --enable-libmp3lame --enable-gray --enable-libass --enable-libfreetype --enable-libopenjpeg --enable-libspeex --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-version3 --enable-libvpx
  
    libavutil      52. 22.100 / 52. 22.100
  
    libavcodec     55.  1.100 / 55.  1.100
  
    libavformat    55.  0.100 / 55.  0.100
  
    libavdevice    55.  0.100 / 55.  0.100
  
    libavfilter     3. 48.100 /  3. 48.100
  
    libswscale      2.  2.100 /  2.  2.100
  
    libswresample   0. 17.102 /  0. 17.102
  
    libpostproc    52.  2.100 / 52.  2.100
  
  [avi @ 0x9fff660] non-interleaved AVI
  
  Guessed Channel Layout for  Input Stream #0.1 : mono
  
  Input #0, avi, from 'myfile.avi':
  
    Metadata:
  
      encoder         : Lavf52.64.2
  
    Duration: 00:00:10.40, start: 0.000000, bitrate: 409 kb/s
  
      Stream #0:0: Video: h264 (Baseline) (H264 / 0x34363248), yuvj420p, 640x480, 10 fps, 10 tbr, 10 tbn, 30 tbc
  
      Stream #0:1: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 8000 Hz, mono, s16, 128 kb/s
  
  Output #0, mp4, to 'myfile.mp4':
  
    Metadata:
  
      encoder         : Lavf55.0.100
  
      Stream #0:0: Video: h264 ([33][0][0][0] / 0x0021), yuvj420p, 640x480, q=2-31, 10 fps, 10240 tbn, 10 tbc
  
      Stream #0:1: Audio: aac ([64][0][0][0] / 0x0040), 8000 Hz, mono, s16, 128 kb/s
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (copy)
  
    Stream #0:1 -> #0:1 (pcm_s16le -> libvo_aacenc)
  
  Press [q] to stop, [?] for help
  
  [mp4 @ 0xa006ea0] pts has no value
  
      Last message repeated 100 times
  
  frame=  101 fps=0.0 q=-1.0 Lsize=     350kB time=00:00:11.06 bitrate= 259.3kbits/s
  
  video:332kB audio:15kB subtitle:0 global headers:0kB muxing overhead 0.926809%

  This generates a file that I can play with the HTML5 video player but for legacy browsers I’d like to use a flash player (Flowplayer). The file doesn’t play with Flowplayer, in fact it causes it to crash.

  However if I use :

  ./ffmpeg -i myfile.avi myfile2.mp4
  
  ffmpeg version N-51169-gcedf276 Copyright (c) 2000-2013 the FFmpeg developers
  
    built on Mar 21 2013 05:12:00 with gcc 4.6 (Debian 4.6.3-1)
  
    configuration: --prefix=/root/ffmpeg-static/32bit --arch=x86_32 --extra-cflags='-m32 -I/root/ffmpeg-static/32bit/include -static' --extra-ldflags='-m32 -L/root/ffmpeg-static/32bit/lib -static' --extra-libs='-lxml2 -lexpat -lfreetype' --enable-static --disable-shared --disable-ffserver --disable-doc --enable-bzlib --enable-zlib --enable-postproc --enable-runtime-cpudetect --enable-libx264 --enable-gpl --enable-libtheora --enable-libvorbis --enable-libmp3lame --enable-gray --enable-libass --enable-libfreetype --enable-libopenjpeg --enable-libspeex --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-version3 --enable-libvpx
  
    libavutil      52. 22.100 / 52. 22.100
  
    libavcodec     55.  1.100 / 55.  1.100
  
    libavformat    55.  0.100 / 55.  0.100
  
    libavdevice    55.  0.100 / 55.  0.100
  
    libavfilter     3. 48.100 /  3. 48.100
  
    libswscale      2.  2.100 /  2.  2.100
  
    libswresample   0. 17.102 /  0. 17.102
  
    libpostproc    52.  2.100 / 52.  2.100
  
  [avi @ 0x9b02660] non-interleaved AVI
  
  Guessed Channel Layout for  Input Stream #0.1 : mono
  
  Input #0, avi, from 'myfile.avi':
  
    Metadata:
  
      encoder         : Lavf52.64.2
  
    Duration: 00:00:10.40, start: 0.000000, bitrate: 409 kb/s
  
      Stream #0:0: Video: h264 (Baseline) (H264 / 0x34363248), yuvj420p, 640x480, 10 fps, 10 tbr, 10 tbn, 30 tbc
  
      Stream #0:1: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 8000 Hz, mono, s16, 128 kb/s
  
  No pixel format specified, yuvj420p for H.264 encoding chosen.
  
  Use -pix_fmt yuv420p for compatibility with outdated media players.
  
  [libx264 @ 0x9b065a0] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.1 Cache64
  
  [libx264 @ 0x9b065a0] profile High, level 2.2
  
  [libx264 @ 0x9b065a0] 264 - core 129 r2230 1cffe9f - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=1 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=10 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
  Output #0, mp4, to 'myfile2.mp4':
  
    Metadata:
  
      encoder         : Lavf55.0.100
  
      Stream #0:0: Video: h264 ([33][0][0][0] / 0x0021), yuvj420p, 640x480, q=-1--1, 10240 tbn, 10 tbc
  
      Stream #0:1: Audio: aac ([64][0][0][0] / 0x0040), 8000 Hz, mono, s16, 128 kb/s
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (h264 -> libx264)
  
    Stream #0:1 -> #0:1 (pcm_s16le -> libvo_aacenc)
  
  Press [q] to stop, [?] for help
  
  frame=   47 fps=0.0 q=25.0 size=      21kB time=00:00:04.40 bitrate=  39.9kbits/s dup=3 dropframe=   59 fps= 56 q=25.0 size=      56kB time=00:00:05.68 bitrate=  80.2kbits/s dup=3 dropframe=   71 fps= 45 q=25.0 size=      89kB time=00:00:06.84 bitrate= 106.9kbits/s dup=3 dropframe=   83 fps= 40 q=25.0 size=     124kB time=00:00:08.12 bitrate= 124.9kbits/s dup=3 dropframe=   94 fps= 36 q=25.0 size=     157kB time=00:00:09.14 bitrate= 140.4kbits/s dup=4 dropframe=  105 fps= 23 q=25.0 Lsize=     309kB time=00:00:11.06 bitrate= 228.8kbits/s dup=4 drop=0
  
  video:291kB audio:15kB subtitle:0 global headers:0kB muxing overhead 1.108651%
  
  [libx264 @ 0x9b065a0] frame I:1     Avg QP:17.65  size: 12772
  
  [libx264 @ 0x9b065a0] frame P:94    Avg QP:19.46  size:  2868
  
  [libx264 @ 0x9b065a0] frame B:10    Avg QP:21.58  size:  1464
  
  [libx264 @ 0x9b065a0] consecutive B-frames: 82.9% 13.3%  0.0%  3.8%
  
  [libx264 @ 0x9b065a0] mb I  I16..4: 16.6% 66.3% 17.1%
  
  [libx264 @ 0x9b065a0] mb P  I16..4:  4.2%  6.3%  0.5%  P16..4: 27.0%  9.5%  5.1%  0.0%  0.0%    skip:47.4%
  
  [libx264 @ 0x9b065a0] mb B  I16..4:  0.8%  1.0%  0.0%  B16..8: 39.1%  4.6%  0.5%  direct: 2.4%  skip:51.7%  L0:39.8% L1:56.4% BI: 3.9%
  
  [libx264 @ 0x9b065a0] 8x8 transform intra:58.0% inter:74.7%
  
  [libx264 @ 0x9b065a0] coded y,uvDC,uvAC intra: 47.3% 0.0% 0.0% inter: 16.6% 0.0% 0.0%
  
  [libx264 @ 0x9b065a0] i16 v,h,dc,p: 29% 19% 10% 42%
  
  [libx264 @ 0x9b065a0] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 31% 21% 29%  2%  3%  4%  4%  3%  3%
  
  [libx264 @ 0x9b065a0] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 39% 28% 18%  2%  3%  3%  3%  2%  2%
  
  [libx264 @ 0x9b065a0] i8c dc,h,v,p: 100%  0%  0%  0%
  
  [libx264 @ 0x9b065a0] Weighted P-Frames: Y:5.3% UV:0.0%
  
  [libx264 @ 0x9b065a0] ref P L0: 67.9% 12.0% 12.6%  6.8%  0.6%
  
  [libx264 @ 0x9b065a0] ref B L0: 76.9% 23.1%
  
  [libx264 @ 0x9b065a0] ref B L1: 99.7%  0.3%
  
  [libx264 @ 0x9b065a0] kb/s:226.31

  This works great. But the timing is quite different not to mention CPU cycles. The first command is measured in milli-secs while the second can take quite some time ( 5-40secs).

  Is there another way I can convert the avi to a mp4 container quickly ? Ideally by re-muxing as opposed to re-encoding.

  EDIT

  I’m using this right now which I find to be the fastest for re-encoding. But again I’d rather not do this. I just want to re-mux the code.

  ffmpeg -loglevel quiet -i myfile.avi -vcodec libx264 -profile:v baseline -preset ultrafast myfile.mp4