Recherche avancée

Sur d’autres sites (4742)

• FFmpeg stops encoding when log file reaches 388 kB

  30 janvier 2018, par Rune Aspvik

  I’m using ffmpeg in a node application with this command :

  ffmpeg -seekable 0 -i http://127.0.0.1:8100/Mjpeg/1?authToken=xxx -video_size 1280x720 -r 30 -pix_fmt yuv420p -y D:\Video\pflyers\test.mp4

  The encoding would stop after 28:53 every time. After some reading I figured I had to spawn the child instead of exec because of the large sterr output.

  Before doing that I wanted to see if that was in fact the issue so I tried doing :

  -nostats -hide_banner -loglevel panic

  to avoid the large output to sterr. FFmpeg still stopped after 28:53. Further I tried to write the sterr to log.txt instead of using the above code. I did so adding this to the end :

  2> log.txt

  Still it would stop at 28:53.

  Finally I tried running the command in cmd.exe resulting in the encoding stopping at 29:14.

  What I realized comparing the outputs from ffmpeg run from node and run from cmd.exe was that the encoding stopped when the log.txt reached 388kB.

  How can I fix this ?

  Here’s the full output :

  C:\Users\VossVind>ffmpeg -seekable 0 -i http://127.0.0.1:8100/Mjpeg/1?authToken=xxx -video_size 1280x720 -r 30 -pix_fmt yuv420p -y D:\Video\pflyers\test.mp4
  
  ffmpeg version 3.4 Copyright (c) 2000-2017 the FFmpeg developers
  
    built with gcc 7.2.0 (GCC)
  
    configuration: --enable-gpl --enable-version3 --enable-sdl2 --enable-bzlib --enable-fontconfig --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libfreetype --enable-libmp3lame --enable-libopenjpeg --enable-libopus --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libtheora --enable-libtwolame --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libzimg --enable-lzma --enable-zlib --enable-gmp --enable-libvidstab --enable-libvorbis --enable-cuda --enable-cuvid --enable-d3d11va --enable-nvenc --enable-dxva2 --enable-avisynth --enable-libmfx
  
    libavutil      55. 78.100 / 55. 78.100
  
    libavcodec     57.107.100 / 57.107.100
  
    libavformat    57. 83.100 / 57. 83.100
  
    libavdevice    57. 10.100 / 57. 10.100
  
    libavfilter     6.107.100 /  6.107.100
  
    libswscale      4.  8.100 /  4.  8.100
  
    libswresample   2.  9.100 /  2.  9.100
  
    libpostproc    54.  7.100 / 54.  7.100
  
  Input #0, mpjpeg, from 'http://127.0.0.1:8100/Mjpeg/1?authToken=xxx':
  
    Duration: N/A, bitrate: N/A
  
      Stream #0:0: Video: mjpeg, yuvj420p(pc, bt470bg/unknown/unknown), 1280x720 [SAR 96:96 DAR 16:9], 25 tbr, 25 tbn, 25 tbc
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (mjpeg (native) -> h264 (libx264))
  
  Press [q] to stop, [?] for help
  
  [swscaler @ 0000019639b27fc0] deprecated pixel format used, make sure you did set range correctly
  
  [libx264 @ 0000019639944040] using SAR=1/1
  
  [libx264 @ 0000019639944040] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2
  
  [libx264 @ 0000019639944040] profile High, level 3.1
  
  [libx264 @ 0000019639944040] 264 - core 152 r2851 ba24899 - H.264/MPEG-4 AVC codec - Copyleft 2003-2017 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=18 lookahead_threads=3 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
  Output #0, mp4, to 'D:\Video\pflyers\test.mp4':
  
    Metadata:
  
      encoder         : Lavf57.83.100
  
      Stream #0:0: Video: h264 (libx264) (avc1 / 0x31637661), yuv420p, 1280x720 [SAR 1:1 DAR 16:9], q=-1--1, 30 fps, 15360 tbn, 30 tbc
  
      Metadata:
  
        encoder         : Lavc57.107.100 libx264
  
      Side data:
  
        cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
  
  More than 1000 frames duplicated  114432kB time=00:03:17.80 bitrate=4739.3kbits/s dup=1000 drop=0 speed=0.95x
  
  frame=52544 fps= 29 q=-1.0 Lsize= 1050136kB time=00:29:11.36 bitrate=4912.0kbits/s dup=8757 drop=0 speed=0.972x
  
  video:1049508kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.059803%
  
  [libx264 @ 0000019639944040] frame I:261   Avg QP:20.59  size: 51862
  
  [libx264 @ 0000019639944040] frame P:15400 Avg QP:23.72  size: 33007
  
  [libx264 @ 0000019639944040] frame B:36883 Avg QP:24.55  size: 14989
  
  [libx264 @ 0000019639944040] consecutive B-frames:  0.9% 15.8%  2.5% 80.8%
  
  [libx264 @ 0000019639944040] mb I  I16..4: 17.1% 82.1%  0.8%
  
  [libx264 @ 0000019639944040] mb P  I16..4:  4.3% 48.4%  0.2%  P16..4: 12.3%  7.5%  4.8%  0.0%  0.0%    skip:22.5%
  
  [libx264 @ 0000019639944040] mb B  I16..4:  2.7% 15.6%  0.0%  B16..8: 22.3%  7.0%  1.8%  direct: 3.8%  skip:46.8%  L0:52.3% L1:34.0% BI:13.8%
  
  [libx264 @ 0000019639944040] 8x8 transform intra:88.6% inter:92.9%
  
  [libx264 @ 0000019639944040] coded y,uvDC,uvAC intra: 59.4% 33.6% 2.6% inter: 19.3% 10.9% 0.6%
  
  [libx264 @ 0000019639944040] i16 v,h,dc,p: 57% 30% 12%  1%
  
  [libx264 @ 0000019639944040] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 25% 18% 45%  2%  1%  1%  2%  2%  3%
  
  [libx264 @ 0000019639944040] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 52% 24% 12%  2%  2%  2%  2%  2%  2%
  
  [libx264 @ 0000019639944040] i8c dc,h,v,p: 63% 17% 20%  1%
  
  [libx264 @ 0000019639944040] Weighted P-Frames: Y:0.0% UV:0.0%
  
  [libx264 @ 0000019639944040] ref P L0: 43.8%  7.5% 29.1% 19.6%
  
  [libx264 @ 0000019639944040] ref B L0: 71.8% 21.2%  7.0%
  
  [libx264 @ 0000019639944040] ref B L1: 93.9%  6.1%
  
  [libx264 @ 0000019639944040] kb/s:4908.78

• Bad output from ffmpeg running on raw video from Wear OS device

  17 juin 2020, par lcj

  I am following these instructions regarding capturing and converting video from a Wear OS device, and I am running into problems. I get a video and I can tell it is my screen but it seems to be warped. This should be a green check with some white text.

  



  

  



  There is a lot of noise when I run this :

  



  ffmpeg -f rawvideo -vcodec rawvideo -s 400x400 -pix_fmt rgb24 -r 10 -i video.raw -an -c:v libx264 -pix_fmt yuv420p video.mp4


  



  Here

  



  ffmpeg version 4.3 Copyright (c) 2000-2020 the FFmpeg developers
  built with Apple clang version 11.0.3 (clang-1103.0.32.62)
  configuration: --prefix=/usr/local/Cellar/ffmpeg/4.3 --enable-shared --enable-pthreads --enable-version3 --enable-avresample --cc=clang --host-cflags= --host-ldflags= --enable-ffplay --enable-gnutls --enable-gpl --enable-libaom --enable-libbluray --enable-libdav1d --enable-libmp3lame --enable-libopus --enable-librubberband --enable-libsnappy --enable-libsrt --enable-libtesseract --enable-libtheora --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librtmp --enable-libspeex --enable-libsoxr --enable-videotoolbox --disable-libjack --disable-indev=jack
  libavutil      56. 51.100 / 56. 51.100
  libavcodec     58. 91.100 / 58. 91.100
  libavformat    58. 45.100 / 58. 45.100
  libavdevice    58. 10.100 / 58. 10.100
  libavfilter     7. 85.100 /  7. 85.100
  libavresample   4.  0.  0 /  4.  0.  0
  libswscale      5.  7.100 /  5.  7.100
  libswresample   3.  7.100 /  3.  7.100
  libpostproc    55.  7.100 / 55.  7.100
[rawvideo @ 0x7fbcec008200] Estimating duration from bitrate, this may be inaccurate
Input #0, rawvideo, from 'video.raw':
  Duration: 00:00:07.00, start: 0.000000, bitrate: 38566 kb/s
    Stream #0:0: Video: rawvideo (RGB[24] / 0x18424752), rgb24, 400x400, 38400 kb/s, 10 tbr, 10 tbn, 10 tbc
Stream mapping:
  Stream #0:0 -> #0:0 (rawvideo (native) -> h264 (libx264))
Press [q] to stop, [?] for help
[libx264 @ 0x7fbce980d400] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
[libx264 @ 0x7fbce980d400] profile High, level 2.1, 4:2:0, 8-bit
[libx264 @ 0x7fbce980d400] 264 - core 159 r2999 296494a - H.264/MPEG-4 AVC codec - Copyleft 2003-2020 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=10 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to 'video.mp4':
  Metadata:
    encoder         : Lavf58.45.100
    Stream #0:0: Video: h264 (libx264) (avc1 / 0x31637661), yuv420p, 400x400, q=-1--1, 10 fps, 10240 tbn, 10 tbc
    Metadata:
      encoder         : Lavc58.91.100 libx264
    Side data:
      cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: N/A
[rawvideo @ 0x7fbcec008200] Packet corrupt (stream = 0, dts = 70).
video.raw: corrupt input packet in stream 0
[rawvideo @ 0x7fbce980c800] Invalid buffer size, packet size 145920 < expected frame_size 480000
Error while decoding stream #0:0: Invalid argument
frame=   70 fps=0.0 q=-1.0 Lsize=      90kB time=00:00:06.70 bitrate= 110.3kbits/s speed=46.5x    
video:89kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 1.788509%
[libx264 @ 0x7fbce980d400] frame I:4     Avg QP:15.11  size:  8077
[libx264 @ 0x7fbce980d400] frame P:26    Avg QP:12.39  size:  2159
[libx264 @ 0x7fbce980d400] frame B:40    Avg QP: 9.83  size:    40
[libx264 @ 0x7fbce980d400] consecutive B-frames: 21.4%  5.7%  4.3% 68.6%
[libx264 @ 0x7fbce980d400] mb I  I16..4: 53.0%  3.3% 43.6%
[libx264 @ 0x7fbce980d400] mb P  I16..4:  9.2%  2.0% 11.1%  P16..4:  2.4%  1.3%  0.3%  0.0%  0.0%    skip:73.7%
[libx264 @ 0x7fbce980d400] mb B  I16..4:  0.0%  0.0%  0.0%  B16..8:  1.5%  0.0%  0.0%  direct: 0.1%  skip:98.4%  L0:24.1% L1:75.9% BI: 0.0%
[libx264 @ 0x7fbce980d400] 8x8 transform intra:6.5% inter:9.8%
[libx264 @ 0x7fbce980d400] coded y,uvDC,uvAC intra: 26.1% 44.1% 43.9% inter: 0.3% 0.8% 0.7%
[libx264 @ 0x7fbce980d400] i16 v,h,dc,p: 89%  5%  5%  0%
[libx264 @ 0x7fbce980d400] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 10% 22% 67%  0%  0%  0%  0%  0%  1%
[libx264 @ 0x7fbce980d400] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 13% 69% 10%  0%  1%  0%  5%  0%  1%
[libx264 @ 0x7fbce980d400] i8c dc,h,v,p: 59% 41%  0%  0%
[libx264 @ 0x7fbce980d400] Weighted P-Frames: Y:30.8% UV:30.8%
[libx264 @ 0x7fbce980d400] ref P L0: 83.0%  3.1% 13.0%  0.5%  0.5%
[libx264 @ 0x7fbce980d400] kb/s:102.92


  



  Any ideas ?

  


• ffmpeg stream input sdp shows warning keyframe missing

  27 mars 2021, par Doua Beri

  I'm using ffmpeg 4.3.2.
I'm trying to forward a stream to a rtmp server having sdp file as input

  


  Opening the sdp file with VLC everything is working great. The same thing happens when I use ffplay

  


  ffplay -i rtp-forwarder.sdp -protocol_whitelist file,udp,rtp


  


  The problem starts when I start streaming to a rtmp server. The audio is good but the video is just a black screen. I event tried to stream to youtube rtmp server but it didn't work.

  


  I'm new to ffmpeg. Let me know if I'm missing something.

  


  I'm using this command

  


  ffmpeg -protocol_whitelist file,crypto,udp,rtp -re -i rtp-forwarder.sdp -c:v libx264 -b:v 3000k -maxrate 3000k -bufsize 6000k -pix_fmt yuv420p -g 50 -c:a aac -b:a 160k -ac 2 -ar 44100 -f flv rtmp://localhost/live/test


  


  The sdp file content is like this

  


  v=0
o=- 0 0 IN IP4 192.168.1.49
s=Pion WebRTC
c=IN IP4 192.168.1.49
t=0 0
m=audio 4000 RTP/AVP 111
a=rtpmap:111 OPUS/48000/2
m=video 4002 RTP/AVP 96
a=rtpmap:96 VP8/90000


  


  Here is a full log

  


    libavutil      56. 51.100 / 56. 51.100
  libavcodec     58. 91.100 / 58. 91.100
  libavformat    58. 45.100 / 58. 45.100
  libavdevice    58. 10.100 / 58. 10.100
  libavfilter     7. 85.100 /  7. 85.100
  libswscale      5.  7.100 /  5.  7.100
  libswresample   3.  7.100 /  3.  7.100
  libpostproc    55.  7.100 / 55.  7.100
[sdp @ 0000015a81ede6c0] Keyframe missing
Input #0, sdp, from 'rtp-forwarder.sdp':
  Metadata:
    title           : Pion WebRTC
  Duration: N/A, start: 0.000000, bitrate: N/A
    Stream #0:0: Audio: opus, 48000 Hz, stereo, fltp
    Stream #0:1: Video: vp8, yuv420p(tv, bt470bg/unknown/unknown), 640x480, 90k tbr, 90k tbn, 90k tbc
Stream mapping:
  Stream #0:1 -> #0:0 (vp8 (native) -> h264 (libx264))
  Stream #0:0 -> #0:1 (opus (native) -> aac (native))
Press [q] to stop, [?] for help
[libx264 @ 0000015a81f9e880] MB rate (108000000) > level limit (16711680) -0.0kbits/s speed=N/A
[libx264 @ 0000015a81f9e880] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
[libx264 @ 0000015a81f9e880] profile High, level 6.2, 4:2:0, 8-bit
[libx264 @ 0000015a81f9e880] 264 - core 161 r3048 b86ae3c - H.264/MPEG-4 AVC codec - Copyleft 2003-2021 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=50 keyint_min=5 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=cbr mbtree=1 bitrate=3000 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 vbv_maxrate=3000 vbv_bufsize=6000 nal_hrd=none filler=0 ip_ratio=1.40 aq=1:1.00
Output #0, flv, to 'rtmp://localhost/live/test':
  Metadata:
    title           : Pion WebRTC
    encoder         : Lavf58.45.100
    Stream #0:0: Video: h264 (libx264) ([7][0][0][0] / 0x0007), yuv420p, 640x480, q=-1--1, 3000 kb/s, 90k fps, 1k tbn, 90k tbc
    Metadata:
      encoder         : Lavc58.91.100 libx264
    Side data:
      cpb: bitrate max/min/avg: 3000000/0/3000000 buffer size: 6000000 vbv_delay: N/A
    Stream #0:1: Audio: aac (LC) ([10][0][0][0] / 0x000A), 44100 Hz, stereo, fltp, 160 kb/s
    Metadata:
      encoder         : Lavc58.91.100 aac
[flv @ 0000015a820dd200] Failed to update header with correct duration..1kbits/s speed=   1x
[flv @ 0000015a820dd200] Failed to update header with correct filesize.
frame=   13 fps=0.1 q=-1.0 Lsize=    4233kB time=00:03:07.12 bitrate= 185.3kbits/s speed=0.999x
video:440kB audio:3658kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 3.281771%
[libx264 @ 0000015a81f9e880] frame I:1     Avg QP: 1.61  size: 59263
[libx264 @ 0000015a81f9e880] frame P:3     Avg QP: 9.10  size: 44500
[libx264 @ 0000015a81f9e880] frame B:9     Avg QP: 9.80  size: 28605
[libx264 @ 0000015a81f9e880] consecutive B-frames:  7.7%  0.0%  0.0% 92.3%
[libx264 @ 0000015a81f9e880] mb I  I16..4: 36.5% 19.5% 44.0%
[libx264 @ 0000015a81f9e880] mb P  I16..4: 10.7% 50.3% 12.3%  P16..4: 11.6%  9.6%  5.5%  0.0%  0.0%    skip: 0.1%
[libx264 @ 0000015a81f9e880] mb B  I16..4:  2.2% 10.4%  3.6%  B16..8: 45.7% 21.2%  6.1%  direct:10.6%  skip: 0.1%  L0:60.0% L1:25.5% BI:14.5%
[libx264 @ 0000015a81f9e880] final ratefactor: 13.03
[libx264 @ 0000015a81f9e880] 8x8 transform intra:56.7% inter:41.9%
[libx264 @ 0000015a81f9e880] coded y,uvDC,uvAC intra: 90.9% 99.6% 98.9% inter: 66.1% 99.0% 93.2%
[libx264 @ 0000015a81f9e880] i16 v,h,dc,p: 23% 22% 18% 38%
[libx264 @ 0000015a81f9e880] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 31% 26% 23%  4%  2%  3%  3%  4%  4%
[libx264 @ 0000015a81f9e880] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 36% 34% 18%  2%  2%  2%  2%  2%  2%
[libx264 @ 0000015a81f9e880] i8c dc,h,v,p: 55% 29% 11%  5%
[libx264 @ 0000015a81f9e880] Weighted P-Frames: Y:0.0% UV:0.0%
[libx264 @ 0000015a81f9e880] ref P L0: 59.2%  5.0% 13.4% 22.4%
[libx264 @ 0000015a81f9e880] ref B L0: 87.1%  7.5%  5.4%
[libx264 @ 0000015a81f9e880] ref B L1: 95.1%  4.9%
[libx264 @ 0000015a81f9e880] kb/s:4028.74
[aac @ 0000015a81f9a880] Qavg: 7535.380


  


  I get this warning [sdp @ 0000015a81ede6c0] Keyframe missing
and this one after a stop it

  


  [flv @ 0000015a820dd200] Failed to update header with correct duration..1kbits/s speed=   1x
[flv @ 0000015a820dd200] Failed to update header with correct filesize.