
Recherche avancée
Autres articles (65)
-
Le profil des utilisateurs
12 avril 2011, parChaque utilisateur dispose d’une page de profil lui permettant de modifier ses informations personnelle. Dans le menu de haut de page par défaut, un élément de menu est automatiquement créé à l’initialisation de MediaSPIP, visible uniquement si le visiteur est identifié sur le site.
L’utilisateur a accès à la modification de profil depuis sa page auteur, un lien dans la navigation "Modifier votre profil" est (...) -
Configurer la prise en compte des langues
15 novembre 2010, parAccéder à la configuration et ajouter des langues prises en compte
Afin de configurer la prise en compte de nouvelles langues, il est nécessaire de se rendre dans la partie "Administrer" du site.
De là, dans le menu de navigation, vous pouvez accéder à une partie "Gestion des langues" permettant d’activer la prise en compte de nouvelles langues.
Chaque nouvelle langue ajoutée reste désactivable tant qu’aucun objet n’est créé dans cette langue. Dans ce cas, elle devient grisée dans la configuration et (...) -
La sauvegarde automatique de canaux SPIP
1er avril 2010, parDans le cadre de la mise en place d’une plateforme ouverte, il est important pour les hébergeurs de pouvoir disposer de sauvegardes assez régulières pour parer à tout problème éventuel.
Pour réaliser cette tâche on se base sur deux plugins SPIP : Saveauto qui permet une sauvegarde régulière de la base de donnée sous la forme d’un dump mysql (utilisable dans phpmyadmin) mes_fichiers_2 qui permet de réaliser une archive au format zip des données importantes du site (les documents, les éléments (...)
Sur d’autres sites (6803)
-
Raspberry Pi Camera Module - Stream to LAN
20 août 2015, par user3096434have a little problem with the setup of my RasPi camera infrastructure. Basically I have a RPi 2 which shall act as a MontionEye server from now on and 2 Pi B+ with camera modules.
Previously, when I had only one camera in my network, I used the following command to stream the output from RPi B+ camera module to Youtube in full HD. So far, this command works flawless :
raspivid -n -vf -hf -t 0 -w 1920 -h 1080 -fps 30 -b 3750000 -g 50 -o - | b ffmpeg -ar 8000 -ac 2 -acodec pcm_s16le -f s16le -ac 2 -i /dev/zero -f h264 -i - -vcodec copy -acodec aac -ab 64k -g 50 -strict experimental -f flv $RTMP_URL/$STREAM_KEY
Now I have a 2nd RPi with a camera module and figured it might be the time for a change towards motioneye, as I then can view both/all camera’s in my network within the same software. I have motioneye installed on my RPi 2 and the software is running correctly.
I have a little problem when it comes to access the data stream from the RPi B+ camera on my local network.
Basically I cannot seem to figure out how to change the ffmpeg portion of the above mentioned command, in a way so it will stream the data to localhost (Or the RPi2 IP where motioneye runs - which one to use ?) instead of Youtube or any other videohoster.
I wonder, if changing the following part is a correct assumption :
Instead of using variables to define Youtube URL and key
-f flv $RTMP_URL/$STREAM_KEY
And change this to
-f flv 10.1.1.11:8080
Will I then be able to add this RPi B+ video stream to my RPi 2 motioneye server, by using motioneye ’add network camera’ function ?
From my understanding I should be able to enter the following details into motioneye ’add network camera’wizard :
Camera type: network camera
RTSP-URL: 10.1.1.11:8080
User: Pi
Pass: [my pwd]
Camera: [my ffmpeg stream shall show here]Thanks in advance !
Uhm, and then... How do I forwarded the video stream from a given camera connected to motioneye ? Like from motioneye to youtube (or similar), without re-encoding the stream ?
Like the command shown above streams directly to youtube. But I want to have it in a way, that video is streamed to local network/motioneye server, and from there I can decide which camera’s stream and when I want to send the videostream to youtube ?
How would a RPi professional realize this ?
The command above explained : Takes full HD video with 30 fps from Pi camera module and hardware encodes it on GPU with 3.75mbit/s. Then I streamcopy the video (no re-encoding) and add some audio, so that the stream complies with youtube rules (yes, no live stream without audio). Audio is taken from virtual SB16 /dev/zero at low sampling rate then encoded to 32k AAC and sent to youtube. Works fine xD.
Just when I have like 3 or more of these RPi cams the youtube stream approach ain’t feasible anymore, as my DSL upstream is limited (10 mbit/s=. Thus I need motioneye server and some magic, so I can watch f.e. all 3 camera’s videostream and then motioneye server can select and streamcopy the video from the Pi’s cam I choose and send it to youtube, as the original command did.
Any help, tips, links to similar projects highly appreciated.
Again, many thanks in advance, and even more thanks just cause you read until here.
—mx
-
ffmpeg : How to speed up (and keep only) a specified portion of an input video
17 avril 2020, par shrimpwidgetIn my input video is a 48 second range that I wish to speed up. I wish to save only that sped up portion to a new video.



Solution :



ffmpeg -y -ss 00:00:03 -t 00:00:48 -i input.mp4 -an -crf 20 -pix_fmt yuv420p -vf "scale=1080:-1, setpts=PTS/10.0" "output.mp4"



-
| NGINX | FFMPEG not creating DASH manifests or chunks in the designated DIR |
7 avril 2020, par Mathew KnightHopefully someone can help here, I have a setup that takes two input RTMP streams from two separate machines into my server. From here I am trying to serve some MPEG DASH manifests and chunks to an experimental spatial audio/360 web (.js) player.



My issue is that while i can see the FFMPEG processes running and creating the Chunks the files themselves are not appearing in the specified folder and so the media player will not read the content.



Is there something obvious that i am not doing that is preventing these files being written ?



Any help with this would be amazing !!!



Here is my config :



#user www-data;
worker_processes auto;
pid /run/nginx.pid;
include /etc/nginx/modules-enabled/*.conf;

events {
 worker_connections 768;
 # multi_accept on;
}

http {

 ##
 # Basic Settings
 ##

 sendfile on;
 tcp_nopush on;
 tcp_nodelay on;
 keepalive_timeout 65;
 types_hash_max_size 2048;
 # server_tokens off;

 # server_names_hash_bucket_size 64;
 # server_name_in_redirect off;

 include /etc/nginx/mime.types;
 default_type application/octet-stream;

 ##
 # SSL Settings
 ##

 ssl_protocols TLSv1 TLSv1.1 TLSv1.2; # Dropping SSLv3, ref: POODLE
 ssl_prefer_server_ciphers on;

 ##
 # Logging Settings
 ##

 access_log /var/log/nginx/access.log;
 error_log /var/log/nginx/error.log;


 ##
 # Virtual Host Configs
 ##

 include /etc/nginx/conf.d/*.conf;
 include /etc/nginx/sites-enabled/*;

}

rtmp {
 server {
 listen 1935;
 chunk_size 4096;

 application live {
 live on;
 record off;
 interleave off;
 wait_key on;
 meta on;
 wait_video off;
 idle_streams off;
 sync 300ms;
 session_relay on;
 #allow publish 127.0.0.1;
 #allow publish 192.168.2.0/24;
 allow publish all;
 #deny publish all;
 allow play all; 

 dash on;
 dash_nested on;
 dash_path /tmp/dash;
 dash_fragment 3;
 dash_playlist_length 120;
 dash_cleanup on;

 #dash_clock_compensation http_head;
 #dash_clock_helper_uri https://localhost/time;

 #dash_variant _low bandwidth="500000" width="640" height="360";
 #dash_variant _med bandwidth="1500000" width="1280" height="720";
 #dash_variant _high bandwidth="5000000" width="1920" height="1080" max;

 # EDIT THESE SO THE LIVESTREAM_KEY IS REPLACED BY YOUR PERSONAL KEY THAT YOU CAN LOOK UP ON THE SITE OF THE PLATFORM
 # push rtmp://live-ams.twitch.tv/app/LIVESTREAM_KEY;
 # push rtmp://a.rtmp.youtube.com/live2/LIVESTREAM_KEY;
 # push rtmp://ingest-ams.mixer.com:1935/beam/LIVESTREAM_KEY;

 exec_push ffmpeg -re -an -i 'rtmp://localhost:1935/live/stream' -c:v libx264 -preset veryfast -s 1920x1080 -bufsize 15000k -b:v 15000k -keyint_min 150 -g 150 -tile-columns 4 -frame-parallel 1 -an -f dash -init_seg_name 'init-stream$RepresentationID$_video.webm' -media_seg_name 'chunk-stream$RepresentationID$_video-$Number%05d$.webm' 'http://localhost:1935/dash/video.mpd' 2>>/var/log/nginx/ffmpegvideo.log;




 }



 application dash {
 #TRANSCODED VIDEO/AUDIO FROM FFMPEG COMES HERE?????
 live on;
 meta copy;

 record all;
 record_path /rec;
 }

 }


 server {
 listen 1936;
 chunk_size 4096;

 application live {
 live on;
 record off;
 interleave off;
 wait_key on;
 meta on;
 wait_video off;
 idle_streams off;
 sync 300ms;
 session_relay on;
 #allow publish 127.0.0.1;
 #allow publish 192.168.2.0/24;
 allow publish all;
 #deny publish all;
 allow play all; 


 # EDIT THESE SO THE LIVESTREAM_KEY IS REPLACED BY YOUR PERSONAL KEY THAT YOU CAN LOOK UP ON THE SITE OF THE PLATFORM
 # push rtmp://live-ams.twitch.tv/app/LIVESTREAM_KEY;
 # push rtmp://a.rtmp.youtube.com/live2/LIVESTREAM_KEY;
 # push rtmp://ingest-ams.mixer.com:1935/beam/LIVESTREAM_KEY;

 exec_push ffmpeg -re -i 'rtmp://localhost:1936/live/stream' -filter 'channelmap=0|1|2|3|4|5|6|7:' -c:a libopus -b:a 512k -vn -f dash -init_seg_name 'init-stream$RepresentationID$_audio_01-08ch.webm' -media_seg_name 'chunk-stream$RepresentationID$_audio_01-08ch-$Number%05d$.webm' 'http://localhost:1936/dash/audio_01-08ch.mpd' -filter 'channelmap=8|9|10|11|12|13|14|15:' -c:a libopus -b:a 512k -vn -f dash -init_seg_name 'init-stream$RepresentationID$_audio_09-16ch.webm' -media_seg_name 'chunk-stream$RepresentationID$_audio_09-16ch-$Number%05d$.webm' 'http://localhost:1936/dash/audio_09-16ch.mpd' 2>>/var/log/nginx/ffmpegaudio.log;
 }





 application dash {
 #TRANSCODED AUDIO FROM FFMPEG COMES HERE?????
 live on;
 meta copy;
 }


}
}




and here is the output from my FFMPEG logs :



AUDIO :



ffmpeg version 3.4.6-0ubuntu0.18.04.1 Copyright (c) 2000-2019 the FFmpeg developers
 built with gcc 7 (Ubuntu 7.3.0-16ubuntu3)
 configuration: --prefix=/usr --extra-version=0ubuntu0.18.04.1 --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --enable-gpl --disable-stripping --enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librubberband --enable-librsvg --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libopencv --enable-libx264 --enable-shared
 libavutil 55. 78.100 / 55. 78.100
 libavcodec 57.107.100 / 57.107.100
 libavformat 57. 83.100 / 57. 83.100
 libavdevice 57. 10.100 / 57. 10.100
 libavfilter 6.107.100 / 6.107.100
 libavresample 3. 7. 0 / 3. 7. 0
 libswscale 4. 8.100 / 4. 8.100
 libswresample 2. 9.100 / 2. 9.100
 libpostproc 54. 7.100 / 54. 7.100
[aac @ 0x55bfeaaafc60] Channel layout 'stereo' with 2 channels does not match specified number of channels 16: ignoring specified channel layout
Guessed Channel Layout for Input Stream #0.0 : hexadecagonal
Input #0, flv, from 'rtmp://localhost:1936/live/stream':
 Metadata:
 Server : NGINX RTMP (github.com/arut/nginx-rtmp-module)
 displayWidth : 0
 displayHeight : 0
 fps : 0
 profile : 
 level : 
 Duration: 00:00:00.00, start: 0.042000, bitrate: N/A
 Stream #0:0: Audio: aac (LC), 48000 Hz, hexadecagonal, fltp, 512 kb/s
Stream mapping:
 Stream #0:0 -> #0:0 (aac (native) -> opus (libopus))
 Stream #0:0 -> #1:0 (aac (native) -> opus (libopus))
Press [q] to stop, [?] for help
[dash @ 0x55bfeaab43e0] Opening 'http://localhost:1936/dash/init-stream_audio_01-08ch.webm' for writing
Output #0, dash, to 'http://localhost:1936/dash/audio_01-08ch.mpd':
 Metadata:
 Server : NGINX RTMP (github.com/arut/nginx-rtmp-module)
 displayWidth : 0
 displayHeight : 0
 fps : 0
 profile : 
 level : 
 encoder : Lavf57.83.100
 Stream #0:0: Audio: opus (libopus), 48000 Hz, 7.1, flt, 512 kb/s
 Metadata:
 encoder : Lavc57.107.100 libopus
[dash @ 0x55bfeaab43e0] Cannot use rename on non file protocol, this may lead to races and temporary partial files
[dash @ 0x55bfeaaecb00] Opening 'http://localhost:1936/dash/init-stream_audio_09-16ch.webm' for writing
Output #1, dash, to 'http://localhost:1936/dash/audio_09-16ch.mpd':
 Metadata:
 Server : NGINX RTMP (github.com/arut/nginx-rtmp-module)
 displayWidth : 0
 displayHeight : 0
 fps : 0
 profile : 
 level : 
 encoder : Lavf57.83.100
 Stream #1:0: Audio: opus (libopus), 48000 Hz, 7.1, flt, 512 kb/s
 Metadata:
 encoder : Lavc57.107.100 libopus
size=N/A time=00:00:00.49 bitrate=N/A speed=0.986x 
size=N/A time=00:00:01.01 bitrate=N/A speed=1.01x 
size=N/A time=00:00:01.49 bitrate=N/A speed=0.993x 
size=N/A time=00:00:02.01 bitrate=N/A speed= 1x 
size=N/A time=00:00:02.49 bitrate=N/A speed=0.995x 
size=N/A time=00:00:03.01 bitrate=N/A speed= 1x 
size=N/A time=00:00:03.53 bitrate=N/A speed= 1x 
size=N/A time=00:00:04.01 bitrate=N/A speed=0.998x 
size=N/A time=00:00:04.53 bitrate=N/A speed= 1x 
[dash @ 0x55bfeaab43e0] Opening 'http://localhost:1936/dash/chunk-stream_audio_01-08ch-%05d.webm' for writing
[dash @ 0x55bfeaaecb00] Opening 'http://localhost:1936/dash/chunk-stream_audio_09-16ch-%05d.webm' for writing
size=N/A time=00:00:05.01 bitrate=N/A speed=0.997x 
size=N/A time=00:00:05.53 bitrate=N/A speed= 1x 
size=N/A time=00:00:06.03 bitrate=N/A speed=0.999x 
size=N/A time=00:00:06.55 bitrate=N/A speed= 1x 
size=N/A time=00:00:07.05 bitrate=N/A speed=0.999x 
size=N/A time=00:00:07.55 bitrate=N/A speed=0.999x 
size=N/A time=00:00:08.07 bitrate=N/A speed= 1x 
size=N/A time=00:00:08.57 bitrate=N/A speed= 1x 
size=N/A time=00:00:09.09 bitrate=N/A speed= 1x 
size=N/A time=00:00:09.59 bitrate=N/A speed= 1x 
[dash @ 0x55bfeaab43e0] Opening 'http://localhost:1936/dash/chunk-stream_audio_01-08ch-%05d.webm' for writing
[dash @ 0x55bfeaaecb00] Opening 'http://localhost:1936/dash/chunk-stream_audio_09-16ch-%05d.webm' for writing
size=N/A time=00:00:10.09 bitrate=N/A speed=0.999x 
size=N/A time=00:00:10.61 bitrate=N/A speed= 1x 
size=N/A time=00:00:11.09 bitrate=N/A speed=0.999x 
size=N/A time=00:00:11.61 bitrate=N/A speed= 1x 
size=N/A time=00:00:12.11 bitrate=N/A speed=0.999x 
size=N/A time=00:00:12.63 bitrate=N/A speed= 1x 
size=N/A time=00:00:13.13 bitrate=N/A speed= 1x 
size=N/A time=00:00:13.63 bitrate=N/A speed=0.999x 
size=N/A time=00:00:14.15 bitrate=N/A speed= 1x 
size=N/A time=00:00:14.63 bitrate=N/A speed=0.999x 
[dash @ 0x55bfeaab43e0] Opening 'http://localhost:1936/dash/chunk-stream_audio_01-08ch-%05d.webm' for writing
[dash @ 0x55bfeaaecb00] Opening 'http://localhost:1936/dash/chunk-stream_audio_09-16ch-%05d.webm' for writing
size=N/A time=00:00:15.15 bitrate=N/A speed= 1x 
size=N/A time=00:00:15.67 bitrate=N/A speed= 1x 
size=N/A time=00:00:16.15 bitrate=N/A speed=0.999x 
size=N/A time=00:00:16.67 bitrate=N/A speed= 1x 
size=N/A time=00:00:17.15 bitrate=N/A speed=0.999x 
size=N/A time=00:00:17.67 bitrate=N/A speed= 1x 
size=N/A time=00:00:18.17 bitrate=N/A speed= 1x 
size=N/A time=00:00:18.67 bitrate=N/A speed=0.999x 
size=N/A time=00:00:19.19 bitrate=N/A speed= 1x 
size=N/A time=00:00:19.69 bitrate=N/A speed= 1x 
[dash @ 0x55bfeaab43e0] Opening 'http://localhost:1936/dash/chunk-stream_audio_01-08ch-%05d.webm' for writing
[dash @ 0x55bfeaaecb00] Opening 'http://localhost:1936/dash/chunk-stream_audio_09-16ch-%05d.webm' for writing





VIDEO :



ffmpeg version 3.4.6-0ubuntu0.18.04.1 Copyright (c) 2000-2019 the FFmpeg developers
 built with gcc 7 (Ubuntu 7.3.0-16ubuntu3)
 configuration: --prefix=/usr --extra-version=0ubuntu0.18.04.1 --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --enable-gpl --disable-stripping --enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librubberband --enable-librsvg --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libopencv --enable-libx264 --enable-shared
 libavutil 55. 78.100 / 55. 78.100
 libavcodec 57.107.100 / 57.107.100
 libavformat 57. 83.100 / 57. 83.100
 libavdevice 57. 10.100 / 57. 10.100
 libavfilter 6.107.100 / 6.107.100
 libavresample 3. 7. 0 / 3. 7. 0
 libswscale 4. 8.100 / 4. 8.100
 libswresample 2. 9.100 / 2. 9.100
 libpostproc 54. 7.100 / 54. 7.100
Input #0, flv, from 'rtmp://localhost:1935/live/stream':
 Metadata:
 Server : NGINX RTMP (github.com/arut/nginx-rtmp-module)
 displayWidth : 3840
 displayHeight : 1920
 fps : 30
 profile : 
 level : 
 Duration: 00:00:00.00, start: 0.033000, bitrate: N/A
 Stream #0:0: Video: h264 (High), yuv420p(tv, bt470bg/bt709/bt709, progressive), 3840x1920 [SAR 1:1 DAR 2:1], 15360 kb/s, 30 fps, 30 tbr, 1k tbn, 60 tbc
 Stream #0:1: Audio: aac (LC), 48000 Hz, 7.1, fltp, 327 kb/s
Codec AVOption tile-columns (Number of tile columns to use, log2) specified for output file #0 (http://localhost:1935/dash/video.mpd) has not been used for any stream. The most likely reason is either wrong type (e.g. a video option with no video streams) or that it is a private option of some encoder which was not actually used for any stream.
Codec AVOption frame-parallel (Enable frame parallel decodability features) specified for output file #0 (http://localhost:1935/dash/video.mpd) has not been used for any stream. The most likely reason is either wrong type (e.g. a video option with no video streams) or that it is a private option of some encoder which was not actually used for any stream.
Stream mapping:
 Stream #0:0 -> #0:0 (h264 (native) -> h264 (libx264))
Press [q] to stop, [?] for help
[libx264 @ 0x55e24ea47f40] VBV maxrate unspecified, assuming CBR
[libx264 @ 0x55e24ea47f40] using SAR=9/8
[libx264 @ 0x55e24ea47f40] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
[libx264 @ 0x55e24ea47f40] profile High, level 4.0
[libx264 @ 0x55e24ea47f40] 264 - core 152 r2854 e9a5903 - H.264/MPEG-4 AVC codec - Copyleft 2003-2017 - http://www.videolan.org/x264.html - options: cabac=1 ref=1 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=2 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=0 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=0 threads=6 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=1 keyint=150 keyint_min=76 scenecut=40 intra_refresh=0 rc_lookahead=10 rc=cbr mbtree=1 bitrate=15000 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 vbv_maxrate=15000 vbv_bufsize=15000 nal_hrd=none filler=0 ip_ratio=1.40 aq=1:1.00
[dash @ 0x55e24ea4b640] Opening 'http://localhost:1935/dash/init-stream_video.webm' for writing
Output #0, dash, to 'http://localhost:1935/dash/video.mpd':
 Metadata:
 Server : NGINX RTMP (github.com/arut/nginx-rtmp-module)
 displayWidth : 3840
 displayHeight : 1920
 fps : 30
 profile : 
 level : 
 encoder : Lavf57.83.100
 Stream #0:0: Video: h264 (libx264), yuv420p, 1920x1080 [SAR 9:8 DAR 2:1], q=-1--1, 15000 kb/s, 30 fps, 15360 tbn, 30 tbc
 Metadata:
 encoder : Lavc57.107.100 libx264
 Side data:
 cpb: bitrate max/min/avg: 0/0/15000000 buffer size: 15000000 vbv_delay: -1
frame= 11 fps=0.0 q=0.0 size=N/A time=00:00:00.00 bitrate=N/A speed= 0x 
[dash @ 0x55e24ea4b640] Cannot use rename on non file protocol, this may lead to races and temporary partial files
frame= 26 fps= 26 q=19.0 size=N/A time=00:00:00.10 bitrate=N/A speed=0.0997x 
frame= 42 fps= 28 q=17.0 size=N/A time=00:00:00.63 bitrate=N/A speed=0.421x 
frame= 57 fps= 28 q=14.0 size=N/A time=00:00:01.13 bitrate=N/A speed=0.565x 
frame= 72 fps= 29 q=15.0 size=N/A time=00:00:01.63 bitrate=N/A speed=0.65x 
frame= 87 fps= 29 q=14.0 size=N/A time=00:00:02.13 bitrate=N/A speed=0.706x 
frame= 102 fps= 29 q=16.0 size=N/A time=00:00:02.63 bitrate=N/A speed=0.746x 
frame= 118 fps= 29 q=16.0 size=N/A time=00:00:03.16 bitrate=N/A speed=0.785x 
frame= 133 fps= 29 q=17.0 size=N/A time=00:00:03.66 bitrate=N/A speed=0.807x 
frame= 148 fps= 29 q=15.0 size=N/A time=00:00:04.16 bitrate=N/A speed=0.826x 
frame= 163 fps= 29 q=18.0 size=N/A time=00:00:04.66 bitrate=N/A speed=0.841x 
[dash @ 0x55e24ea4b640] Opening 'http://localhost:1935/dash/chunk-stream_video-%05d.webm' for writing
frame= 178 fps= 29 q=17.0 size=N/A time=00:00:05.16 bitrate=N/A speed=0.854x 
frame= 193 fps= 29 q=18.0 size=N/A time=00:00:05.66 bitrate=N/A speed=0.864x 
frame= 208 fps= 29 q=15.0 size=N/A time=00:00:06.16 bitrate=N/A speed=0.873x 
frame= 224 fps= 30 q=15.0 size=N/A time=00:00:06.70 bitrate=N/A speed=0.885x 
frame= 239 fps= 30 q=16.0 size=N/A time=00:00:07.20 bitrate=N/A speed=0.892x 
frame= 254 fps= 30 q=15.0 size=N/A time=00:00:07.70 bitrate=N/A speed=0.898x 
frame= 269 fps= 30 q=17.0 size=N/A time=00:00:08.20 bitrate=N/A speed=0.903x 
frame= 284 fps= 30 q=16.0 size=N/A time=00:00:08.70 bitrate=N/A speed=0.908x 
frame= 299 fps= 30 q=16.0 size=N/A time=00:00:09.20 bitrate=N/A speed=0.912x 
frame= 314 fps= 30 q=18.0 size=N/A time=00:00:09.70 bitrate=N/A speed=0.916x 
[dash @ 0x55e24ea4b640] Opening 'http://localhost:1935/dash/chunk-stream_video-%05d.webm' for writing
frame= 330 fps= 30 q=17.0 size=N/A time=00:00:10.23 bitrate=N/A speed=0.922x 
frame= 345 fps= 30 q=17.0 size=N/A time=00:00:10.73 bitrate=N/A speed=0.925x 
frame= 360 fps= 30 q=15.0 size=N/A time=00:00:11.23 bitrate=N/A speed=0.928x 
frame= 375 fps= 30 q=15.0 size=N/A time=00:00:11.73 bitrate=N/A speed=0.931x 
frame= 390 fps= 30 q=16.0 size=N/A time=00:00:12.23 bitrate=N/A speed=0.933x 
frame= 405 fps= 30 q=17.0 size=N/A time=00:00:12.73 bitrate=N/A speed=0.935x 
frame= 420 fps= 30 q=14.0 size=N/A time=00:00:13.23 bitrate=N/A speed=0.937x 
frame= 435 fps= 30 q=16.0 size=N/A time=00:00:13.73 bitrate=N/A speed=0.94x 
frame= 450 fps= 30 q=16.0 size=N/A time=00:00:14.23 bitrate=N/A speed=0.941x 
frame= 465 fps= 30 q=18.0 size=N/A time=00:00:14.73 bitrate=N/A speed=0.943x 
[dash @ 0x55e24ea4b640] Opening 'http://localhost:1935/dash/chunk-stream_video-%05d.webm' for writing
frame= 481 fps= 30 q=16.0 size=N/A time=00:00:15.26 bitrate=N/A speed=0.946x 
frame= 496 fps= 30 q=17.0 size=N/A time=00:00:15.76 bitrate=N/A speed=0.947x 
frame= 511 fps= 30 q=16.0 size=N/A time=00:00:16.26 bitrate=N/A speed=0.949x 
frame= 526 fps= 30 q=16.0 size=N/A time=00:00:16.76 bitrate=N/A speed=0.95x 
frame= 541 fps= 30 q=16.0 size=N/A time=00:00:17.26 bitrate=N/A speed=0.951x 
frame= 557 fps= 30 q=16.0 size=N/A time=00:00:17.80 bitrate=N/A speed=0.953x 
frame= 572 fps= 30 q=15.0 size=N/A time=00:00:18.30 bitrate=N/A speed=0.954x 
frame= 587 fps= 30 q=16.0 size=N/A time=00:00:18.80 bitrate=N/A speed=0.955x 
frame= 602 fps= 30 q=16.0 size=N/A time=00:00:19.30 bitrate=N/A speed=0.956x 
frame= 618 fps= 30 q=18.0 size=N/A time=00:00:19.83 bitrate=N/A speed=0.958x 
[dash @ 0x55e24ea4b640] Opening 'http://localhost:1935/dash/chunk-stream_video-%05d.webm' for writing
frame= 633 fps= 30 q=17.0 size=N/A time=00:00:20.33 bitrate=N/A speed=0.959x 
frame= 648 fps= 30 q=16.0 size=N/A time=00:00:20.83 bitrate=N/A speed=0.96x 
frame= 663 fps= 30 q=16.0 size=N/A time=00:00:21.33 bitrate=N/A speed=0.961x 
frame= 678 fps= 30 q=16.0 size=N/A time=00:00:21.83 bitrate=N/A speed=0.961x 
frame= 693 fps= 30 q=16.0 size=N/A time=00:00:22.33 bitrate=N/A speed=0.962x 
frame= 708 fps= 30 q=16.0 size=N/A time=00:00:22.83 bitrate=N/A speed=0.962x 
frame= 723 fps= 30 q=17.0 size=N/A time=00:00:23.33 bitrate=N/A speed=0.963x 
frame= 739 fps= 30 q=17.0 size=N/A time=00:00:23.86 bitrate=N/A speed=0.965x 
frame= 754 fps= 30 q=16.0 size=N/A time=00:00:24.36 bitrate=N/A speed=0.965x 
frame= 769 fps= 30 q=18.0 size=N/A time=00:00:24.86 bitrate=N/A speed=0.966x 
[dash @ 0x55e24ea4b640] Opening 'http://localhost:1935/dash/chunk-stream_video-%05d.webm' for writing
frame= 784 fps= 30 q=15.0 size=N/A time=00:00:25.36 bitrate=N/A speed=0.966x 
frame= 799 fps= 30 q=15.0 size=N/A time=00:00:25.86 bitrate=N/A speed=0.967x 
frame= 814 fps= 30 q=15.0 size=N/A time=00:00:26.36 bitrate=N/A speed=0.967x 
frame= 829 fps= 30 q=16.0 size=N/A time=00:00:26.86 bitrate=N/A speed=0.968x 
frame= 844 fps= 30 q=15.0 size=N/A time=00:00:27.36 bitrate=N/A speed=0.968x 
frame= 860 fps= 30 q=15.0 size=N/A time=00:00:27.90 bitrate=N/A speed=0.97x 
frame= 875 fps= 30 q=15.0 size=N/A time=00:00:28.40 bitrate=N/A speed=0.97x 
frame= 890 fps= 30 q=15.0 size=N/A time=00:00:28.90 bitrate=N/A speed=0.971x 
frame= 905 fps= 30 q=16.0 size=N/A time=00:00:29.40 bitrate=N/A speed=0.971x 
frame= 920 fps= 30 q=18.0 size=N/A time=00:00:29.90 bitrate=N/A speed=0.971x 
[dash @ 0x55e24ea4b640] Opening 'http://localhost:1935/dash/chunk-stream_video-%05d.webm' for writing
frame= 935 fps= 30 q=16.0 size=N/A time=00:00:30.40 bitrate=N/A speed=0.971x 
frame= 950 fps= 30 q=16.0 size=N/A time=00:00:30.90 bitrate=N/A speed=0.972x 
frame= 966 fps= 30 q=15.0 size=N/A time=00:00:31.43 bitrate=N/A speed=0.973x 
frame= 981 fps= 30 q=15.0 size=N/A time=00:00:31.93 bitrate=N/A speed=0.973x 
frame= 996 fps= 30 q=16.0 size=N/A time=00:00:32.43 bitrate=N/A speed=0.974x 
frame= 1011 fps= 30 q=15.0 size=N/A time=00:00:32.93 bitrate=N/A speed=0.974x 
frame= 1026 fps= 30 q=16.0 size=N/A time=00:00:33.43 bitrate=N/A speed=0.974x 
frame= 1041 fps= 30 q=16.0 size=N/A time=00:00:33.93 bitrate=N/A speed=0.974x 
frame= 1057 fps= 30 q=16.0 size=N/A time=00:00:34.46 bitrate=N/A speed=0.975x 
[dash @ 0x55e24ea4b640] Opening 'http://localhost:1935/dash/chunk-stream_video-%05d.webm' for writing
frame= 1072 fps= 30 q=18.0 size=N/A time=00:00:34.96 bitrate=N/A speed=0.976x 
frame= 1087 fps= 30 q=18.0 size=N/A time=00:00:35.46 bitrate=N/A speed=0.976x 
frame= 1102 fps= 30 q=15.0 size=N/A time=00:00:35.96 bitrate=N/A speed=0.976x 
frame= 1117 fps= 30 q=15.0 size=N/A time=00:00:36.46 bitrate=N/A speed=0.976x 
frame= 1132 fps= 30 q=16.0 size=N/A time=00:00:36.96 bitrate=N/A speed=0.976x 
frame= 1148 fps= 30 q=16.0 size=N/A time=00:00:37.50 bitrate=N/A speed=0.977x 
frame= 1163 fps= 30 q=17.0 size=N/A time=00:00:38.00 bitrate=N/A speed=0.978x 
frame= 1178 fps= 30 q=15.0 size=N/A time=00:00:38.50 bitrate=N/A speed=0.978x 
frame= 1193 fps= 30 q=15.0 size=N/A time=00:00:39.00 bitrate=N/A speed=0.978x 
frame= 1208 fps= 30 q=18.0 size=N/A time=00:00:39.50 bitrate=N/A speed=0.978x 
[dash @ 0x55e24ea4b640] Opening 'http://localhost:1935/dash/chunk-stream_video-%05d.webm' for writing