Recherche avancée

Sur d’autres sites (5401)

• Google Analytics 4 and GDPR : Everything You Need to Know

  17 mai 2022, par Erin

  Four years have passed since the European General Data Protection Regulation (GDPR, also known as DSGVO in German, and RGPD in French) took effect.

  That’s ample time to get compliant, especially for an organisation as big and innovative as Google. Or is it ? 

  If you are wondering how GDPR affects Google Analytics 4 and what the compliance status is at present, here’s the lowdown. 

  Is Google Analytics 4 GDPR Compliant ?

  No. As of mid-2022, Google Analytics 4 (GA4) isn’t fully GDPR compliant. Despite adding extra privacy-focused features, GA4 still has murky status with the European regulators. After the invalidation of the Privacy Shield framework in 2020, Google is yet to regulate EU-US data protection. At present, the company doesn’t sufficiently protect EU citizens’ and residents’ data against US surveillance laws. This is a direct breach of GDPR.

  Google Analytics and GDPR : a Complex Relationship 

  European regulators have scrutinised Google since GDPR came into effect in 2018.

  While the company took steps to prepare for GDPR provisions, it didn’t fully comply with important regulations around user data storage, transfer and security.

  The relationship between Google and EU regulators got more heated after the Court of Justice of the European Union (CJEU) invalidated the Privacy Shield — a leeway Google used for EU-US data transfers. After 2020, GDPR litigation against Google followed. 

  This post summarises the main milestones in this story and explains the consequences for Google Analytics users. 

  

  2018 : Google Analytics Meets GDPR 

  In 2018, the EU adopted the General Data Protection Regulation (GDPR) — a set of privacy and data security laws, covering all member states. Every business interacting with EU citizens and/or residents had to comply.

  GDPR harmonised data protection laws across member states and put down extra provisions for what constitutes sensitive personal information (or PII). Broadly, PII includes any data about the person’s :

  • Racial or ethnic origin 
  • Employment status 
  • Religious or political beliefs
  • State of health 
  • Genetic or biometric data 
  • Financial records (such as payment method data)
  • Address and phone numbers 

  Businesses were barred from collecting this information without explicit consent (and even with it in some cases). If collected, such sensitive information is also subject to strict requirements on how it should be stored, secured, transferred and used. 

  7 Main GDPR Principles Explained 

  Article 5 of the GDPR lays out seven main GDPR principles for personal data and privacy protection : 

  • Lawfulness, fairness and transparency — data must be obtained legally, collected with consent and in adherence to laws. 
  • Purpose limitation — all personal information must be collected for specified, explicit and legal purposes. 
  • Data minimisation — companies must collect only necessary and adequate data, aligned with the stated purpose. 
  • Accuracy — data accuracy must be ensured at all times. Companies must have mechanisms to erase or correct inaccurate data without delays. 
  • Storage limitation — data must be stored only for as long as the stated purpose suggests. Though there’s no upper time limit on data storage. 
  • Integrity and confidentiality (security) — companies must take measures to ensure secure data storage and prevent unlawful or unauthorised access to it. 
  • Accountability — companies must be able to demonstrate adherence to the above principles. 

  Google claimed to have taken steps to make all of their products GDPR compliant ahead of the deadline. But in practice, this wasn’t always the case.

  In March 2018, a group of publishers admonished Google for not providing them with enough tools for GDPR compliance :

  “[Y]ou refuse to provide publishers with any specific information about how you will collect, share and use the data. Placing the full burden of obtaining new consent on the publisher is untenable without providing the publisher with the specific information needed to provide sufficient transparency or to obtain the requisite specific, granular and informed consent under the GDPR.”

  The proposed Google Analytics GDPR consent form was hard to implement and lacked customisation options. In fact, Google “makes unilateral decisions” on how the collected data is stored and used. 

  Users had no way to learn about or control all intended uses of people’s data — which made compliance with the second clause impossible. 

  Unsurprisingly, Google was among the first companies to face a GDPR lawsuit (together with Facebook). 

  By 2019, French data regulator CNIL, successfully argued that Google wasn’t sufficiently disclosing its data collection across products — and hence in breach of GDPR. After a failed appeal, Google had to pay a €50 million fine and promise to do better. 

  2019 : Google Analytics 4 Announcement 

  Throughout 2019, Google rightfully attempted to resolve some of its GDPR shortcomings across all products, Google Universal Analytics (UA) included. 

  They added a more visible consent mechanism for online tracking and provided extra compliance tips for users to follow. In the background, Google also made tech changes to its data processing mechanism to get on the good side of regulations.

  Though Google addressed some of the issues, they missed others. A 2019 independent investigation found that Google real-time-bidding (RTB) ad auctions still used EU citizens’ and residents’ data without consent, thanks to a loophole called “Push Pages”. But they managed to quickly patch this up before the allegations had made it to court. 

  In November 2019, Google released a beta version of the new product version — Google Analytics 4, due to replace Universal Analytics. 

  GA4 came with a set of new privacy-focused features for ticking GDPR boxes such as :

  • Data deletion mechanism. Users can now request to surgically extract certain data from the Analytics servers via a new interface. 
  • Shorter data retention period. You can now shorten the default retention period to 2 months by default (instead of 14 months) or add a custom limit.  
  • IP Anonymisation. GA4 doesn’t log or store IP addresses by default. 

  Google Analytics also updated its data processing terms and made changes to its privacy policy. 

  Though Google made some progress, Google Analytics 4 still has many limitations — and isn’t GDPR compliant. 

  2020 : Privacy Shield Invalidation Ruling 

  As part of the 2018 GDPR preparations, Google named its Irish entity (Google Ireland Limited) as the “data controller” legally responsible for EEA and Swiss users’ information. 

  The company announcement says : 

  

  Initially, Google assumed that this legal change would help them ensure GDPR compliance as “legally speaking” a European entity was set in charge of European data. 

  Practically, however, EEA consumers’ data was still primarily transferred and processed in the US — where most Google data centres are located. Until 2020, such cross-border data transfers were considered legal thanks to the Privacy Shield framework. 

  But in July 2020, The EU Court of Justice ruled that this framework doesn’t provide adequate data protection to digitally transmitted data against US surveillance laws. Hence, companies like Google can no longer use it. The Swiss Federal Data Protection and Information Commissioner (FDPIC) reached the same conclusion in September 2020. 

  The invalidation of the Privacy Shield framework put Google in a tough position.

   Article 14. f of the GDPR explicitly states : 

  “The controller (the company) that intends to carry out a transfer of personal data to a recipient (Analytics solution) in a third country or an international organisation must provide its users with information on the place of processing and storage of its data”.

  Invalidation of the Privacy Shield framework prohibited Google from moving data to the US. At the same time, GDPR provisions mandated that they must disclose proper data location. 

  But Google Analytics (like many other products) had no a mechanism for : 

  • Guaranteeing intra-EU data storage 
  • Selecting a designated regional storage location 
  • Informing users about data storage location or data transfers outside of the EU 

  And these factors made Google Analytics in direct breach of GDPR — a territory, where they remain as of 2022.

  2020-2022 : Google GDPR Breaches and Fines 

  The 2020 ruling opened Google to GDPR lawsuits from country-specific data regulators.

  Google Analytics in particular was under a heavy cease-fire. 

  • Sweden first fined Google for violating GDPR for no not fulfilling its obligations to request data delisting in 2020. 
  • France rejected Google Analytics 4 IP address anonymisation function as a sufficient measure for protecting cross-border data transfers. Even with it, US intelligence services can still access user IPs and other PII. France declared Google Analytics illegal and pressed a €150 million fine. 
  • Austria also found Google Analytics GDPR non-compliant and proclaimed the service as “illegal”. The authority now seeks a fine too. 

  The Dutch Data Protection Authority and  Norwegian Data Protection Authority also found Google Analytics guilty of a GDPR breach and seek to limit Google Analytics usage. 

  New privacy controls in Google Analytics 4 do not resolve the underlying issue — unregulated, non-consensual EU-US data transfer. 

  Google Analytics GDPR non-compliance effectively opens any website tracking or analysing European visitors to legal persecution.

  In fact, this is already happening. noyb, a European privacy-focused NGO, has already filed over 100 lawsuits against European websites using Google Analytics.

  2022 : Privacy Shield 2.0. Negotiations

  Google isn’t the only US company affected by the Privacy Shield framework invalidation. The ruling puts thousands of digital companies at risk of non-compliance.

  To settle the matter, US and EU authorities started “peace talks” in spring 2022.

  European Commission President Ursula von der Leyen said that they are working with the Biden administration on the new agreement that will “enable predictable and trustworthy data flows between the EU and US, safeguarding the privacy and civil liberties.” 

  However, it’s just the beginning of a lengthy negotiation process. The matter is far from being settled and contentious issues remain as we discussed on Twitter (come say hi !).

  

  For one, the US isn’t eager to modify its surveillance laws and is mostly willing to make them “proportional” to those in place in the EU. These modifications may still not satisfy CJEU — which has the power to block the agreement vetting or invalidate it once again. 

  While these matters are getting hashed out, Google Analytics users, collecting data about EU citizens and/or residents, remain on slippery grounds. As long as they use GA4, they can be subject to GDPR-related lawsuits. 

  To Sum It Up 

  • Google Analytics 4 and Google Universal Analytics are not GDPR compliant because of Privacy Shield invalidation in 2020. 
  • French and Austrian data watchdogs named Google Analytics operations “illegal”. Swedish, Dutch and Norwegian authorities also claim it’s in breach of GDPR. 
  • Any website using GA for collecting data about European citizens and/or residents can be taken to court for GDPR violations (which is already happening). 
  • Privacy Shield 2.0 Framework discussions to regulate EU-US data transfers have only begun and may take years. Even if accepted, the new framework(s) may once again be invalidated by local data regulators as has already happened in the past. 

  Time to Get a GDPR Compliant Google Analytics Alternative 

  Retaining 100% data ownership is the optimal path to GDPR compliance.

  By selecting a transparent web analytics solution that offers 100% data ownership, you can rest assured that no “behind the scenes” data collection, processing or transfers take place. 

  Unlike Google Analytics 4, Matomo offers all of the features you need to be GDPR compliant : 

  • Full data anonymisation 
  • Single-purpose data usage 
  • Easy consent and an opt-out mechanism 
  • First-party cookies usage by default 
  • Simple access to collect data 
  • Fast data removals 
  • EU-based data storage for Matomo Cloud (or storage in the country of your choice with Matomo On-Premise)

  Learn about your audiences in a privacy-centred way and protect your business against unnecessary legal exposure. 

  Start your 21-day free trial (no credit card required) to see how fully GDPR-compliant website analytics works ! 

  21 day free trial. No credit card required.

  Your email address
  

  Your website address
  

  Your Analytics subdomain will be .matomo.cloud (change)

  Choose your analytics subdomain
  

  .matomo.cloud

  I hereby accept the terms and conditions and the data processing agreeement (DPA).

  
  Your information will be used to create an account on our cloud service. For more information please consult our privacy policy.
  
  

  » Start improving your websites now

  

• Unveiling GA4 Issues : 8 Questions from a Marketer That GA4 Can’t Answer

  8 janvier 2024, par Alex

  It’s hard to believe, but Universal Analytics had a lifespan of 11 years, from its announcement in March 2012. Despite occasional criticism, this service established standards for the entire web analytics industry. Many metrics and reports became benchmarks for a whole generation of marketers. It truly was an era.

  For instance, a lot of marketers got used to starting each workday by inspecting dashboards and standard traffic reports in the Universal Analytics web interface. There were so, so many of those days. They became so accustomed to Universal Analytics that they would enter reports, manipulate numbers, and play with metrics almost on autopilot, without much thought.

  However, six months have passed since the sunset of Universal Analytics – precisely on July 1, 2023, when Google stopped processing requests for resources using the previous version of Google Analytics. The time when data about visitors and their interactions with the website were more clearly structured within the UA paradigm is now in the past. GA4 has brought a plethora of opportunities to marketers, but along with those opportunities came a series of complexities.

  GA4 issues

  Since its initial announcement in 2020, GA4 has been plagued with errors and inconsistencies. It still has poor and sometimes illogical documentation, numerous restrictions, and peculiar interface solutions. But more importantly, the barrier to entry into web analytics has significantly increased.

  If you diligently follow GA4 updates, read the documentation, and possess skills in working with data (SQL and basic statistics), you probably won’t feel any problems – you know how to set up a convenient and efficient environment for your product and marketing data. But what if you’re not that proficient ? That’s when issues arise.

  In this article, we try to address a series of straightforward questions that less experienced users – marketers, project managers, SEO specialists, and others – want answers to. They have no time to delve into the intricacies of GA4 but seek access to the fundamentals crucial for their functionality.

  Previously, in Universal Analytics, they could quickly and conveniently address their issues. Now, the situation has become, to put it mildly, more complex. We’ve identified 8 such questions for which the current version of GA4 either fails to provide answers or implies that answers would require significant enhancements. So, let’s dive into them one by one.

  Question 1 : What are the most popular traffic sources on my website ?

  Seemingly a straightforward question. What does GA4 tell us ? It responds with a question : “Which traffic source parameter are you interested in ?”

  

  Wait, what ?

  People just want to know which resources bring them the most traffic. Is that really an issue ?

  Unfortunately, yes. In GA4, there are not one, not two, but three traffic source parameters :

  1. Session source.
  2. First User Source – the source of the first session for each user.
  3. Just the source – determined at the event or conversion level.

  If you wanted to open a report and draw conclusions quickly, we have bad news for you. Before you start ranking your traffic sources by popularity, you need to do some mental work on which parameter and in what context you will look. And even when you decide, you’ll need to make a choice in the selection of standard reports : work with the User Acquisition Report or Traffic Acquisition.

  Yes, there is a difference between them : the first uses the First User Source parameter, and the second uses the session source. And you need to figure that out too.

  Question 2 : What is my conversion rate ?

  This question concerns everyone, and it should be simple, implying a straightforward answer. But no.

  

  In GA4, there are three conversion metrics (yes, three) :

  1. Session conversion – the percentage of sessions with a conversion.
  2. User conversion – the percentage of users who completed a conversion.
  3. First-time Purchaser Conversion – the share of active users who made their first purchase.

  If the last metric doesn’t interest us much, GA4 users can still choose something from the remaining two. But what’s next ? Which parameters to use for comparison ? Session source or user source ? What if you want to see the conversion rate for a specific event ? And how do you do this in analyses rather than in standard reports ?

  In the end, instead of an answer to a simple question, marketers get a bunch of new questions.

  Question 3. Can I trust user and session metrics ?

  Unfortunately, no. This may boggle the mind of those not well-versed in the mechanics of calculating user and session metrics, but it’s the plain truth : the numbers in GA4 and those in reality may and will differ.

  

  The reason is that GA4 uses the HyperLogLog++ statistical algorithm to count unique values. Without delving into details, it’s a mechanism for approximate estimation of a metric with a certain level of error.

  This error level is quite well-documented. For instance, for the Total Users metric, the error level is 1.63% (for a 95% confidence interval). In simple terms, this means that 100,000 users in the GA4 interface equate to 100,000 1.63% in reality.

  Furthermore – but this is no surprise to anyone – GA4 samples data. This means that with too large a sample size or when using a large number of parameters, the application will assess your metrics based on a partial sample – let’s say 5, 10, or 30% of the entire population.

  It’s a reasonable assumption, but it can (and probably will) surprise marketers – the metrics will deviate from reality. All end-users can do (excluding delving into raw data methodologies) is to take this error level into account in their conclusions.

  Question 4. How do I calculate First Click attribution ?

  You can’t. Unfortunately, as of late, GA4 offers only three attribution models available in the Attribution tab : Last Click, Last Click For Google Ads, and Data Driven. First Click attribution is essential for understanding where and when demand is generated. In the previous version of Google Analytics (and until recently, in the current one), users could quickly apply First Click and other attribution models, compare them, and gain insights. Now, this capability is gone.

  

  Certainly, you can look at the conversion distribution considering the First User Source parameter – this will be some proxy for First Click attribution. However, comparing it with others in the Model Comparison tab won’t be possible. In the context of the GA4 interface, it makes sense to forget about non-standard attribution models.

  Question 5. How do I account for intra-session traffic ?

  Intra-session traffic essentially refers to a change in traffic sources within a session. Imagine a scenario where a user comes to your site organically from Google and, within a minute, comes from an email campaign. In the previous version of Google Analytics, a new session with the traffic source “e-mail” would be created in such a case. But now, the situation has changed.

  A session now only ends in the case of a timeout – say, 30 minutes without interaction. This means a session will always have a source from which it started. If a user changes the source within a session (clicks on an ad, from email campaigns, and so on), you won’t know anything about it until they convert. This is a significant blow to intra-session traffic since their contribution to traffic remains virtually unnoticed. 

  Question 6. How can I account for users who have not consented to the use of third-party cookies ?
  

  You can’t. Google Consent Mode settings imply several options when a user rejects the use of 3rd party cookies. In GA4 and BigQuery, depersonalized cookieless pings will be sent. These pings do not contain specific client_id, session_id, or other custom dimensions. As a result, you won’t be able to consider them as users or link the actions of such users together.

  Question 7. How can I compare data in explorations with the previous year ?

  The maximum data retention period for a free GA4 account is 14 months. This means that if the date range is wider, you can only use standard reports. You won’t be able to compare or view cohorts or funnels for periods more than 14 months ago. This makes the product functionality less rich because various report formats in explorations are very convenient for comparing specific metrics in easily digestible reports.

  

  Of course, you always have the option to connect BigQuery and store raw data without limitations, but this process usually requires the involvement of an advanced analyst. And precisely this option is unavailable to most marketers in small teams.

  Question 8. Is the data for yesterday accurate ?

  Unknown. Google declares that data processing in GA4 takes up to 48 hours. And although this process is faster, most users still have room for frustration. And they can be understood.

  

  What does “data processing takes 24-48 hours” mean ? When will the data in reports be complete ? For yesterday ? Or the day before yesterday ? Or for all days that were more than two days ago ? Unclear. What should marketers tell their managers when they were asked if all the data is in this report ? Well, probably all of it… or maybe not… Let’s wait for 48 hours…

  Undoubtedly, computational resources and time are needed for data preprocessing and aggregation. It’s okay that data for today will not be up-to-date. And probably not for yesterday either. But people just want to know when they can trust their data. Are they asking for too much : just a note that this report contains all the data sent and processed by Google Analytics ?

  What should you do ?

  Credit should be given to the Google team – they have done a lot to enable users to answer these questions in one form or another. For example, you can use data streaming in BigQuery and work with raw data. The entry threshold for this functionality has been significantly lowered. In fact, if you are dissatisfied with the GA4 interface, you can organize your export to BigQuery and create your own reports without (almost) any restrictions.

  Another strong option is the widespread launch of GTM Server Side. This allows you to quite freely modify the event model and essentially enrich each hit with various parameters, doing this in a first-party context. This, of course, reduces the harmful impact of most of the limitations described in this text.

  But this is not a solution.

  The users in question – marketers, managers, developers – they do not want or do not have the time for a deep dive into the issue. And they want simple answers to simple (it seemed) questions. And for now, unfortunately, GA4 is more of a professional tool for analysts than a convenient instrument for generating insights for not very advanced users.

  Why is this such a serious issue ?

  The thing is – and this is crucial – over the past 10 years, Google has managed to create a sort of GA-bubble for marketers. Many of them have become so accustomed to Google Analytics that when faced with another issue, they don’t venture to explore alternative solutions but attempt to solve it on their own. And almost always, this turns out to be expensive and inconvenient.

  However, with the latest updates to GA4, it is becoming increasingly evident that this application is struggling to address even the most basic questions from users. And these questions are not fantastically complex. Much of what was described in this article is not an unsolvable mystery and is successfully addressed by other analytics services.

  Let’s try to answer some of the questions described from the perspective of Matomo.

  Question 1 : What are the most popular traffic sources ? [Solved]

  In the Acquisition panel, you will find at least three easily identifiable reports – for traffic channels (All Channels), sources (Websites), and campaigns (Campaigns). 

  

  With these, you can quickly and easily answer the question about the most popular traffic sources, and if needed, delve into more detailed information, such as landing pages.

  Question 2 : What is my conversion rate ? [Solved]

  Under Goals in Matomo, you’ll easily find the overall conversion rate for your site. Below that you’ll have access to the conversion rate of each goal you’ve set in your Matomo instance.

  

  Question 3 : Can I trust user and session metrics ? [Solved]

  Yes. With Matomo, you’re guaranteed 100% accurate data. Matomo does not apply sampling, does not employ specific statistical algorithms, or any analogs of threshold values. Yes, it is possible, and it’s perfectly normal. If you see a metric in the visits or users field, it accurately represents reality by 100%.

  Try Matomo for Free

  Get the web insights you need, without compromising data accuracy.

  Start for free

  No credit card required

  Question 4 : How do I calculate First Click attribution ? [Solved]
  
  You can do this in the same section where the other 5 attribution models, available in Matomo, are calculated – in the Multi Attribution section.

  

  You can choose a specific conversion and, in a few clicks, calculate and compare up to 3 marketing attribution models. This means you don’t have to spend several days digging through documentation trying to understand how a particular model is calculated. Have a question – get an answer.

  Question 5 : How do I account for intra-session traffic ? [Solved]

  Matomo creates a new visit when a user changes a campaign. This means that you will accurately capture all relevant traffic if it is adequately tagged. No campaigns will be lost within a visit, as they will have a new utm_campaign parameter.

  This is a crucial point because when the Referrer changes, a new visit is not created, but the key lies in something else – accounting for all available traffic becomes your responsibility and depends on how you tag it.

  Try Matomo for Free

  Get the web insights you need, without compromising data accuracy.

  Start for free

  No credit card required

  Question 6 : How can I account for users who have not consented to the use of third-party cookies ? [Solved]

  Google Analytics requires users to accept a cookie consent banner with “analytics_storage=granted” to track them. If users reject cookie consent banners, however, then Google Analytics can’t track these visitors at all. They simply won’t show up in your traffic reports. 

  Matomo doesn’t require cookie consent banners (apart from in the United Kingdom and Germany) and can therefore continue to track visitors even after they have rejected a cookie consent screen. This is achieved through a config_id variable (the user identifier equivalent which is updating once a day). 

  

  This means that virtually all of your website traffic will be tracked regardless of whether users accept a cookie consent banner or not.

  Question 7 : How can I compare data in explorations with the previous year ? [Solved]
  

  There is no limitation on data retention for your aggregated reports in Matomo. The essence of Matomo experience lies in the reporting data, and consequently, retaining reports indefinitely is a viable option. So you can compare data for any timeframe. 7

  

• FFMPEG problems with real-time buffer

  27 juin 2024, par Charles Kiel

  I'm trying to use FFMPEG (Windows) to encode a stream from a video capture card via dshow and send to a RTMP server. THis is my command line ;

  



      ffmpeg -f dshow -i video="AVerMedia BDA Analog Capture Secondary":audio="Microphone (6- C-Media USB Audi" -vf scale=1280:720 -vcodec libx264 -r 30 -rtbufsize 702000k -acodec mp3 -ac 2 -ar 44100 -ab 128k -pix_fmt yuv420p -tune zerolatency -preset ultrafast -f flv "rtmp://xxx.xxx.xxx.xxx/stream/key"        ffmpeg version N-86950-g1bef008 Copyright (c) 2000-2017 the FFmpeg developers
    built with gcc 7.1.0 (GCC)
    configuration: --enable-gpl --enable-version3 --enable-cuda --enable-cuvid --enable-d3d11va --enable-dxva2 --enable-libmfx --enable-nvenc --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libbs2b --enable
    -libcaca --enable-libfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libsnappy --enable-libsoxr --enable-libspe
    ex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-libzimg --enable-lzma --enable-zlib
    libavutil      55. 70.100 / 55. 70.100
    libavcodec     57.102.100 / 57.102.100
    libavformat    57. 76.100 / 57. 76.100
    libavdevice    57.  7.100 / 57.  7.100
    libavfilter     6. 98.100 /  6. 98.100
    libswscale      4.  7.102 /  4.  7.102
    libswresample   2.  8.100 /  2.  8.100
    libpostproc    54.  6.100 / 54.  6.100
    Guessed Channel Layout for Input Stream #0.1 : stereo
    Input #0, dshow, from 'video=AVerMedia BDA Analog Capture Secondary:audio=Microphone (6- C-Media USB Audi':
    Duration: N/A, start: 2035.202000, bitrate: N/A
    Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 720x480, 29.97 fps, 29.97 tbr, 10000k tbn, 10000k tbc
    Stream #0:1: Audio: pcm_s16le, 44100 Hz, stereo, s16, 1411 kb/s
    [dshow @ 00000000005f90e0] real-time buffer [AVerMedia BDA Analog Capture Secondary] [video input] too full or near too full (68% of size: 3041280 [rtbufsize parameter])! frame dropped!
    [dshow @ 00000000005f90e0] real-time buffer [AVerMedia BDA Analog Capture Secondary] [video input] too full or near too full (90% of size: 3041280 [rtbufsize parameter])! frame dropped!
    [dshow @ 00000000005f90e0] real-time buffer [AVerMedia BDA Analog Capture Secondary] [video input] too full or near too full (113% of size: 3041280 [rtbufsize parameter])! frame dropped!
    Last message repeated 46 times
    Stream mapping:
    Stream #0:0 -> #0:0 (rawvideo (native) -> h264 (libx264))
    Stream #0:1 -> #0:1 (pcm_s16le (native) -> mp3 (libmp3lame))
    Press [q] to stop, [?] for help
    [dshow @ 00000000005f90e0] real-time buffer [AVerMedia BDA Analog Capture Secondary] [video input] too full or near too full (113% of size: 3041280 [rtbufsize parameter])! frame dropped!
    [libx264 @ 0000000005b16640] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
    [libx264 @ 0000000005b16640] profile Constrained Baseline, level 3.1
    [libx264 @ 0000000005b16640] 264 - core 152 r2851 ba24899 - H.264/MPEG-4 AVC codec - Copyleft 2003-2017 - http://www.videolan.org/x264.html - options: cabac=0 ref=1 deblock=0:0:0 analyse=0:0 me=dia subme=0 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=0 8x8dct=0 cqm=0 deadzone=2
    1,11 fast_pskip=1 chroma_qp_offset=0 threads=11 lookahead_threads=11 sliced_threads=1 slices=11 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=0 weightp=0 keyint=250 keyint_min=25 scenecut=0 intra_refresh=0 rc=crf mbtree=0 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ra
    tio=1.40 aq=0
    [dshow @ 00000000005f90e0] real-time buffer [AVerMedia BDA Analog Capture Secondary] [video input] too full or near too full (113% of size: 3041280 [rtbufsize parameter])! frame dropped!
    Past duration 0.999992 too large


  



  The buffer too full message are non-stop. I can use Open Broadcast Software (OBS) and stream with no problem (I'm pretty sure it also uses ffmpeg), so I'm doing something wrong.